Sliding Glass & Patio Doors

Sliding Glass & Patio Doors in Palm Beach, FL | TruePane Windows & Doors

Sliding glass and patio doors are how Florida homes connect indoor living to the outdoors, and in Palm Beach, they also have to stand up to wind-driven rain and flying debris. TruePane Windows & Doors installs impact-rated sliding door systems built around laminated glass on a reinforced track, engineered to match the same wind-zone design pressure as our window lines. Homeowners across Palm Beach, from El Cid to Ibis Golf & Country Club, call us when a dated slider needs to come out and a code-compliant, smooth-operating impact door system needs to go in. Call (850) 801-5596 to schedule a free on-site measurement.

Call (850) 801-5596

Product Overview - Sliding Glass & Patio Doors

Our impact sliding glass and patio doors are large-span systems designed for the way Floridians actually live. The door is built around laminated impact glass panels that ride on a reinforced track, so a 12-foot opening doesn’t feel flimsy when a summer squall pushes through. The glass panels carry a PVB interlayer that keeps the pane in the frame under impact, and the frame is extruded aluminum or vinyl with reinforced meeting rails and interlocking stiles. It’s the same engineering philosophy we use on our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass window lines, applied to the widest openings in the house.

Architecturally, these doors suit Palm Beach ranch homes, mid-century modern builds, and the Mediterranean and coastal styles you see along Flagler Drive and in neighborhoods like Sunshine Park. They let you open a living room or primary suite to a screened lanai, a pool deck, or a garden patio. What matters most in our market is that the system is matched to the wind zone and the opening size. A door rated for a protected inland lot is not automatically suited to a barrier-island exposure, and we size the design pressure per opening rather than selling a one-spec-fits-all panel.

We carry the series through our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, which gives us room to match the right frame material, glass package, and finish to the home and the budget. Everything is installed by our own Palm Beach crew.

Technical Specifications

The table below covers the standard build options for the impact sliding door systems we install. Every quote is configured per opening, per elevation, and per wind zone.

No configuration is sold with a design pressure above +/-100. Higher ratings than your opening requires add cost without adding useful performance.

Hurricane & Compliance Performance

Laminated Impact Glass. Each lite uses a PVB interlayer that holds the glass in the frame under impact. If debris strikes the panel, the interlayer keeps the pane from shattering into the living space and keeps the opening sealed against wind-driven rain.

Miami-Dade NOA / Florida Product Approval. The door systems we install carry NOA and Florida Product Approval numbers issued per configuration. We verify the specific approval on your quote so the paperwork matches the permit submittal for your Palm Beach project.

FBC / HVHZ Compliance. The systems are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the stricter compliance tier Florida applies to the coastal counties, including Palm Beach County and the Town of Palm Beach.

TAS 201 / 202 / 203 Testing Context. HVHZ-rated products in this category are tested under TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. It’s the protocol family that proves the door holds under repeated wind cycles, not just a single hit.

Design Pressure Matched to Your Wind Zone. We match design pressure to the actual wind zone of the home, up to +/-100, never higher. Coastal Palm Beach exposures typically require more than a western suburbs lot, and we configure per opening rather than overselling a generic rating.

Energy Performance. Low-E and insulated glass options are available for homes where afternoon sun loads on a west-facing patio door. In Palm Beach, low-E glass on a large slider makes a noticeable difference on rooms that catch the 3 p.m. heat.

Color & Glass Options

White and almond finishes are the most common on Palm Beach homes with a traditional or coastal palette, especially where window trim is painted white or the exterior is a light stucco. Bronze and black frames read as modern and work well on contemporary builds or homes with darker window lines. Tan splits the difference and suits many Mediterranean-style facades where pure white feels too stark.

For glass, clear laminated impact glass preserves the truest view and is the standard starting point. Tinted glass cuts glare and heat gain on east- and west-facing doors. Low-E insulated glass adds energy performance for air-conditioned spaces that face open sun. We’ll walk through the options with you at the measure appointment, because the right glass for a garden-facing door on the north side of a Palm Beach home is often different from what you’d pick for a pool-facing slider.

Installation by TruePane Windows & Doors in Palm Beach

How a sliding glass door is installed matters as much as the door itself. An impact sliding door is only as stable as the rough opening it sits in, and an improperly sealed frame will leak regardless of the NOA rating on the glass. TruePane Windows & Doors installs in Palm Beach with a process tied to AAMA 2400/2410 installation practice, including AAMA 812 low-expansion foam perimeter sealant around the frame.

The job starts with a pre-install inspection. We check the rough opening for rot, termite damage, bowed studs, and out-of-level sills before any new frame goes in. If there’s a problem in the opening, we fix it before the door is set. The door then goes in level, plumb, and square, with the sill shimmed to drain properly toward the outside. The perimeter is sealed with low-expansion foam, flashed at the head, and silicone sealed at the sill and jambs. For second-floor doors and balconies, we take extra care with the pan flashing because that’s where Palm Beach coastal homes show leaks first.

After the frame is set and the panels are hung, we run a water test on the perimeter, adjust the rollers so the door moves smoothly with one hand, and set the interlock so the meeting stiles seat tightly. We also handle the permitting side for HVHZ jurisdictions. Palm Beach County and the Town of Palm Beach require product approval submittals with the permit, and we provide the configuration-specific NOA or Florida Product Approval numbers as part of the quote. The last thing you want is a door that’s engineered for HVHZ but installed like a standard inland slider. That compromises the very rating you paid for.

Frequently Asked Questions - Sliding Glass & Patio Doors

What wind zone / design pressure is the Sliding Glass & Patio Doors rated for?

The design pressure is matched to your wind zone, up to +/-100, never higher. In Palm Beach County, coastal and barrier-island locations fall into stricter wind-zones than inland lots, so the required rating depends on the home’s position, exposure, and opening size. Call (850) 801-5596 and we’ll confirm the right rating for your elevation.

What is the lead time?

Lead time varies by line and configuration, but most impact sliding door systems from our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass catalogs land in a few weeks from approved shop drawings. Custom sizes and specific finishes add time. We’ll give you a production window when we quote the job, and we don’t start removing the old door until the new one is in our Palm Beach shop.

Does it require a Miami-Dade NOA or Florida Product Approval submittal for my permit?

Yes. In Palm Beach County and the Town of Palm Beach, your permit submittal typically includes the product approval for the exact configuration you’re installing. TruePane Windows & Doors provides the NOA or Florida Product Approval number on your quote and we include the supporting documents with the permit package, so you’re not chasing paperwork from the manufacturer. Call (850) 801-5596 for a quote that includes the approval documentation for your opening.

Can I customize the size or configuration?

Yes, within the product line’s tested parameters. We can configure 2-track or 3-track layouts, mix fixed and operating panels, and size the door up to 12 feet wide. The design pressure must be verified for your exact size and configuration; some panel configurations have lower ratings than others. We’ll confirm your size against the approval before quoting, so the door you want is the door that passes the permit review.

How do I maintain the frame?

Keep the track clear of sand, leaves, and debris with a vacuum or dry brush, and clean the track weep holes with a soft wire or pipe cleaner so water continues to drain outward. Wash the frame and glass with mild soap and water twice a year, especially if the home is close to the ocean. Avoid pressure washing the frame, and don’t lubricate the rollers with oil-based products; if the door drags, the rollers likely need adjustment or replacement. Call (850) 801-5596 and we’ll take a look.

Get a Quote - Sliding Glass & Patio Doors in Palm Beach

Whether you’re replacing a fogged slider in Lake Worth Beach or planning a new build on Palm Beach Island, we’ll spec the right impact sliding door for your wind zone and opening. Call (850) 801-5596 to schedule a free on-site measurement, and we’ll configure the size, finish, glass, and design pressure with a written line-item quote.

Written by the team at TruePane Windows & Doors, serving Palm Beach, FL with impact window and door installation across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass product lines.