Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Lake Worth Beach
A standard entry door replacement in Lake Worth Beach typically runs $2,200 to $5,400 installed, while a full impact-rated door with custom millwork in the historic district usually lands between $4,800 and $9,500 depending on sight-line requirements set by the Historic Preservation Board. Most jobs take one to two days once the unit arrives from the manufacturer. If you’re weighing a door replacement anywhere in Lake Worth Beach, call (850) 801-5596 and we’ll walk the project with you in plain language before any number gets written down.
TruePane has worked the door openings of this city long enough to know that no two Lake Worth Beach homes take a door the same way. A 1930s Mediterranean Revival off Lucerne Avenue needs something very different from a 2004 condo unit on the Intracoastal side. What stays constant is the standard we hold: the door is plumb, the threshold is sealed, the hardware is stainless, and both warranty layers are registered in writing before our truck leaves your driveway.
Why TruePane Windows & Doors Is Lake Worth Beach’s Preferred Door Installation Company
We’re the shop run by second-generation glazier Dale Kessler. Dale founded TruePane in 2008 on a rule that still hangs in the work bay: if the pane is not true, the job is not done. That rule applies to every door slab, every jamb, every threshold, and every hinge leaf we set in Lake Worth Beach. Homeowners here tend to know exactly what happened to their last door, and they’re not looking for a bid-war. They’re looking for the last call they’ll have to make on that opening.
Our technicians are background-checked and uniformed. They measure every opening twice before anything is ordered. They quote manufacturer lines side by side on paper so you see what you’re buying, rather than hearing a name thrown across a patio. Lake Worth Beach residents deal with salt air, wood rot, impact-code enforcement, and the Historic Preservation Board. We’ve stood in front of that board more times than most contractors in this city have pulled permits. We know what passes, and we know what gets sent back for revision.
When you call TruePane, a person answers. Not a phone tree, not a regional call center, not a callback promise. That matters in Lake Worth Beach, where a door that’s failed its latch or its seal isn’t something you want to sit on. Call (850) 801-5596 and we’ll talk about your opening like the tradespeople we are.
Our Door Installation Services in Lake Worth Beach
Entry & Swing Doors
Most Lake Worth Beach homes built before 1960 still carry their original wood entry door or a replacement that’s already sagged at the hinges. We pull the old slab, check the rough opening for rot, and set a square, plumb unit with a threshold that doesn’t invite water. For historic-district properties, we pre-select impact-rated wood doors with simulated divided-light profiles that the Historic Preservation Board will accept without a revision cycle.
Double & French Doors
A double door on a Lake Worth Beach lanai or patio catches wind from two directions and salt from one. The center astragal, the active leaf alignment, the top pin, and the bottom sweep all have to work as one system. We set pairs from Marvin, PGT, and other lines we’re authorized for, with stainless steel hinges and adjustable sills. We also fix pairs that have gone out of alignment rather than condemning them outright.
Bifold & Folding Doors
Bifold and folding door systems are popular on the Intracoastal-facing condos and newer infill homes in Lake Worth Beach, where owners want the entire wall to open. These units take a lot of abuse from salt-laden wind, and the track hardware is where they fail first. We convert worn roller systems to marine-grade parts and adjust panel runs so the door folds on its line without dragging.
Pivot Doors
A pivot door is a statement piece. It’s also a structural point load, and if the pivot box isn’t blocked and shimmed correctly, the slab will bind within a season or two. We’ve installed pivot doors on new construction and gut renovations around Lake Worth Beach, always with engineered floor attachments and a stainless pivot set. This is not a door to trust to a crew that’s never hung one before.
We also handle Door Installation service across every style listed here, plus storm doors and fully custom arched units. Every door we install in Lake Worth Beach gets measured twice, set square, and registered with both manufacturer warranty layers before we finish the day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Worth Beach
We’re an authorized installer for more than a dozen manufacturer lines, and for Lake Worth Beach, we lean on the brands that hold up to coastal conditions: Marvin for wood impact-rated entries with HPB-friendly profiles, PGT for impact-rated sliders and French doors, and CGI for aluminum-framed units on concrete-block homes near the lagoon. We don’t chase whatever line is on sale that month. We quote PGT side by side with Marvin on paper so you can see the price gap and what it buys you in frame construction and glass package.
Because we handle warranty registration in writing before we leave, a manufacturer defect in Lake Worth Beach gets handled as a warranty claim with the paperwork already in order, not a phone battle three years after the fact.
Common Door Installation Problems We See in Lake Worth Beach Homes
- Salt-corroded aluminum sliding door frames. Units within a block or two of the Lake Worth Lagoon lose their roller bearings and track finish fast. The fix isn’t a new roller set on a pitted track; it’s a replacement unit with marine-grade hardware and a stainless track system.
- Historic wood doors with failed single-pane seals. The 1920s-to-1940s housing stock around Lake and Lucerne Avenues still carries wood doors with glass that fogs and leaks air. Replacing just the slab without addressing the jamb and weatherseal means you’ll do the job twice.
- Non-impact doors installed before the wind-zone updates. Palm Beach County’s 160-mph design wind speed standard is enforced on new permits, but lots of Lake Worth Beach homes still have pre-code doors that won’t pass an inspection or a hurricane event. We replace them with Miami-Dade approved units that clear code the first time.
- Threshold rot at the sill. Lake Worth Beach’s combination of afternoon rain bursts and standing humidity rots unsealed wood thresholds and the subfloor below them. We pull the old sill, inspect the framing, and flash the opening before the new door drops in.
Pricing for Door Installation in Lake Worth Beach, FL
Here’s what we’re seeing in Lake Worth Beach right now. A standard entry door replacement, including slab, hardware, and basic trim, runs $2,200 to $4,200. A full-frame replacement on an older home with rot repair starts around $3,800 and can reach $6,500. Impact-rated entry doors with custom profiles for the historic district land between $4,800 and $9,500. A patio slider or French door replacement along the Intracoastal side runs $3,500 to $7,800 depending on glass package and frame material. Custom arched or pivot work is quoted per project after we measure.
The price gap between a coastal-spec and an inland-spec door is real: stainless hinges, a marine-grade threshold, and a Miami-Dade approved unit add $800 to $1,800 to the material line. The cheap spec fails within a decade here. The coastal spec is the honest number. Call (850) 801-5596 and we’ll give you that number in writing for free.
We Also Serve Cities Near Lake Worth Beach
TruePane crews serve the full coastal strip around Lake Worth Beach. If you’re in Palm Beach, Westgate, Palm Springs, or Palm Beach Shores, the same truck, the same technicians, and the same warranty paperwork apply. For more on our work across this area, see our Door Installation in Lake Worth Beach service area detail. Dispatch and scheduling are coordinated from our metro office, but every crew working your opening lives within a short drive of your front door.
Serving Lake Worth Beach, FL - Our Local Coverage Area
We’re based in the Lake Worth Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Lake Worth Beach
A permit is required for exterior door replacement in Lake Worth Beach, and if your property sits within the city’s designated historic district, the Historic Preservation Board may review the unit’s profile, sight lines, glass pattern, and finish before you can pull that permit. We handle the application and submittal for you, and we pre-select units that clear HPB standards without a revision cycle. Call (850) 801-5596 if you want us to check whether your address falls in the review zone.
Stainless steel hardware is the only honest answer in Lake Worth Beach. Anything plated, laquered, or zinc-based will corrode within years. We specify 316 stainless hinges, multipoint locksets, and threshold screws on every exterior door we install here, and we won’t put a hardware spec in front of you that we know won’t last. Call (850) 801-5596 for a hardware recommendation on your specific opening.
If you’re replacing an exterior door and pulling a permit, yes. Lake Worth Beach sits inside Palm Beach County’s 160-mph design wind speed zone, and replaced openings must carry Miami-Dade Product Approval. If you’re only swapping the slab and the existing frame stays, the code question changes, but we still recommend n impact-rated unit on any opening that faces the prevailing east wind. Call (850) 801-5596 and we’ll tell you exactly what code requires for your address.
Because constant salt spray eats the roller bearings, pits the aluminum track, and siezes the guide hardware within a few years of installation. The standard inland-spec door was never designed for that environment. We replace those failures with fusion-welded frames, stainless roller assemblies, and marine-grade finishes that hold up instead of dissolving. Call (850) 801-5596 and we’ll tell you whether your failing slider is worth repairing or replacing.
Fog between the panes, condensation that won’t wipe away, or visible streaks on the inside face of the glass all point to a blown insulated glass unit. The fix is a new door or a factory-reglaze, not a cleaning crew. Call (850) 801-5596 for a quick diagnostic over the phone, and we’ll tell you the straight truth about whether the unit’s still under warranty before you spend a dime.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Worth Beach with a 42-year craft tradition and a Done Right Promise on every opening.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.