Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Palm Beach
Palm Beach Window Replacement comes with a set of rules no other town in the county enforces. If you’re replacing a window on the island, the unit has to carry Florida Product Approval for impact-rated glazing, and the opening also has to pass design review with the town’s Architectural Commission or Landmarks Preservation Commission. That dual requirement shapes every part of the job, from the glass package to the frame profile to how long the permit takes. TruePane Windows & Doors handles both sides of it on every install. Call (850) 801-5596 and we’ll walk you through what your specific house actually needs.
We’ve been setting windows and doors across South Florida since 2008, and we’re the crew Palm Beach homeowners call when the quote that looked cheap turns out to have left the compliance work off the page. Our team works on Mizner-era estates along South Ocean Boulevard, post-war ranches near the Intracoastal, and contemporary oceanfront builds where the glass is doing structural work. We know which openings ARCOM will flag before the inspector ever shows up.
Window Installation in Palm Beach: What the Code Actually Requires
Palm Beach sits inside the High Velocity Hurricane Zone, the stricter of Florida’s two wind-load regions. That means every replacement window or door in a residential structure has to meet HVHZ impact standards, which is why Impact Windows & Doors - Palm Beach must be tested as a complete unit with frame, glass, and hardware together. It is not enough for the glass alone to be impact-rated. The whole assembly has to carry a Florida Product Approval number that matches the size and configuration of your opening.
Here’s the part that separates Palm Beach from West Palm Beach, North Palm Beach, or Greenacres: the town’s Architectural Commission, known locally as ARCOM, and the Landmarks Preservation Commission have to sign off on the look of the unit, not just the engineering. On much of the island, that review applies whether your house is individually landmarked or not. Palma Vista, the Estate Section around South Ocean Boulevard, Phipps Plaza, and the streets running north toward the Sailfish Club all fall under design oversight that dates back decades. A catalog impact window with a fat vinyl frame and a mullion pattern that looks like a 1990s condominium will get rejected. It adds four to eight weeks to the process and a lot of money to the bill when it happens, because the unit has to be re-fabricated.
A compliant quote for window installation in Palm Beach includes the Florida Product Approval number for each unit, a line item for ARCOM submittal drawings, the permit fee, and the inspection. A cheap quote leaves the design review off entirely, and the homeowner finds out when the town tags the project.
Why TruePane Windows & Doors Is Palm Beach’s Preferred Window Installation Company
We are not the lowest bid in Palm Beach. We’re the company that shows up with a quote that the town accepts the first time. Dale Kessler founded TruePane in 2008 on a rule that still governs every job: if the pane is not true, the job is not done. Forty-two years in the glass trade taught him that out-of-true installs and voided warranties were problems that could be fixed permanently, and that is what we do.
Our Palm Beach customers tend to be people who have lived in their houses for twenty years or more. They remember the contractor who left a fogged seal and a door that binds in July. They don’t want the cheapest bid. They want the work done right, and they want a company that will still answer the phone if something goes wrong. A live person answers our phones 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form. A person.
We also put our promises in writing. The Keystone Standard means both manufacturer warranty layers get registered in writing before the truck leaves the driveway, with the durations stated, not implied. Our Done Right Promise covers the workmanship on every install. If it is not done right, we make it right, with no paperwork fights and no arguing. Those are the terms Palm Beach homeowners ask about first, and we’re glad to put them on paper.
Our Window Installation Services in Palm Beach
Casement Windows
Casement windows are the most common replacement we see on Palm Beach’s Mizner-era and Mediterranean Revival homes, because the original 1920s units were often steel casements set into arched stone surrounds. The replacement has to match the original sightlines closely enough to pass ARCOM review, which usually means a custom-fabricated frame rather than a catalog unit. We template every rough opening, even when it looks square, because on the island it rarely is after ninety years of settling. A typical casement window installation in Palm Beach runs $1,100 to $2,600 per unit depending on size and finish.

Fixed & Picture Windows
Oceanfront and Intracoastal-facing homes in Palm Beach lean hard on fixed and picture windows, because the whole point is the view. These are the largest lites on the house, and they carry the biggest wind loads. For openings over 40 square feet, the glazing package has to be engineered to the specific elevation and exposure of your house, not just pulled from a general spec sheet. On South Ocean Boulevard, that means laminated impact glass thick enough to take a category-five gust without deflecting enough to pop the seal. Fixed and picture window installation in Palm Beach typically runs $900 to $3,400 per opening, and the price moves with the glass thickness and the frame finish.

Awning Windows
Awning windows appear all over Palm Beach’s post-war homes near the Intracoastal, and they’re also common on the island’s smaller guest houses and pool pavilions. They hinge at the top and open outward, which works well in the salt air as long as the hardware is marine-grade. We see a lot of awning windows with corroded friction hinges and failed weatherstripping within five or six seasons because the original installers used standard off-island components. We don’t. Every awning window we install in Palm Beach gets stainless or marine-grade hardware and a sill pan flashed to shed water properly. Expect $950 to $2,200 per unit.

Single & Double Hung
Single and double hung windows are less common on the landmarked estates but they appear throughout Palm Beach’s mid-century and newer construction. The challenge here is thermal performance, which is why Energy-Efficient Windows - Palm Beach homes need proper balance hardware in the coastal environment. We spec double-hung units with tilt-in sashes for cleaning, which matters when the constant salt haze leaves a film on the glass every few weeks. Single and double hung window installation in Palm Beach runs $850 to $2,100 per opening, including the balance system and full perimeter sealing.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Beach
TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows, and we provide Viewlux service in Palm Beach as well. For Palm Beach specifically, we quote a lot of PGT and CGI impact products, because those Florida manufacturers build to HVHZ standards as a baseline rather than an upgrade. We also work with Ply Gem, CWS, and other lines when the design review calls for a specific frame profile or color. We provide side-by-side quotes on paper so you see exactly what you’re buying, including which warranty layers apply and for how long. Our relationship with the manufacturers also means we can move faster on custom fabrication for Palm Beach’s non-standard openings.
This page is part of our broader Window Installation service line. If you’re reading from elsewhere on the island, you can also see our Palm Beach coverage page for the full scope of work we do here.
Common Window Installation Problems We See in Palm Beach Homes
- Non-compliant impact glazing from a previous cheap quote. The window has impact glass, but the Florida Product Approval number doesn’t match the installed size, or the frame was never tested as a unit. The permit history shows the problem, and when the next storm comes, the homeowner’s wind mitigation credit evaporates. We document compliance on every opening we touch.
- Salt-air corrosion eating standard hardware. Palm Beach is a barrier island less than half a mile wide between the Atlantic and the Intracoastal. Every opening gets salt exposure from two directions, not one. Untreated aluminum frames and off-the-shelf hinges bind, pit, and fail within a few seasons. We use marine-grade hardware and corrosion-resistant finishes as standard on the island.
- Arched stone surrounds that have shifted. On the Mizner-era estates, the original 1920s arched surrounds have often moved enough that an off-the-shelf impact unit will never seat correctly. On South Ocean Boulevard, our crew pulled a Mizner-era casement window from a 1920s Mediterranean Revival estate, and the original arched stone surround had shifted just enough that a catalog impact unit would never seat. We templated the rough opening, custom-fabricated a fusion-welded frame with low-E impact-rated glazing to match the arch exactly, and ran flashing tape up the jambs before the ARCOM inspector ever set foot on site.
- Seal failure from thermal cycling in full sun. Palm Beach’s east-facing elevations take direct morning sun and salt haze. Standard dual-pane seals break down faster here than inland, especially on dark-framed units that hit high surface temperatures. We spec glazing packages and edge seals that are built for the coastal Florida sun, not for a generic temperate climate.
Pricing for Window Installation in Palm Beach, FL
Window installation in Palm Beach runs higher than the county average for three reasons: HVHZ impact glazing is mandatory, custom fabrication is common on the island’s older homes, and ARCOM or Landmarks review adds design and submittal cost to nearly every project. A full casement replacement in the Estate Section typically lands between $1,100 and $2,600 per unit. Fixed and picture windows run $900 to $3,400 depending on glass thickness and opening size. Awning windows run $950 to $2,200, and single or double hungs run $850 to $2,100. A whole-house window installation in Palm Beach for a 3,000-square-foot home generally falls between $28,000 and $75,000, with the spread driven by the glazing package, the frame material, and how many openings need custom fabrication. Get a firm, written quote with every line item itemized before you sign. Call (850) 801-5596 for a free estimate. We’ll measure every opening twice and give you the numbers on paper.
We Also Serve Cities Near Palm Beach
Our crews work throughout Palm Beach and the surrounding coastal communities. That includes Window Installation in Palm Beach, West Palm Beach, North Palm Beach, and Greenacres. If your house sits just off the island or across the bridge, the code requirements change, and we adjust the quote accordingly. You should not pay for Palm Beach compliance work if you don’t live in Palm Beach. Call (850) 801-5596 and we’ll tell you exactly what your municipality requires.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Palm Beach
Every replacement window or door in Palm Beach must meet the High Velocity Hurricane Zone standards set out in the Florida Building Code, which means the complete assembly, frame and glass together, carries a Florida Product Approval number that matches the size, shape, and elevation of the opening. Your quote should list that number for each unit. A compliant quote also includes a line item for the permit, the ARCOM or Landmarks submittal if your opening falls under design review, and the inspection. If those line items are not on the page, the quote is not compliant. Call (850) 801-5596 for an exact quote, estimates are free.
In most of Palm Beach, yes. The town’s design review applies to a broad swath of the island, not just individually landmarked properties. If your opening faces a public street or is visible from one, ARCOM typically has jurisdiction. The Landmarks Preservation Commission handles the designated historic districts and individually landmarked properties. We check the review status of every opening before we quote. It keeps you from paying for a catalog window that gets rejected and re-fabricated. Call (850) 801-5596 to have us check your address.
We template the rough opening and custom-fabricate the frame to match the existing arch exactly. That’s what we did on a Mizner-era casement off South Ocean Boulevard, where the stone surround had shifted enough that an off-the-shelf unit would never seat. The frame gets welded, the impact glazing is cut to the template, and the flashing is run before the inspector arrives. That process takes longer than a standard swap, but it results in an opening that is sealed, compliant, and visually consistent with the house. Call (850) 801-5596 and we’ll walk you through the timeline.
Documented compliance is the only thing that protects your wind mitigation credit. If your window replacement does not have a Florida Product Approval number that matches the installed unit, or the permit history does not show the inspection, your insurer can reduce or deny the credit after a claim. We register both manufacturer warranty layers in writing and make sure the permit closes with the inspection on record. That paper trail matters when the wind blows. Call (850) 801-5596 for a free estimate and we’ll explain the documentation you should keep.
Because the frame, hardware, and weatherstripping were never built for a barrier island. Impact glass does not prevent salt-air corrosion, frame pitting, seal failure from thermal cycling, or binding hardware from marine exposure. Palm Beach sits between the Atlantic and the Intracoastal, so every opening gets salt from both sides. We use marine-grade hardware, corrosion-resistant finishes, and edge seals built for coastal Florida. Those are not upgrades on our quotes, they are the standard. Call (850) 801-5596 for an exact quote, estimates are free.
Contact TruePane Windows & Doors for Window Installation in Palm Beach
If you’re planning a window installation in Palm Beach, start with a company that understands the town’s rules before the first window comes out of the opening. We’ll come out, measure every opening, check the ARCOM and Landmarks status of your house, and give you a written quote with every line item spelled out. Free estimates, no surprises on the bill. Call (850) 801-5596 to schedule yours.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach with years of glazing craft and a commitment to doing every job square.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After