Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterImpact Garage Doors in Palm Beach, FL | TruePane Windows & Doors
Your garage door is the largest single opening in your home, and in Palm Beach, FL, it’s also the one most likely to fail under hurricane wind pressure. Impact Garage Doors close that vulnerability. These are hurricane-code-approved, energy-efficient garage door systems engineered to meet the same wind-zone standard as the rest of your impact package, so your entire envelope works as one system instead of leaving a weak point at the garage. TruePane Windows & Doors installs them factory-trained and HVHZ-compliant. Call (850) 801-5596 to schedule a free on-site measurement in Palm Beach.
Product Overview - Impact Garage Doors
Impact Garage Doors are built for one job: keeping your garage opening sealed when a storm tries to blow it in. In Palm Beach, where wind-driven debris and pressure differentials are a real threat every hurricane season, a standard garage door is often the first thing to go. Once it fails, the wind gets inside and can lift the roof from within. This product is designed to stop that chain reaction before it starts.
The standard configuration is an insulated steel panel door. It’s heavy, rigid, and reinforced, not a lightweight stamped door dressed up to look substantial. The engineering focus is on the load path: how wind pressure travels from the panel face through the hinges, into the track, and finally into the jambs and header. Every component in that path is sized for the load, which is what separates a rated assembly from a collection of parts.
Architecturally, these doors fit the clean, low-profile look you see on newer Palm Beach construction and many renovated mid-century homes. They read as intentional rather than industrial. For homeowners who want daylight in the garage without giving up the rating, optional glass panel inserts are available. For everyone else, the insulated steel panel is the quiet, energy-efficient workhorse.
TruePane Windows & Doors is a factory-trained installer for this product line. That matters because the NOA rating applies to the system as tested and installed, not just the door sitting in a crate. A door that’s out of square or anchored incorrectly won’t perform to its design pressure. We install it the way the rating assumes it will be installed.
Technical Specifications
Here’s what you’re actually buying when you select an Impact Garage Door from TruePane Windows & Doors in Palm Beach:
- Panel construction: Insulated steel panel, non-glazed, built for rigidity and thermal performance
- Glazing options: Optional glass panel inserts for natural light; standard configuration is solid insulated steel
- Finish options: White, Almond, Sandtone, and Black - factory-applied, not site-painted
- Design pressure: Matched to your Palm Beach wind zone, up to +/-100 psf - never higher than your zone requires
- Track and hardware: Heavy-gauge vertical and horizontal track sized to the door weight and pressure rating
- Seal system: Perimeter weatherstripping with AAMA 812 low-expansion foam sealant at installation
- Size range: Custom-configured per opening; standard single and double garage widths available, plus custom sizing
These specs are the bones of the product. The compliance layer below is what makes them legal and insurable in Palm Beach County.
Hurricane & Compliance Performance
Laminated Impact Glass - On configurations with glass panel inserts, the glass is laminated with a PVB (polyvinyl butyral) interlayer. Under impact, the glass may crack but it holds in the frame. The interlayer is what keeps wind and debris from entering the garage. This is the same lamination principle used in impact windows, applied to the garage door plane.
Miami-Dade NOA / Florida Product Approval - The product carries Miami-Dade Notice of Acceptance and Florida Product Approval numbers, issued per configuration. That means each size, panel type, and glass option has its own approval. When we quote your door, we’ll confirm the exact approval number for your specific configuration so your permit application is clean.
FBC / HVHZ Compliance - The door is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the stricter standard that applies to Palm Beach County and Miami-Dade. It’s not optional here, and this product is built for it.
TAS 201 / 202 / 203 Testing Context - HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. These tests simulate the repeated pressure cycles of a real hurricane, not a single gust in a lab.
Design Pressure Matched to Your Wind Zone - Design pressures are matched to your specific wind zone, up to +/-100 psf - never higher. That last part matters. You don’t pay for a rating you don’t need, and you don’t get under-rated for a coastal exposure that demands more. We verify the wind zone for your exact Palm Beach address before we order.
Energy Performance - The insulated steel panel provides a thermal break that a thin uninsulated door doesn’t. On configurations with glass, Low-E and insulated glass options are available. For Palm Beach garages that are air-conditioned or used as workshops, this keeps the space livable and reduces the load on your cooling system.
Color & Glass Options
Palm Beach architecture leans on a specific palette, and these four finishes cover it well. White is the classic choice for coastal and Key West-style homes, clean against pastel exteriors. Almond and Sandtone are warmer neutrals that sit naturally with Mediterranean and Spanish Revival stucco work you see throughout West Palm Beach and the barrier island. Black is the modern punctuation mark on contemporary builds and renovated ranch homes that want a crisp contrast against light walls.
On glass, the standard insulated steel panel is the right call for most garages: maximum rigidity, no visibility into the space, and the best thermal performance. The optional glass panel inserts change the character of the door entirely, adding natural light and a more architectural feel. They’re popular on higher-end homes where the garage faces the street or a courtyard. Low-E and insulated glass options are available on glazed configurations, which means you can have the look without turning your garage into a solar oven in August.
Installation by TruePane Windows & Doors in Palm Beach
A NOA-rated door installed by someone who doesn’t understand the system is just an expensive door. The rating assumes a specific installation practice, and we follow it on every job in Palm Beach. Our process starts with a pre-install inspection of the opening: we measure the jambs, check the header, and verify that the structure can actually carry the loads the door will transfer into it. If the opening needs reinforcement, we say so before we order the door, not after we’ve started hanging it.
On install day, we set the door level, plumb, and square. That’s not a slogan; it’s the difference between a door that glides and one that binds, and it’s the difference between a pressure-rated assembly and one that leaks at the corners. We foam and seal the perimeter with AAMA 812 low-expansion sealant, following AAMA 2400/2410 installation practice. Low-expansion foam matters because high-expansion foam can warp the frame and compromise the seal. We finish with a water test and a full cleanup.
Palm Beach adds its own considerations. Coastal exposure means higher wind zones on the barrier island and in exposed areas of West Palm Beach. Permitting in Palm Beach County HVHZ jurisdictions requires the NOA or Florida Product Approval submittal to match the exact configuration on your opening. We know what the building department wants to see, and we provide the documentation. If you’re in a coastal exposure category, we’ll verify the design pressure requirement for your specific address before we order anything.
Improper installation compromises the NOA-rated system. Bolting a rated door into an unrated opening, or setting it out of square, or skipping the perimeter seal - any of these voids the performance you paid for. This is why professional installation by a factory-trained team matters more than the door brand itself.
Frequently Asked Questions - Impact Garage Doors
Design pressures are matched to your specific Palm Beach wind zone, up to +/-100 psf, never higher. Your rating depends on your exact address and exposure category. The design pressure is confirmed during the free on-site measurement. Call (850) 801-5596 and we’ll verify the requirement for your home.
Lead times vary by configuration, size, and finish. Standard insulated steel panel doors in stock colors typically move faster than custom sizes with glass panel inserts. We’ll give you a written lead-time estimate when we provide your quote. If your project is permit-driven, we’ll also flag how long the approval submittal typically takes in Palm Beach County. Call (850) 801-5596 and we’ll put a timeline on your specific door.
Yes. In Palm Beach County HVHZ jurisdictions, your permit package needs the approval number that matches your specific door configuration: size, panel type, glass option, and hardware. We provide the exact approval documentation for the door we’re quoting. No generic approval number. The submittal matches what’s on the truck. Call (850) 801-5596 and we’ll walk you through what your municipality asks for.
Yes. Standard single and double garage widths are available, and custom sizing is possible within the tested configurations. Glass panel inserts, finish color, and track hardware are all selectable. What you can’t do is order a size outside the NOA-tested envelope for that configuration. We’ll tell you exactly where the line is for your opening. Call (850) 801-5596 for a free measurement and a firm answer.
Salt air is hard on hardware, and Palm Beach garages face it year-round. Rinse the track and hardware with fresh water a few times a year, especially after storm season. Keep the track clear of debris and check that the perimeter sweep is still making contact. The factory finishes hold up well, but coastal exposure means you should watch for any scratches that expose bare metal and touch them up promptly. If the door ever feels stiff or out of balance, call us before a small problem becomes a track failure. (850) 801-5596.
Get a Quote - Impact Garage Doors in Palm Beach
If you’re researching impact garage doors in Palm Beach, you’re probably already thinking about the opening you can’t leave exposed. Let’s get you a real number. TruePane Windows & Doors offers free on-site measurements and written line-item quotes. No pressure, no vague ranges. Call (850) 801-5596 to schedule your free estimate in Palm Beach, FL.
Written by the team at TruePane Windows & Doors, factory-trained installers serving Palm Beach, FL with hurricane-impact windows and doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
