Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Ocean Ridge
Window replacement in Ocean Ridge carries a set of requirements you won’t find a mile inland. Every home in this town sits on a barrier island with the Atlantic on one side and the Intracoastal on the other, which means replacement windows have to meet Florida Building Code wind-load and impact standards while standing up to salt air from two directions at once. TruePane Windows & Doors has been doing exactly that work across Ocean Ridge for years, and we answer the phone when you call. Reach us at (850) 801-5596 to schedule a free estimate, and we’ll walk you through what your specific openings actually need.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Window Replacement Company
Ocean Ridge homeowners tend to ask sharper questions than most, and that suits us. We’re the company that shows you the Florida Product Approval number on the glass, explains which wind-load rating your elevation requires, and hands you a written quote you can compare line by line. The work is done by our own background-checked, uniformed technicians, not subcontracted crews you’ll never see again. Dale Kessler founded TruePane in 2008 on a simple rule: if the pane is not true, the job is not done. We’ve registered both manufacturer warranty layers in writing on every Ocean Ridge job since, and we put the Done Right Promise behind every install without fine print or argument.
We know the difference between a 1950s CBS ranch on Spanish River Drive and a newer luxury build on the ocean side, because we’ve measured both. That local knowledge is not a marketing line. It’s the difference between quoting the right flashing detail and finding out three months later that wind-driven rain found its way behind the frame. We’ll be there when we say, measure each opening twice, and leave the warranty paperwork in your hand before the truck pulls out of the driveway.
Our Window Replacement Services in Ocean Ridge
Our Window Replacement team handles the full scope of work Ocean Ridge homes require, from full tear-outs on original openings to precise insert retrofits. Here’s how each service applies to this town specifically.
Full Frame Replacement
Most older Ocean Ridge homes need the whole opening rebuilt, not just a sash swap. Full frame replacement means we remove the existing window down to the rough opening, correct any water damage or rotted framing, flash the perimeter properly, and set the new impact-rated unit into a clean, square opening. On the 1950s and 1960s CBS stock that dominates the interior streets, we regularly find the original window frames were set directly into the block with no flashing at all. In Ocean Ridge, where wind-driven rain hits hard from the ocean side, that old approach leaks. Full-frame work lets us fix the opening correctly before the new window goes in, and it’s the only path to full code compliance when the original framing is compromised.
Insert Window Replacement
If the existing frame is still square and solid, an insert replacement fits a new window into the old frame without disturbing the surrounding stucco or interior trim. This works well on newer Ocean Ridge construction from the 1990s onward, where the original frames were installed with better flashing and the openings haven’t shifted. Insert work is less invasive and typically costs less than a full tear-out. But in an older CBS home, we’ll always check the condition of the frame and the flashing before recommending inserts, because an insert in a rotted frame is a waste of money no matter how good the window itself is.
Storm Window Replacement
Storm windows seem like a budget shortcut in Ocean Ridge until you understand what the code requires. A true storm window is not the same as an impact-rated window system, and in this town’s coastal high-wind zone, storm windows alone rarely satisfy Florida Building Code or your insurer. Where we do install them is as a secondary glazing layer over historically significant windows that cannot be altered under Ocean Ridge’s preservation expectations. But when someone calls us asking about storm windows for ordinary replacement work, we’re direct about what the local building department will accept before we write a quote. You’ll know exactly what’s compliant and what isn’t.
Energy-Efficient Upgrade
Ocean Ridge electricity bills climb fast when original jalousie windows let conditioned air pour straight out. Energy-efficient replacements with low-E glass, argon fill, and properly sealed frames cut that load substantially, and they are the standard choice on nearly every job we quote here. The salt-air realities of the barrier island mean the frames and hardware matter just as much as the glass. We spec marine-grade finishes and stainless hardware on every energy upgrade in Ocean Ridge, because a thermally efficient window with corroded locks is not an upgrade at all.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
We’re an authorized installer for more than a dozen manufacturer lines, and for Ocean Ridge specifically we lean on PGT, CGI products engineered for Florida’s coastal wind-load requirements. These are not generic national windows with a Florida label; they are purpose-built for impact resistance, and they carry the Miami-Dade NOA or Florida Product Approval documentation your building department and insurer want to see. When you get a quote from us, you’ll see manufacturer lines side by side on paper with real numbers, not a vague “premium window” line item. That’s a square deal, and it’s the only way we quote.
Common Window Replacement Problems We See in Ocean Ridge Homes
- Original jalousie windows failing every standard. The louvered glass windows on pre-AC Ocean Ridge homes were built for cross-breeze, not hurricanes. They offer essentially no impact resistance, they seal poorly, and they are the single most common replacement item we see whenever a homeowner pulls a permit for a substantial renovation on the interior streets.
- Salt corrosion on hardware from both water bodies. Hardware that never touches salt spray on the mainland corrodes within a few years in Ocean Ridge. We see jammed sashes, frozen locks, and snap-broken cranks on windows less than a decade old because the hardware was not marine-grade. East side, west side, it doesn’t matter here – the salt reaches everything.
- Failed flashing on retrofits from previous contractors. Ocean Ridge’s older CBS openings were frequently flashed incorrectly on the first retrofit, which means wind-driven rain penetrates around the frame and stains interior drywall or cracks stucco after the first strong squall. By the time we’re called, the window itself might still work, but the opening needs to be rebuilt properly.
- Fogged double-pane seals from constant thermal cycling. The barrier island’s combination of high humidity and intense sun makes failed seals show up earlier here than nearly anywhere else. A fogged window is a dead window, and in Ocean Ridge it usually means the frame and hardware are ready for replacement too.
Pricing for Window Replacement in Ocean Ridge, FL
A full frame impact-rated window replacement in Ocean Ridge typically runs $1,000 to $2,200 per opening, with insert retrofits ranging roughly $700 to $1,500 per opening, depending on glass type, frame material, and size. Storm-rated secondary glazing runs lower, around $350 to $650 per unit, but as stated above, it rarely satisfies code on its own. Larger jobs – say, a full house of twelve to twenty openings – are generally quoted at a better per-unit price, and we give you that number in writing before any work starts. The biggest variables in Ocean Ridge are the wind-load rating your elevation requires and whether we find framing damage once the old window comes out. Call (850) 801-5596 for a free, written line-item estimate, and we will not surprise you with change orders later.
We Also Serve Cities Near Ocean Ridge
TruePane’s crews work up and down the Palm Beach County coast from Ocean Ridge to Palm Beach, Lake Worth Beach, Westgate, and Palm Springs. If you’re just over the bridge in Boynton Beach or a few minutes south, the same team that knows the barrier-island salt-air requirements can quote your job with equal precision.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Ocean Ridge
Ocean Ridge falls within Palm Beach County’s coastal high-wind design zone, which means replacement windows and doors must carry Miami-Dade NOA or Florida Product Approval documentation showing they meet the design wind pressure for your specific elevation and exposure category. You verify compliance by asking your contractor for the approval number printed on each unit and checking that number against the Florida Building Code database. If the contractor cannot produce that number in writing before ordering the windows, the quote is not compliant. Call (850) 801-5596 and we’ll show you exactly what the paperwork looks like.
Yes. Many original Ocean Ridge homes built before central air was standard used jalousie windows for passive ventilation, and they are the most common replacement item we see on interior-street houses from the 1950s, 1960s, and 1970s. They are replaced with impact-rated casements, single-hungs, or horizontal rollers that meet current wind-load standards, and the openings are re-flashed and often rebuilt to square before the new units go in. A jalousie window has no path to code compliance and no realistic repair option, so the honest recommendation is full replacement.
Documented impact-rated window compliance can meaningfully reduce your windstorm premium or, in some cases, be the condition that keeps a policy from being non-renewed. Insurers in Palm Beach County want proof, not promises; the numbered Miami-Dade NOA or Florida Product Approval documentation matters, and so does the permit and final inspection record. We register both warranty layers and leave you with the paperwork your insurer will ask for before you renew. That documentation has saved Ocean Ridge customers from real premium increases, and we’re glad to show you how we prepare it.
Sometimes, but only if the existing frame is structurally sound, square, and properly flashed. In many 1950s and 1960s CBS homes here, the original frames were set without flashing and have been wicking moisture into the block for decades, and in those openings an insert would simply seal the problem in. We’ll inspect the opening before quoting, and we’ll tell you directly if a full frame replacement is the only responsible choice. The answer affects cost and code compliance, and we’d rather give you the truthful answer than a cheap one.
Insist on stainless steel hinges, locks, and operators, and on frame finishes rated for severe marine environments. Ocean Ridge’s dual salt-air exposure from the Atlantic and the Intracoastal corrodes zinc or standard steel hardware within a few years, causing jammed sashes and failed locks long before the glass shows any problem. At TruePane, we spec marine-grade hardware as the baseline on every Ocean Ridge job, not as an upsell. It’s the difference between a window that works for thirty years and one you’re fighting with by year five.
Your Window Replacement in Ocean Ridge
You want the work done right once, by people who will still answer the phone in ten years if something goes wrong. That’s how TruePane operates. Call (850) 801-5596 for a free, written estimate, or to ask any question about wind-load ratings, marine-grade hardware, permits, or lead times on the brands we carry. A live person answers, 24 hours a day, 7 days a week. No voicemail trees, no call centers. We serve Ocean Ridge directly, and we’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.