Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFull Frame Replacement in Palm Beach, FL
Full frame replacement is the process of removing the entire existing window unit-sash, frame, and casing-down to the rough opening, allowing us to install a completely new system. In Palm Beach, this is often the necessary path when the original wood frames have succumbed to our coastal humidity, wood rot, or termite damage, or when you are switching from an older aluminum frame to modern, impact-resistant materials. Unlike a pocket installation, which simply fits a new window into an existing frame, a full frame replacement gives us a clean slate to inspect the wall opening, insulate properly, and ensure the new window is perfectly square. If you are noticing soft spots around your window frames or drafts that persist even when the sashes are locked, call (850) 801-5596 to have us take a look.
We approach full frame replacement as a craft commitment, not just a product sale. When we perform this service, we remove the old window system entirely, which gives us the opportunity to check the structural integrity of your home’s rough opening before the new unit is set. This is a critical step for homes in Palm Beach, where salt air and high humidity can hide decay behind the exterior stucco or siding. Our team at TruePane Windows & Doors follows The Keystone Standard, meaning we register both manufacturer warranty layers in writing before our truck leaves your driveway. Whether you are looking at a Window Replacement in Palm Beach or a specific full frame job, we ensure the installation is done right the first time because if the pane is not true, the job is not done.
When You Need Full Frame Replacement
Not every window issue requires a full frame tear-out. Often, Insert Window Replacement or a pocket replacement is sufficient. However, there are specific situations where leaving the old frame in place is a mistake that will cost you more in the long run. We recommend a full frame replacement when the following conditions are present in your home:
- Structural Wood Rot: If the wood surrounding your window frame is soft, crumbly, or discolored, the rot has likely compromised the framing members hidden inside the wall. Patching over this with a new window frame will only trap moisture and allow the decay to continue, potentially damaging the surrounding wall studs.
- Significant Frame Distortion: Over decades, settling foundations or extreme heat exposure can cause window frames to twist or bow. A pocket installation requires a square, plumb frame; if the old one is warped, the new window will never operate properly or seal against the elements.
- Switching Material Types: If you are moving from older, narrow-profile aluminum windows to modern, thicker energy-efficient vinyl or impact-resistant frames, a full frame replacement is usually required to accommodate the differences in depth and mounting requirements.
- Hidden Water Intrusion: If you see staining on the drywall or trim around your windows, there is a good chance water is bypassing the flashing. Removing the frame allows us to inspect the rough opening, replace damaged shims, and install a proper flashing system to prevent future leaks.
- Maximizing Glass Area: Sometimes, older windows have bulky frames that significantly reduce the amount of light entering a room. By removing the old frame down to the studs, we can sometimes install a slightly larger window unit, maximizing your view of the Florida landscape.
If you aren’t sure which path your home needs, call (850) 801-5596. We don’t push for the more expensive service if it isn’t necessary, but we also won’t cut corners if the structure underneath is failing.
Our Full Frame Replacement Process
We treat every full frame replacement with the same attention to detail that Dale Kessler established when he founded TruePane Windows & Doors in 2008. We are second-generation glaziers, and we know that the quality of the install is just as important as the quality of the window itself. Our process is designed to protect your home and ensure long-term performance:
- Precise Measurement and Assessment: Our uniformed, background-checked technicians arrive to measure every opening twice. We inspect the condition of the surrounding stucco or siding to determine exactly how much material needs to be removed to expose the rough opening.
- Removal of the Existing System: We carefully remove the old window, sash, and frame. This is the stage where we inspect the structural wood studs and the sill for any hidden water damage or insect activity that wasn’t visible before.
- Rough Opening Preparation: Once the old frame is out, we clean the opening and install new flashing and moisture barriers. This is a critical step in Palm Beach, where heavy rainfall and humidity can quickly turn a small leak into a major repair.
- Installation and Leveling: We set the new window frame into the opening, using shims to ensure it is perfectly level, plumb, and square. We verify the operation of the sashes before we fasten the frame permanently to the studs.
- Insulation and Sealing: We fill the gap between the new frame and the rough opening with high-quality expanding foam or fiberglass insulation. We then seal the exterior with premium caulk that is designed to withstand the Florida sun and salt air.
- Finishing Touches and Warranty Registration: We reinstall the interior trim and exterior flashing, leaving the area clean. We then register both the manufacturer’s warranty and our workmanship warranty before we leave, ensuring you have the documentation in hand.
Every step of this process is governed by our Done Right Promise. If you find an issue after we leave, we make it right-no paperwork, no arguing, and no fine print.
Full Frame Replacement Pricing in Palm Beach
Full frame replacement is a labor-intensive process compared to our Window Replacement services, as it involves removing exterior trim, siding, or stucco and potentially repairing the framing underneath. In the Palm Beach market, you can generally expect a higher investment for this level of work because of the time required to properly waterproof the opening. While we provide custom quotes for every home, the following table offers a realistic range of what homeowners in our area typically see for high-quality, impact-rated window installations.
| Window Type | Estimated Cost Per Opening (Installed) |
|---|---|
| Standard Single-Hung (Impact) | $1,200 - $1,800 |
| Horizontal Slider (Impact) | $1,300 - $1,950 |
| Casement Window (Impact) | $1,500 - $2,200 |
| Picture Window (Large Fixed) | $1,400 - $2,500 |
These figures are estimates and can vary based on the specific manufacturer line-such as CWS, ES Windows, or ViewLux-as well as the size of the opening and the complexity of the exterior finish. We provide side-by-side quotes on paper for the brands we carry, so you can see exactly what you are paying for without hidden line items. To get an exact quote for your specific project, call (850) 801-5596 to schedule a consultation. We offer free estimates, and we honor a permanent 5% discount for seniors and veterans.
FAQs - Full Frame Replacement
How do I know if I need a full frame replacement or just an insert?
You typically need a full frame replacement if the current window frame is rotting, warped, or if you are switching window materials entirely. If your existing frame is structurally sound, square, and free of rot, an insert installation or Storm Window Replacement is often sufficient. We will inspect your openings during our visit and tell you exactly what is required-if a simple repair is all you need, we will tell you, because we believe in a square deal.
Do you offer warranties on full frame installations?
Yes, we adhere to The Keystone Standard, which means we register both manufacturer warranty layers in writing before our truck leaves your driveway. Additionally, every job is backed by our Done Right Promise, which guarantees our workmanship for 90 days. If it isn’t done right, we make it right, with no arguments or paperwork fights. Call (850) 801-5596 if you have questions about specific brand warranties.
How long does a full frame replacement take?
Most full frame replacements are completed in a single visit, though the exact timeframe depends on the number of windows and the condition of the rough openings we discover once the old frames are removed. We schedule our work to respect your time, and our uniformed technicians arrive prepared to finish the job correctly, not just quickly. If you have a larger project, we will provide a clear timeline during the quoting process so you know exactly when we will be there.
Is it cheaper to repair a frame or replace the whole window?
It is almost always cheaper to repair a small area of rot than to replace a window, but if the rot is extensive, repairing the frame can sometimes cost nearly as much as a new installation without providing the energy efficiency or impact benefits of a new unit. We evaluate the long-term viability of your windows; if a repair will only last a year or two, we will advise you that replacement is the more sound financial choice. Call (850) 801-5596 for an honest assessment of your situation.
Full frame replacement is a significant investment in your home, and we treat it with the seriousness it deserves. Whether you are dealing with storm damage, aging frames, or just want to improve the efficiency of your home with Historic Window Restoration, our team is ready to help. We are proud to serve local communities since 2008, and we plan to be here for many more, which is why we answer the phone 24 hours a day, 7 days a week. If you are ready to get started with a contractor who values craft over quotas, call (850) 801-5596 for a free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.