Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Palm Beach Shores
Door installation in Palm Beach Shores, FL follows a stricter set of rules than almost anywhere else in the county. Every opening has to meet High-Velocity Hurricane Zone impact requirements, and the salt air coming off both the Atlantic and the Lake Worth Lagoon means hardware corrodes years faster than it does five miles inland on the mainland. We plan for both on every job, which is why our quotes for Palm Beach Shores work include marine-grade hardware and pressure-equalized framing as standard, not as upgrades. If you’re replacing an entry door, a storm door, or a full set of impact doors, call (850) 801-5596 and we’ll walk the property, measure every opening twice, and put a written line-item quote in your hand before we leave.
Why TruePane Windows & Doors Is Palm Beach Shores’s Preferred Door Installation Company
Dale Kessler founded TruePane Windows & Doors in 2008 with a rule that still governs every install we do: if the pane is not true, the job is not done. That standard applies to the door slabs, the jamb, the hardware, the flashing, and the warranty paperwork. Palm Beach Shores homeowners call us because the door that fits square and seals tight is the door that survives a barrier island summer without binding in July or leaking in September. We’re not the cheapest bid in town, and we don’t try to be. We’re the company that answers the phone when you call, sends a background-checked uniformed technician who measures everything twice, and registers both manufacturer warranty layers in writing before the truck leaves your driveway.
Our crews work in Palm Beach Shores on a regular rotation, coordinating from our South Florida office so scheduling stays tight and predictable. You tell us the day, we’re there when we say. That’s not a slogan; it’s how we run a schedule. And after the door is set, the workmanship is covered by the Done Right Promise. If something isn’t right, we make it right. No paperwork fights, no arguing.
Our Door Installation Services in Palm Beach Shores
TruePane installs and replaces residential doors across Palm Beach Shores, from the ranch homes off Inlet Way to the high-rise condos along the oceanfront. Every project starts with a free estimate, a conversation about what the door needs to do in a salt-exposed, hurricane-zone building, and a written quote with manufacturer lines compared side by side. Here are the door types we handle most often in this town.
Entry & Swing Doors
Most Palm Beach Shores ranch homes were built between the 1950s and 1970s, and a lot still have their original front doors with aluminum jambs that are corroding from the inside out. We replace them with impact-rated fiberglass or steel entry systems, reframing the rough opening when it’s out of square or undersized for current code. In this climate, we spec marine-grade stainless hinges and a pressure-equalized sill pan on every entry door, because the standard hardware that works in West Palm Beach will seize or powder within a few years of barrier island salt exposure.
Double & French Doors
Double doors bring their own set of problems in Palm Beach Shores. The center joint is where wind-driven rain finds its way in first, especially when the original astragal is aluminum and the weatherstripping has hardened in the salt air. We install fusion-welded impact-rated French door systems with reinforced center mullions, interlocking astragals, and butyl-tape flashing around the full perimeter. We also check the rough opening for signs of rot before the new unit goes in, because a French door that leaked for years often rotted the framing behind it.
Bifold & Folding Doors
Folding glass walls are popular in the newer condo builds and a handful of renovated oceanfront properties on Singer Island. They also demand more from their hardware than any other door style. In Palm Beach Shores, that means stainless steel rollers, tracks, and pivots, not the standard zinc or aluminum parts that corrode quickly here. We install bifold and folding door systems that meet HVHZ impact requirements and are tuned to operate smoothly with one hand, even after a season of salt spray.
Pivot Doors
Pivot doors show up in the custom homes and high-end condos in Palm Beach Shores, and they’re a different animal entirely. A pivot door hangs its entire weight on a top and bottom pivot hinge, which means the framing and floor anchoring have to be dead-level and dead-plumb. We measure, fabricate, and install custom pivot doors in this town to within an eighth of an inch, because a pivot door that’s even slightly off will sag, scrape, or fail to latch within the first year. Salt exposure makes it worse, so all pivot hardware we specify is marine-grade stainless.
We also install Door Installation products across the full TruePane catalog, including storm doors, arched doors, and fully custom builds.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Beach Shores
We’re an authorized installer for more than a dozen manufacturer lines, and in Palm Beach Shores we lean on the ones that hold up best under salt and wind. That includes impact-rated product from PGT, CGI, and Marvin, plus energy-efficient lines from Milgard and Jeld-Wen where the HOA or building department allows non-impact-rated glazing on interior or protected openings. When you call us for Door Installation in Palm Beach Shores, we’ll quote at least two manufacturer lines on paper so you can see exactly what you’re buying, and we’ll order from the supplier route that gets your door to this barrier island fastest.
Common Door Installation Problems We See in Palm Beach Shores Homes
- Salt-corroded hinges and thresholds that seize. The salt air here arrives from both the ocean and the lagoon, which means door hardware corrodes in every direction at once. A steel hinge that would last fifteen years in Lake Worth Beach might bind or snap in five years here. We replace hardware with marine-grade stainless as standard on every Palm Beach Shores job.
- Wind-driven rain entering around the jamb. Older ranch homes in town often have door openings with no flashing tape and no sill pan. During a summer squall, water gets pushed through the gap between the jamb and the rough opening and rots the framing. We strip the old trim, inspect the rough opening, and flash the perimeter properly before setting the new door.
- Failed impact glazing seals on condo doors. Impact-rated door glass degrades faster in constant salt spray, and in Palm Beach Shores high-rises a single failed seal can turn into a water-intrusion insurance claim. When one unit’s door seal fails, we work with the HOA and property manager to schedule the replacement, which sometimes expands into a full-building project under strict association rules.
- Out-of-square rough openings on mid-century homes. The ranches built during Singer Island’s development boom have settled and shifted over sixty-plus years. We’ve opened walls on Inlet Way and found door rough openings an inch and a half out of square. A properly installed door starts with a reframed, shimmed, and insulated rough opening, not just a new slab hung in an old hole.
Pricing for Door Installation in Palm Beach Shores, FL
Door installation in Palm Beach Shores costs more than it does in mainland Palm Beach County, and the reasons are specific: every opening needs HVHZ impact-rated product, salt-safe marine hardware, and often reframing work on older homes. A standard entry door replacement on a mid-century ranch here typically runs $2,800 to $5,500, depending on the door material and whether the rough opening needs correction. Impact-rated French or double doors run $6,000 to $12,000 installed. Pivot doors start around $7,500 and go up with custom sizing and hardware. Storm doors are $900 to $2,200. Every one of these ranges assumes the existing opening is in usable condition; if reframing or rotted sheathing repair is required, we write that allowance into the contract before we start, not after. Get your free estimate by calling (850) 801-5596.
We Also Serve Cities Near Palm Beach Shores
Our crews handle door installation and replacement across the neighboring coastal and mainland communities. That includes Palm Beach, Lake Worth Beach, Westgate, and Palm Springs. If you’re just over the bridge, the same standards apply: marine-grade hardware where salt reaches, impact-rated product where the code requires it, and the Done Right Promise on every job.
Serving Palm Beach Shores, FL - Our Local Coverage Area
We’re based in the Palm Beach Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Palm Beach Shores
Yes, with very few exceptions. Palm Beach Shores sits entirely within Florida’s High-Velocity Hurricane Zone, and the building code requires impact-rated doors with the appropriate design pressure rating for every exterior opening on every residential building in town. That applies to single-family ranch homes, townhouses, and every condominium tower. Call (850) 801-5596 and we’ll confirm the exact design pressure your opening requires before you buy anything.
When we pull a permit for a door replacement on an older Palm Beach Shores home, the building department checks the rough opening, the existing framing, and the code compliance of the entire opening. That often means the framing gets brought up to current requirements, the rough opening gets corrected for plumb and square, and the flashing gets updated to current standards. We inspect first and write any code-triggered work into the contract as a line-item allowance, so the permit doesn’t surprise you halfway through the job.
We work directly with the HOA and the property manager from the start, so the schedule, the elevator time, the materials staging, and the window of work are all agreed in writing before the door arrives. Palm Beach Shores condo associations run tight scheduling for good reason: a single unit’s door work can trigger a building-wide impact replacement project. We’ve handled single-unit replacements and coordinated multi-unit projects under strict association rules, and we keep the HOA updated with written documentation of both warranty layers registered on every unit.
Because Palm Beach Shores is a barrier island with saltwater on both sides at all times. West Palm Beach sits on the mainland, where salt exposure comes mostly from the east during storms. In Palm Beach Shores, salt-laden air from the Lake Worth Lagoon hits the west side of your door while ocean air hits the east side. That 360-degree salt exposure accelerates galvanic corrosion on steel hinges, aluminum thresholds, and standard-grade hardware significantly. We spec marine-grade stainless hardware on every exterior door install here, which is the difference between a door that operates smoothly for decades and one that binds in three years. Call (850) 801-5596 for an exact quote on your door.
In most Palm Beach Shores cases, a failed insulated glass unit on an impact-rated door can be replaced without replacing the entire door, but only if the frame, hinges, and weatherstripping are still sound. If the frame is aluminum and has been corroding in the salt air, or if the door predates current HVHZ impact code, full replacement is usually the right call. We’ll tell you straight which path makes sense for your door after we inspect it. Estimates are free at (850) 801-5596.
Key Takeaways
- Palm Beach Shores sits on a narrow barrier island with saltwater exposure from both the Atlantic and the Lake Worth Lagoon, so door hardware and frames corrode faster here than anywhere else in Palm Beach County.
- Every exterior door replacement in town must meet High-Velocity Hurricane Zone impact requirements, full stop.
- Standard door installation ranges for Palm Beach Shores run from $900 for a storm door to $12,000+ for impact-rated French doors or custom pivot doors.
- Older ranch homes often need rough-opening correction and reframing before a new door can be set square and sealed.
- TruePane’s Done Right Promise and The Keystone Standard cover every Palm Beach Shores door install, with both manufacturer warranty layers registered in writing.
Contact TruePane Windows & Doors for Your Palm Beach Shores Door Installation
If you’re ready to replace the door that’s binding, leaking, or failing under the salt air, call us at (850) 801-5596. We’ll schedule a free estimate, walk the property with you, measure every opening twice, and hand you a written line-item quote that spells out the door, the hardware, the flashing, and the warranty. No surprises on the bill, no change orders after the fact. A live person answers the phone twenty-four hours a day, seven days a week. Call (850) 801-5596.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach Shores with the Done Right Promise and The Keystone Standard.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.