Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAwning Windows in Palm Beach, FL | TruePane Windows & Doors
Awning windows are the workhorse of Florida ventilation. They hinge at the top and crank outward from the bottom, so you can leave them open during a summer downpour and the sash acts like a small roof, shedding water away from the opening. For Palm Beach homeowners, that single feature changes how a house breathes. We install impact-rated awning windows from PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, set into openings that are level, plumb, and square, sealed per AAMA 812 and installed to AAMA 2400/2410 practice. If you are pricing a window replacement or a new build, call TruePane Windows & Doors at (850) 801-5596 and we will walk the project with you.
Product Overview - Awning Windows
Top-hinged, crank-out impact windows built around a simple idea: you should not have to choose between security and fresh air. In coastal Palm Beach, that matters more than in most places. Afternoon thunderstorms roll through on a nearly daily schedule from June through September. A window that can stay cracked open while rain comes down sideways is not a novelty here, it is practical building science.
The frame is engineered from aluminum or vinyl, both suited to salt air and high humidity when properly coated and maintained. The operating hardware is a smooth crank mechanism that opens the sash outward and holds it at the angle you set. When closed, the sash compresses against weatherstripping in the frame, and the laminated impact glass carries the structural load.
Architecturally, awning windows work well in places where a horizontal opening makes sense: above kitchen sinks, below fixed picture windows, in bathrooms where privacy and venting matter, along hallway walls, or grouped together in pairs and triples to create a wide band of light and air movement. Their proportions lean wide rather than tall, which gives them a quiet presence on a Florida elevation. We see them regularly in Palm Beach mid-century ranches, coastal contemporary builds, and Mediterranean-style stucco homes where deep-set openings help shade the glass.
Every awning window we sell and install in Palm Beach is built with laminated impact glass in a weathertight frame. The glass is the barrier. The frame is the system that keeps the barrier in place. Both have to be right.
Technical Specifications
- Frame materials: Aluminum or vinyl. Aluminum delivers a narrower sightline and a more architectural profile; vinyl brings a softer look and strong thermal performance.
- Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, and clear glass. Glass packages are selected per opening, per exposure, and per Palm Beach building department submittal requirements.
- Finish options: White, almond, bronze, black, and tan. Powder-coated or factory-applied finishes matched across the TruePane product lines we install.
- Screen options: Fixed screen or retractable screen. Fixed screens stay in place on the interior; retractable screens roll out of sight when you want a clean view from inside.
- Operation: Crank-out from the bottom, with multi-point locking hardware on qualifying configurations.
- Design pressure: Matched to your wind zone, up to +/-100, never higher. We do not overstate a DP rating and we do not sell a rating the opening does not need.
Hurricane & Compliance Performance
Laminated Impact Glass - The glass is two panes bonded with a PVB interlayer. When something hits it, the glass may crack but the interlayer holds the pieces in the frame. The window keeps its barrier. Water, wind, and debris stay outside, and the structure does not pressurize.
Miami-Dade NOA / Florida Product Approval - Every configuration we quote carries the applicable Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers. These are issued per configuration, not per product line, so we verify the specific numbers on your quote before you sign.
FBC / HVHZ Compliance - Engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Palm Beach falls under HVHZ jurisdiction, which means the window is not just coastal-rated, it is rated for the wind-driven rain and debris environment we actually live in.
TAS 201 / TAS 202 / TAS 203 Testing Context - HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These are the tests that matter in Palm Beach, and the products we install are built to answer them.
Design Pressure for Your Wind Zone - Design pressures are matched to your wind zone, up to +/-100, never higher. What that means in practice: a window near the coast or on an exposed elevation gets the DP rating that engineering calls for, and we do not pad the number. The rating come from the product approval, not from a sales sheet.
Energy Performance - Low-E and insulated glass options are available for awning window configurations. In a Palm Beach summer, the right glass package reduces heat gain through the opening and helps the home’s cooling load. We will help you weigh the glazing choices against your elevation and budget.
Color & Glass Options
Finish selections in Palm Beach tend to split along architectural lines. White and almond read clean on coastal and Key West-style homes, where lighter trim and muted palettes dominate. Bronze and black frames carry a sharper, more contemporary presence, and on a white stucco elevation they create definition at the opening. Tan sits somewhere in between, warmer than almond and less assertive than bronze, and it works well on Mediterranean elevations with clay tile or earth-tone accents.
The finish is factory applied and matched across the lines we install, so an awning window and a fixed window on the same wall carry the same color consistently.
Glass choice follows function. Clear laminated impact glass gives you the truest light and the most neutral view. Tinted glass cuts glare on western and southern exposures, which in Palm Beach means less squinting in a kitchen at five o’clock. Low-E insulated glass pairs the impact interlayer with an insulating airspace, which matters when an opening faces the afternoon sun and the room behind it is conditioned space. We will spec the glass per opening, not blanket the whole house with one package.
Installation by TruePane Windows & Doors in Palm Beach
An impact window only performs as well as its installation. A Miami-Dade NOA-rated awning window installed badly is a hole in the wall with a certificate attached. We treat the opening as carefully as the product.
Every TruePane Windows & Doors installation in Palm Beach starts with a pre-install inspection of the rough opening. We check the framing, the flashing condition, the existing sealant, and the wall’s drainage plane before the new window goes in. If the substrate is not sound, the window cannot be, and we will tell you that plainly.
The window is set level, plumb, and square. The flange or fin is sealed with AAMA 812 low-expansion foam around the perimeter, then flashed and integrated with the water-resistive barrier per AAMA 2400/2410 practice. The interior is insulated and trimmed. At finish, we run a water test where the opening allows, clean up the site, and walk you through operation and care.
Palm Beach adds a few layers to the process. Coastal exposure means salt, wind, and driving rain. HVHZ permitting means a building department will ask for the product approval numbers on your specific configuration, and we provide them on the quote so the permit package moves cleanly. It also means the inspector will be looking at the installation, not just the product. We build to the inspection. That is the standard here, and we do not work below it.
Frequently Asked Questions - Awning Windows
Design pressures are matched to your wind zone, up to +/-100, never higher. The specific DP for your Palm Beach address depends on the building’s exposure category, elevation, and the opening’s location on the house. We verify the exact configuration on your quote against the Florida Product Approval documents before you commit.
Call (850) 801-5596 and we will calculate the opening-by-opening design pressure for your project, free.
Lead times run several weeks and vary by manufacturer and configuration. Impact glass lines like PGT, CGI, and ES Windows build to order, and finish selections and custom sizes can move the schedule. We confirm the current lead time when we quote and keep you posted through production. If you are planning around a season, call early.
Yes, in Palm Beach and most HVHZ jurisdictions the building department will require the applicable NOA and Florida Product Approval numbers as part of the permit package for impact windows. We provide those numbers on your quote for the exact configuration you are purchasing. The submittal is a paperwork step, not a hurdle, but it only works when the numbers match the actual product being installed.
Call (850) 801-5596 and we will pull the approval package for your openings.
Awning windows are built in a range of standard and custom sizes. We assemble configurations per opening: a single wide unit over a sink, a pair flanking a fixed window, a triple band across a family room wall. The crank operation works on a wide range of widths and heights, though very tall or very wide openings may call for a different product. We will tell you if an awning is the wrong window for the opening. That conversation is free, and it happens before you spend money.
In Palm Beach, the routine is simple: rinse the frame and track with fresh water every few months to clear salt and sand, wipe the weatherstripping with a damp cloth, and keep the hinges and crank mechanism clean and lightly lubricated with a non-petroleum product. Coastal salt air is abrasive. The finishes on these windows are built for it, but a fresh-water rinse extends their life and keeps operation smooth. If the crank ever feels stiff, call us before forcing it.
Get a Quote - Awning Windows in Palm Beach
If you are replacing windows or planning a build in Palm Beach, let us put real product approval numbers and a real installation plan in front of you. Call TruePane Windows & Doors at (850) 801-5596 to schedule a free on-site measurement. We will spec the glass, the finish, the DP rating, and the permit-ready documentation. You will know exactly what you are buying and what it will take to install. Estimates are free, and the coffee conversation is welcome.
Written by the team at TruePane Windows & Doors, installing hurricane-impact windows and doors in Palm Beach, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
