Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across South Palm Beach
Sliding door replacement in South Palm Beach is a different job than it is ten minutes inland. Every building in town sits on a barrier island sliver barely two blocks wide, which means salt spray off the Atlantic and the Intracoastal hits both sides of every frame at once. Original aluminum sliders from the 1960s and 1970s corrode, bow, and seize here faster than almost anywhere else in Palm Beach County. We handle the full job: permit-ready HVHZ replacements, condo association coordination, custom shimming for openings that have drifted out of square, and manufacturer warranty registration before we leave the driveway. Call (850) 801-5596 and a live person answers, any hour.
Our Sliding & Patio Doors team covers every condo tower and low-rise building along South Ocean Boulevard and the Intracoastal side. If the pane is not true, the job is not done.
Why TruePane Windows & Doors Is South Palm Beach’s Preferred Sliding & Patio Doors Company
We have worked in enough South Palm Beach condo buildings to know what is behind the wall before we open it: salt-corroded fasteners, bowed original frames, and rough openings that haven’t been square since the Carter administration. That is not a sales pitch. It is the reason our technicians measure every opening twice and quote manufacturer lines side by side on paper before any work begins.
Homeowners here tend to have lived in their units for twenty years or more. They remember the contractor who left a fogged seal and a door that binds in July. They are not shopping for the cheapest bid. They want the work done right the first time by a company that will answer the phone if something goes wrong. That is the customer we built this company for. Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done.
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. Both manufacturer warranty layers get registered in writing, durations stated, before the truck leaves your South Palm Beach driveway. And the Done Right Promise covers the workmanship with no paperwork fights and no arguing.
Our Sliding & Patio Doors Services in South Palm Beach
Patio Sliding Doors
Standard patio sliders are the bread and butter of South Palm Beach condo work. Original aluminum-frame units from the 1950s through 1970s are nearly always out of code, and many have seals that failed years ago, letting salt-laden air permanently fog the glass and corrode the frame from inside. We replace them with HVHZ-rated impact units built for two-sided salt exposure. A typical patio sliding door replacement in South Palm Beach runs $2,800 to $6,500 depending on size, frame material, and manufacturer line.
Panoramic Sliding Systems
Panoramic systems use larger glass panels and slimmer frames to open a wall of light onto an ocean or Intracoastal view. In South Palm Beach, the question is usually structural: can the existing lintel and jamb carry the additional glass weight, and does the condo association allow the wider opening? We handle both answers. Where the building allows it, PGT and Andersen multi-panel units are common choices. Pricing for panoramic systems in South Palm Beach typically falls between $12,000 and $35,000 installed, with engineering and permit fees as the main variable.
Heavy-Duty Sliding Doors
Heavy-duty sliders are the workhorse for South Palm Beach’s older oceanfront towers. These units carry laminated impact glass that can weigh twice what the original 1968 aluminum door weighed. We custom-shim the rough opening to bring it back to plumb, rebuild the jambs where salt corrosion has eaten the original anchorage, and seat the new frame with flashing tape. Heavy-duty sliding door replacement in South Palm Beach generally runs $5,000 to $12,000 depending on panel count and whether the opening needs structural correction.
Pocket & Barn Doors
Pocket and barn door installations in South Palm Beach condos are usually about reclaiming floor space in rooms where a swinging door eats a walkway. But in these older buildings, the wall pocket almost always hides surprises: corroded rough framing, undersized headers, or plumbing and electrical that was never meant to be enclosed. We inspect before we cut, and any required repair gets priced and approved in writing before we touch it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in South Palm Beach
We are factory-authorized for PGT, CGI, and more than a dozen other lines. For South Palm Beach specifically, we recommend PGT and CGI impact-rated sliders as the standard because both manufacturers build for the HVHZ zone and hold up under persistent two-sided salt exposure. For homeowners who want the cleanest sightlines in a panoramic unit, Andersen’s fusion-welded frames resist the corrosion that destroys mechanically fastened aluminum over a decade or two. We quote manufacturer lines side by side on paper so you see exactly what you are buying, and we stock common hardware and rollers for local condo buildings to keep turnaround short.
Common Sliding & Patio Doors Problems We See in South Palm Beach Homes
- Salt-spray corrosion seizes the original tracks. The Atlantic on one side and the Intracoastal on the other means twice the airborne salt of a mainland home. Aluminum tracks pitted by decades of this jam the door open or, worse, shut during an evacuation.
- Bowed frames leave rough openings out of square. Coastal wind pressure combined with frame corrosion warps original sliders until they no longer sit plumb. A new HVHZ-rated unit will not seat or seal properly in that opening without custom shimming and jamb reconstruction.
- Failed insulated glass seals cause permanent fogging. When the edge seal on an original dual-pane unit lets go, salt-laden air gets between the panes. The fog doesn’t clean off, and the same air is quietly corroding the frame from the inside. Glass replacement alone won’t fix it; the whole unit needs replacement.
- Inoperable doors block hurricane shutter access. Many South Palm Beach condos still rely on manual shutters, which means the slider has to open fully, every time. A door that binds stops an evacuation plan cold.
Pricing for Sliding & Patio Doors in South Palm Beach, FL
What you pay in South Palm Beach depends on three things: the size of the opening, the condition of the rough framing, and the manufacturer line you select. Standard patio slider replacement runs $2,800 to $6,500. Heavy-duty sliders start around $5,000 and go to $12,000. Panoramic systems run $12,000 to $35,000 with engineering included. Condo association approval and Palm Beach County permit fees are separate line items we itemize up front, so nothing surprises you on the final bill. We show every number on paper before work begins. Call (850) 801-5596 for a written line-item estimate. Estimates are free, and seniors and veterans get a permanent 5% discount.
We Also Serve Cities Near South Palm Beach
Our crews work every day in Palm Beach, Lake Worth Beach, Westgate, and Palm Springs. Much of our South Palm Beach work comes from condo owners in neighboring buildings who saw a done-right install and asked who did it. Same crew standards, same warranty registration, same Done Right Promise, wherever the building sits.
Serving South Palm Beach, FL - Our Local Coverage Area
We’re based in the South Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in South Palm Beach
Every sliding door replacement in South Palm Beach requires a Palm Beach County permit because it changes a structural opening in an HVHZ zone, and your condo association has its own approval process because the door is part of the building envelope. We handle both. We pull the county permit, schedule the required inspections, and coordinate the association paperwork before we schedule your install date. Call (850) 801-5596 and we’ll walk you through what your specific building requires.
In almost every case, no. The fog means the edge seal has failed, and with it the insulating gas is gone. But the bigger problem is what the seal failure lets in: salt-laden air that corrodes the aluminum frame from inside. That frame now sits against an opening that has likely drifted out of square. Replacing only the glass leaves you with a failed frame and an opening that won’t meet code. The honest fix is a full unit replacement. Call (850) 801-5596 and we’ll give you a straight answer on your specific door, free.
We measure it, then we fix it. The process is custom shimming to bring the jamb back to plumb, rebuilding any anchorage that salt corrosion has eaten, and then seating the new HVHZ-rated frame with flashing tape and a continuous seal. We’ve done it in original 1960s towers off South Ocean Boulevard where a badly bowed aluminum slider had warped the rough opening by nearly three-quarters of an inch. The county inspector passed it on the first visit. If the pane is not true, the job is not done. Call (850) 801-5596 for an inspection and written scope of work.
It’s possible, but it is not universal. The limiting factor is rarely the width of the unit; it’s the structural lintel above the opening and whether the condo association will approve a larger glass footprint. In some 1960s buildings the header was never engineered for the weight of a multi-panel system, and in others the association simply won’t allow the exterior glazing change. Where it works, we handle the engineering, the permit, and the approval. Where it doesn’t, we’ll tell you before you spend a dollar. Call (850) 801-5596 and we’ll assess your specific unit.
Framing that was never water-managed. In original 1960s and 1970s condo construction, many slider rough openings were set directly into block or concrete with no flashing tape, no sill pan, and no weep system. Fifty years of wind-driven saltwater intrusion leaves corroded anchors, rotted wood blocking, and sometimes structural compromise that no one can see until the old door comes out. That is why our contracts include an allowance for opening repair, written in plain language, with any additional work priced and approved in writing before we proceed. Call (850) 801-5596 for a free estimate and we’ll show you exactly what we expect to find and what it costs if we do.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving South Palm Beach since 2008.
Ready to replace your sliding or patio door? Call (850) 801-5596 now for a free, written estimate. A live person answers, 24/7.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.