Door Installation in South Palm Beach - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across South Palm Beach

Replacing a door in South Palm Beach is not the same job as replacing one across the bridge in Lantana or Lake Worth. Everything here rusts faster because the town sits on a barrier island barely two blocks wide, with salt air coming at every structure from the Atlantic on one side and the Intracoastal Waterway on the other simultaneously. That means door hardware, frames, and weatherstripping fail early here unless they are specified for marine conditions. TruePane Windows & Doors installs entry doors, storm doors, French doors, and sliders throughout South Palm Beach with materials and hardware that hold up to this environment. Call (850) 801-5596 for a free estimate on Door Installation and we’ll walk you through exactly what your building needs.

Call (850) 801-5596

Why TruePane Windows & Doors Is South Palm Beach’s Preferred Door Installation Company

We have been doing glass and door work along the South Florida coast since 2008 through a craft tradition that founder Dale Kessler started long before TruePane was formally incorporated in 2008. The crews we send into South Palm Beach know what a salt-corroded hinge looks like after three years and what a bowed aluminum slider frame from 1968 looks like after fifty. That experience matters here more than almost anywhere in Palm Beach County.

Our South Palm Beach customers tell us the same thing: they want one company that shows up when it says it will, quotes upfront, and stands behind the work. Every TruePane job is covered by our Done Right Promise and The Keystone Standard, which means both manufacturer warranty layers are registered in writing before the truck leaves your driveway. That is not a pitch line. It is the way Dale has run this company since the first day.

A live person answers our phone 24 hours a day, seven days a week, including weekends and holidays. When you call about a door that will not latch or a slider that jumped the track in your South Palm Beach condo, you talk to a person who can schedule a uniformed, background-checked technician to come out. No voicemail trees and no regional call center.

Our Door Installation Services in South Palm Beach

We install and replace every kind of residential door common in South Palm Beach condominium buildings and the few single-family homes along the island. The work is done to HVHZ code and to the standards of your condo association where one applies.

Entry & Swing Doors

Most South Palm Beach buildings from the 1950s through the 1970s still have their original entry doors, and many of those are hollow metal units with corroded hinges and failing weatherstripping. We install impact-rated fiberglass and steel entry doors from PGT and CGI, and we spec stainless hinges and threshold hardware because standard zinc-coated components do not survive this salt air. Dale Kessler has taken apart enough corroded South Palm Beach door jambs to know what goes back in matters just as much as the door itself.

Double & French Doors

Double doors facing the Intracoastal in South Palm Beach get the same salt load as doors facing the ocean, and we treat them accordingly. We install and rebuild French doors with marine-grade hardware, sealed thresholds, and compression weatherstripping that still seals after years of exposure. If you are replacing an old outswing French door in a ground-floor condo near the water, we quote the hardware as a line item so you see exactly what you are paying for.

Storm Doors

A storm door in South Palm Beach does double duty: it protects your primary door from driven salt spray and adds a layer of impact protection depending on the spec. We install storm doors from Ply Gem and other manufacturers that hold up to the coastal environment, and we prime and seal the frame so salt-laden moisture does not wick into the rough opening. This is a door type where the cheap inland version fails within five years here.

Bifold & Folding Doors

Bifold and folding door systems are popular on South Palm Beach terraces facing the water, and they are also the most demanding to install correctly in this environment. The tracks and roller hardware must be stainless or marine-coated, and the frame must be perfectly square and plumb or the panels will bind within a few seasons. We shim, square, and anchor every folding door installation to code before we ever hang the panels.

Trusted Brands We Service in South Palm Beach

TruePane is an authorized installer for more than a dozen manufacturer lines, and for South Palm Beach work we commonly quote PGT, CGI, and Ply Gem because those manufacturers have product lines tested and approved for Florida’s High-Velocity Hurricane Zone. We bring manufacturer literature to every estimate and quote your options side by side on paper so you can compare impact ratings, warranty terms, and glass packages without pressure. When a South Palm Beach condo association requires a specific brand or approval letter, we handle that documentation too.

Common Door Installation Problems We See in South Palm Beach Homes

• Bowed aluminum slider frames on aging condo units. Decades of salt corrosion and coastal wind pressure warp original aluminum sliding glass door frames out of plumb, so the door binds or will not latch. We see this constantly along South Ocean Boulevard and in the older mid-century buildings. Fixing it requires custom shimming and sometimes frame fabrication before a new HVHZ unit can seat properly.
• Corroded hinges and lock hardware on both sides of the building. Non-marine-grade steel hinges and locks seize within three to five years in South Palm Beach because the salt attack comes from the ocean side and the Intracoastal side at once. We replace them with stainless steel hardware and coated fasteners, not whatever is cheapest at the supply house.
• Rot at wood door sills adjacent to paver patios. Salt-laden moisture wicks up from paver joints into the bottom rail of wood door frames, rotting the sill and breaking the seal required for HVHZ compliance. We rebuild the rough opening, install a sealed aluminum or composite sill pan, and set the new door on a marine-grade flashing system.
• Fogged or failing impact glazing in original doors. The seal between the laminated glass layers breaks down faster here than inland, especially in doors that face full afternoon sun over salt water. We replace the sash or the full door depending on the frame condition, and we register both warranty layers in writing before we leave.

Pricing for Door Installation in South Palm Beach, FL

Door Installation in South Palm Beach: The Salt and the Price Gap

Here is what nobody tells you until the second replacement: every structure in South Palm Beach sits within two blocks of salt water on both sides. The Atlantic Ocean eats at your door hardware from the east, and the Intracoastal Waterway does the same from the west. Compare that to a house in Lantana or Lake Worth, where the salt exposure is one-sided at best and often negligible a few blocks inland. A mainland installer can sell you a perfectly good door with standard zinc-coated hinges and call it done, and on the mainland that job will last a decade or more. In South Palm Beach, those same hinges will pit and seize within five years on an ocean-facing unit and not much longer on an Intracoastal-facing one.

The cheap door is not cheaper here. It costs less on the invoice and then costs more when the hardware fails and the frame needs to be pulled and reset. We price the coastal-spec job up front because it is the only honest way to quote this island. Stainless hinges, marine-grade threshold hardware, sealed sill pans, and flashing tape rated for salt exposure all add cost. That cost is roughly $250 to $600 more per opening than the inland version of the same job, and it buys you a door that still operates smoothly after a decade of two-sided salt spray. The alternative is paying for the same opening twice.

This is not theoretical. We recently replaced the original sliding glass doors in a 1960s oceanfront condo just off South Ocean Boulevard, where the aluminum frames had bowed nearly half an inch out of square from decades of salt corrosion and wind pressure. Our crew had to custom-shim the rough opening and refabricate the frame corners before seating a new Marvin impact-rated unit, and we used stainless steel fasteners and marine-grade flashing tape because the standard zinc hardware was already pitted with rust. That job took an extra day and it was the right way to do it. The Keystone Standard means we do not cut corners to make a schedule.

HVHZ Compliance and South Palm Beach Condo Requirements

South Palm Beach is almost entirely condominium buildings from the 1950s through the 1970s, many still carrying their original aluminum-frame sliding glass doors and single-pane windows from before Florida’s post-Andrew impact code mandates. That means a large and growing backlog of replacements that have to meet High-Velocity Hurricane Zone standards, and almost all of them must clear both Palm Beach County permitting and the individual condo association’s approval process. If your board requires a specific manufacturer, a specific architect, or a specific budget cap, we work within those constraints and produce the paperwork the association needs before trucks roll. Door Installation in South Palm Beach is not a side market for us, and we know these buildings and their requirements well enough to quote accurately the first time.

One thing to understand about HVHZ compliance: the standard is not satisfied by buying an impact-rated door slab. The frame, the anchoring, the fasteners, and the caulk bead all have to be spec’d and installed to code or the assembly does not carry the impact rating. When we install a door in South Palm Beach, the whole opening gets done to HVHZ standard, not just the visible parts.

We Also Serve Cities Near South Palm Beach

Our crews serve South Palm Beach and the surrounding area, including Palm Beach, Lake Worth Beach, Westgate, and Palm Springs. If you live across the bridge and you want the same door specified for coastal conditions, call us and ask for the salt-spec. We will quote it plainly.

FAQs - Door Installation in South Palm Beach