Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Palm Springs
Door installation in Palm Springs, FL typically runs $1,800 to $6,400 for a standard exterior door replacement, with impact-rated units starting around $2,900 and custom or arched doors reaching $12,000 or more depending on the opening. Most jobs take one to two days once permits clear Palm Beach County. Our crews work the village regularly, from the 1950s CBS ranch blocks off Greenbrier Drive to the acreage lots south of Forest Hill Boulevard, and we know what the county will ask for before we touch a threshold. Call (850) 801-5596 and we’ll scope it right the first time.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Door Installation Company
Dale Kessler founded TruePane in 2008, but the work goes back further than that. Years of glazing craft, and a second-generation tradesman’s habit of measuring twice, registering warranties in writing, and standing behind what leaves the truck. Palm Springs homeowners call us because the village’s compressed building era, nearly everything put up between the early 1950s and the mid-1970s, creates door problems a franchise crew doesn’t recognize until the inspection fails.
We’ve pulled rusted aluminum sliders from Florida rooms on Greenbrier Drive, reframed openings on Congress Avenue, and set impact-rated French doors on acreage where the septic and well setbacks dictate everything about the rough opening. Our technicians are background-checked and uniformed. They register both manufacturer warranty layers before leaving the driveway. And when you call, a live person answers. Not a voicemail tree. Not a callback form. That matters when the county inspector flags something at 4 p.m. on a Friday.
Our Door Installation Services in Palm Springs
Every Door Installation we do starts with the same question: what does Palm Beach County require for this opening, and what does the homeowner actually need from the door. In Palm Springs, those two answers rarely line up with a stock catalog. Here’s what we handle most often.
Entry & Swing Doors
A front door in Palm Springs has to do three jobs: seal against summer humidity, hold up in wind-borne debris conditions, and look right on a modest ranch house that was never meant to carry a showroom door. We install steel, fiberglass, and wood entry systems sized to the original framing, with impact-rated glazing where the opening requires it. On older CBS homes, we check the threshold height and slab condition before quoting. A settled slab off Greenbrier Drive changes the scope fast.
Double & French Doors
Double doors are a Palm Springs speciality, but not the easy kind. Enlarging a single opening to a double unit on an acreage lot means checking septic drain field and well setbacks before the saw comes out. Palm Beach County wants documentation, not promises. We pull the survey, measure the distances, and adjust the rough opening if the slab edge gets too close to underground systems. Then we flash the jambs correctly, because a double door on an open lot that doesn’t shed water will fail at the sill after one wet season.
Bifold & Folding Doors
Bifolds open a wall to a patio or pool deck, which sounds simple until the wind-load math starts. In Palm Springs, any permitted replacement opening must meet wind-borne debris region code. That means impact-rated panels or a documented shutter system. We quote both paths on paper so you can see the real difference in cost, glass thickness, and frame depth before you choose.
Pivot Doors
Pivot doors are heavy, and a heavy door on a 1960s wall needs more than a bigger hinge. We reinforce the header, check the concrete block condition, and set the pivot hardware to carry the load without sagging after the first year. Dale’s whiteboard rule has never changed: if the pane is not true, the job is not done. A pivot door out of plumb is a call nobody wants to make.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We’re an authorized installer for more than a dozen manufacturer lines, and in Palm Springs we stock local parts for the brands that show up most on the village’s older housing stock. Jeld-Wen and Milgard cover a good portion of the replacement market here, and Simonton comes up regularly on impact-rated retrofits. We quote lines side by side on paper so a homeowner sees exactly what they’re buying, down to the frame material and the glazing spec. No surprise substitutions at the truck.
Common Door Installation Problems We See in Palm Springs Homes
- Swapping a standard door for impact-rated without checking the wind-borne debris rules. Palm Springs sits roughly 5 miles inland, squarely in Palm Beach County’s wind-borne debris region. A door that doesn’t meet the glazing requirement fails inspection, and then the tear-out is on the homeowner’s dime.
- Setting a new door where grading and drainage haven’t been finished. Open lot or acreage, the wet season finds every low sill. We check the swale and the pad slope before we set anything. Water intrusion under a sill is a call that shouldn’t exist.
- Ignoring septic and well setbacks when widening an opening. A double door looks great until the slab edge creeps too close to a leach field and the county makes you move it. We pull the survey early so the rough opening never becomes a rework project.
- Replacing an aging slider without reframing the rotten jamb. Palm Springs humidity gets into the original aluminum frames on those 1950s and 1960s ranch homes. New door, old frame means the door binds in July. We reframe when the wood tells us to.
Pricing for Door Installation in Palm Springs, FL
Door installation costs in Palm Springs run higher than in neighboring cities because the county requirements don’t allow entry-level openings. A standard entry door replacement runs $1,800-$3,400. An impact-rated entry or French door adds glazing and frame upgrades, putting the job at $2,900-$6,400. Double doors with a widened opening and septic/well setbacks accounted for run $4,500-$9,000. Arched or fully custom work starts around $6,000 and can reach $12,000+ when the header, glazing, and finish work all shift.
What changes the price: opening size, impact-rating requirement, framing condition, and how close the slab sits to underground systems. We quote these line by line on paper before any work begins. Call (850) 801-5596 for a free estimate on your Palm Springs door. The estimate is the truth, in writing, and it won’t change once work starts.
We Also Serve Cities Near Palm Springs
Our crews work the wider Palm Springs area every week, including Palm Beach, Lake Worth Beach, Westgate, and Palm Beach Shores. The permitting and wind-load rules shift slightly from city to city, but the standard doesn’t. If the pane is not true, the job is not done.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Palm Springs
Yes. Palm Springs sits inside Florida’s wind-borne debris region, and any permitted exterior door replacement must use impact-rated glazing or be backed by a compliant shutter system. There is no workaround for an unrated opening, and the county inspects before signing off. Call (850) 801-5596 and we’ll pull the specific requirement for your address before quoting.
Florida insurers increasingly treat jalousie and louvered doors as uninsurable openings in wind-borne debris zones. Palm Springs has an unusually high concentration of these original 1950s and 1960s units, so the non-renewal notices hit this village hard. The fix is a permitted replacement to an impact-rated door, often paired with converting matching jalousie windows in the same room. We do this as a single permitted pull so one inspection covers the whole opening.
We pull the property survey first and measure the distance from the proposed slab edge to the drain field and well head. Palm Beach County requires documented setbacks before a threshold change is approved. If the opening gets too close, we narrow the rough opening or shift the door placement to stay compliant. The survey goes in the permit package, and the inspection passes because the paperwork matches the dirt.
We don’t grade the whole lot, but we do check the slab pad, swales, and sill height before setting a new door. If the grade slopes toward the threshold, we raise the sill or add a shallow drain so water doesn’t pool at the base after a wet season. On open acreage lots, this is the difference between a dry door and a rotted sill in two years. We flag it in the estimate, not after the first rain.
Yes. We order custom radius-topped doors, often through Jeld-Wen or Milgard, and spec impact-rated glazing in the arch. The header work on a 1960s CBS opening needs reinforcement to carry the new door cleanly, and the wind-load math has to be documented for the permit. We’ve done period-appropriate arched replacements throughout the village, and the doors hold true through hurricane season without looking like an afterthought.
Call (850) 801-5596 for a free estimate on any door in Palm Springs. A live person answers. We’ll measure the opening, check the county requirements, and hand you a written quote that stays a written quote.
Written by Dale Kessler, owner and second-generation glazier at TruePane Windows & Doors, serving Palm Springs, FL with the Keystone Standard: both warranty layers registered in writing, durations stated, and the Done Right Promise on every job.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.