Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Lake Park
Door installation in Lake Park, FL typically runs $1,200-$4,800 depending on the door type, impact-rating requirements, and whether the rough opening needs modification. Most single entry door replacements in Lake Park homes take one day on site, and we pull the permit before the truck rolls. If you live in Lake Park, you already know the drill: the salt air off the lagoon eats hardware, and the code inspector wants impact-rated everything. Call (850) 801-5596 and we’ll walk you through exactly what your opening needs.
We’ve worked the blocks around Park Avenue, the quiet streets of Kelsey City, and the older CBS homes south of Northlake Boulevard. Lake Park is not like the newer tract developments inland. The homes here were built when jalousie windows and aluminum doors were standard, and that means every door job we quote comes with a conversation about wind-borne debris ratings and what the Palm Beach County inspector will look for. This isn’t a generic door page. This is Lake Park, done right.
Why TruePane Windows & Doors Is Lake Park’s Preferred Door Installation Company
Dale Kessler founded TruePane in 2008 after watching too many South Florida homes get out-of-true installs and voided warranties. Years of community service runs through this company, and we treat every Lake Park door like it’s going on our own mother’s house. That’s not a slogan. It’s the standard our background-checked, uniformed technicians work to every day.
Lake Park homeowners call us because we answer the phone. A live person, 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback form. When you call about a corroded entry door on a Kelsey City block, you get a real person who knows the difference between a Miami-Dade NOA and a Florida Product Approval and can tell you which one your inspector will ask for.
We quote manufacturer lines side by side on paper. Milgard next to Jeld-Wen next to PGT. You see the numbers, the warranty durations, and the exact impact rating before you sign anything. That’s The Keystone Standard, and it means both warranty layers get registered in writing before the truck leaves your driveway. No paperwork fights. No fine print that covers neither.
Our Door Installation Services in Lake Park
Impact-Rated Entry & Swing Doors
Every exterior door in Lake Park sits inside the Palm Beach County wind-borne debris region. That means the Florida Building Code requires impact-rated glazing or an approved shutter system on every opening. We install entry and swing doors that carry the right design pressure ratings for Lake Park’s wind zone, and we document the compliance for your wind mitigation report. A standard door from a big-box store will not pass inspection here. We make sure yours does.
Double & French Doors
Double doors and French doors in Lake Park’s older CBS homes rarely fit standard rough openings. We measure every opening twice, then order to the actual dimensions, not the closest stock size. Salt air from the Lake Worth Lagoon means we spec marine-grade aluminum or properly finished frames, because non-marine hardware on a French door facing the Intracoastal will show corrosion within two or three years. We’ve seen it too many times to let it happen on our install.
Bifold & Folding Doors
Bifold doors are popular in Lake Park for patio access and interior room dividers, but exterior applications need the same wind-load rating as any other opening. We install folding door systems with impact-rated glazing and heavy-duty tracks that hold up to coastal humidity. If you’re opening a wall facing the lagoon, the engineering matters more than the look. We get both right.
Pivot Doors
Pivot doors make a statement, but in Lake Park they also need to meet the same Florida Building Code wind-borne debris requirements as a standard swing door. We’ve installed pivot doors on custom homes near the waterfront where the opening was non-standard and the frame needed reinforcement. The Keystone Standard applies here too: both warranty layers registered in writing, durations stated, before we leave the driveway.
Storm Doors
A storm door in Lake Park is not decorative. It’s a code compliance tool when paired with approved hurricane panels. We install storm doors that accept the panel systems the Palm Beach County inspector will accept, and we walk you through how to document that compliance for your insurance file. If you’re keeping an older primary door but need the wind-born debris box checked, this is the path.
Arched & Custom Doors
Lake Park’s 1940s and 1950s homes sometimes have arched or eyebrow openings that no stock door will fit. A box-store replacement gets framed square and the character goes with it. We order custom arched doors built to the actual opening, with the right impact glazing and the right finish for a salt-spray zone. It costs more than a stock slab, but it’s the difference between a door that looks like it belongs and a patch job that leaks in July.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Park
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For Lake Park specifically, we recommend Milgard and Jeld-Wen impact-rated lines for most CBS home openings because the design pressures work, the warranties hold up in coastal conditions, and we can get replacement hardware fast when you need it. We also work with Simonton and Ply Gem where the opening and budget call for it. We quote side by side on paper so you can see exactly what you’re buying and what each line costs.
Common Door Installation Problems We See in Lake Park Homes
- Salt-corroded jambs and hinges: The Lake Worth Lagoon puts chronic salt spray on everything within a mile of the water. Doors that were never spec’d for marine exposure show pitted hinges, seized jambs, and frame corrosion within a few years. We see it constantly on the older blocks near Park Avenue.
- Jalousie and single-pane aluminum doors that fail wind-borne debris inspection: Open a permit for any door replacement in Lake Park and the inspector will look at the entire opening. Original jalousie doors from the 1950s have zero missile impact resistance. Many jobs that start as a simple door swap become a full impact-rated opening upgrade.
- Non-standard rough openings on post-WWII CBS homes: The concrete block and stucco houses built between the 1940s and 1970s rarely have plumb, square, standard-sized openings. Forcing a stock door into one leaves gaps that let wind-driven rain and salt air into the wall cavity, which rots furring strips and breeds mold.
- Cheap replacements that skip the marine-grade finish: A door that costs $800 less but uses standard aluminum hardware will show frame corrosion and seal failure within two or three storm seasons. By the time the homeowner notices, the warranty has a coastal-exposure exclusion and the manufacturer is gone. We won’t let you buy that door.
Pricing for Door Installation in Lake Park, FL
Here’s what we actually see in Lake Park. A standard impact-rated entry door replacement on a CBS home runs $1,800-$3,600 installed. Double French doors with impact glazing run $3,200-$6,500 depending on opening width and whether we’re rebuilding the rough opening. A custom arched door for a 1950s home starts around $4,000 and goes up from there. Storm doors with approved hurricane panels typically land between $900 and $2,400. What moves the number: the wind-load rating required, whether the existing jamb is salvageable, whether the opening is standard or needs modification, and which manufacturer line you choose. We give you line-item pricing on paper before you sign, and the price we quote is the price you pay. No change orders, no surprise line items. Call (850) 801-5596 to schedule a free estimate for your Lake Park home.
One more thing Lake Park homeowners should know: a compliant quote includes the permit and the inspection. A cheap quote that skips the permit or “handles it later” is a quote that leaves you holding a failed inspection and a second permit fee. We pull the permit, we schedule the inspection, and we stand behind the work with our Done Right Promise. If it’s not done right, we make it right. No paperwork, no arguing.
We Also Serve Cities Near Lake Park
We cover Lake Park and the surrounding communities: Palm Beach, Lake Worth Beach, Westgate, and Palm Springs. If you’re in one of those areas and need Door Installation from a company that understands coastal wind-load requirements, call (850) 801-5596. Our crews serve Lake Park locally and know the permitting process for Palm Beach County inside out.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Lake Park
Lake Park sits entirely within the Palm Beach County wind-borne debris region, so any new exterior door must carry an impact-rated glazing approval or be protected by an approved shutter system that meets Florida Building Code requirements. In practice, that means the door assembly needs a Florida Product Approval or Miami-Dade NOA showing it passed missile impact testing for the design pressure required in Lake Park’s wind zone. Your inspector will check this before final sign-off. Call (850) 801-5596 and we’ll tell you exactly what your opening needs and show you the approval documents in writing.
It can, but only if the compliance is documented. When we install an impact-rated door in Lake Park, we provide the paperwork your wind mitigation report needs: the product approval number, the installation method, and the permit record after inspection passes. Insurance carriers in Florida re-rate homes based on that documented mitigation, not on the fact that a new door was installed. A door installed without that paper trail does nothing for your premium. We make sure the documentation is complete before we leave.
Because opening a permit for a door replacement triggers a review of the entire opening and often the adjacent windows. Lake Park’s stock of 1940s-1960s CBS homes still has original jalousie or single-pane aluminum windows that fail wind-borne debris compliance. The inspector won’t finalize a new impact door while the window next to it is a non-compliant louver unit. We tell homeowners this before we quote the door, not after the permit is open. The conversation starts with what the opening needs, and sometimes that means addressing the window at the same time.
The lagoon’s salt spray accelerates corrosion on aluminum frames, hinges, and handles that aren’t spec’d for marine exposure. We’ve seen pitted hardware and seized jambs on doors installed less than three years before, and the failure mode is predictable: standard aluminum alloy plus coastal salt equals white powder corrosion and seal breakdown. We spec marine-grade finishes and stainless hardware on every Lake Park door, and we tell you which manufacturer lines hold up in this environment. It costs a little more up front and saves a full replacement in a few years.
A compliant quote for an older Lake Park CBS home should include the permit fee, the impact-rated door assembly with a Florida Product Approval or Miami-Dade NOA, rough-opening modification if the opening is non-standard, flashing and sealing to prevent wind-driven rain intrusion, installation by a licensed contractor, and the inspection scheduling. If a quote omits any of those, it’s a quote for a door that won’t pass final inspection. We put every line item on paper before you sign. Call (850) 801-5596 and we’ll walk your specific opening with you measure by measure.
When you’re ready to replace a door in Lake Park, call (850) 801-5596. We’ll answer live, answer your questions straight, and schedule a free estimate with a technician who measures twice and quotes manufacturer lines side by side. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Park with doors installed to code and seawall-hard hardware that holds up.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.