VLX 80 Awning Window

VLX 80 Awning Window in Palm Beach, FL | TruePane Windows & Doors

The VLX 80 Awning Window is a top-hinged aluminum window that opens outward from the bottom, letting you run ventilation even during a Florida downpour. Rain hits the angled glass and runs off instead of coming inside. That alone makes it one of the most practical window styles for Palm Beach homes, where afternoon thunderstorms are a daily summer ritual. TruePane Windows & Doors is an authorized installation partner for the manufacturer behind the VLX 80. That means you get a genuine, warrantied product installed by a local Palm Beach team that does nothing but windows and doors. Call (850) 801-5596 any time to talk about your project or schedule a free measurement.

Call (850) 801-5596

Product Overview - VLX 80 Awning Window

The VLX 80 is built around a straightforward idea: a window should open for air, close for weather, and hold up for decades in a salt-air climate. Its top-hinged design means the sash swings outward from a hinge at the top, and the glass itself acts like a small awning when open. In Palm Beach, where rain comes fast and often sideways, that geometry matters. You can leave the window cracked open at night or during a storm and keep air moving without water pooling on the sill.

Architecturally, awnings fit where other operable windows don’t. You’ll see them stacked above picture windows, installed high on walls to pull hot air out, or placed over kitchen sinks and bathroom vanities where a crank-out casement would be awkward. The VLX 80 has a clean, narrow profile that sits neatly in both modern flat-roof homes near Northwood and older Spanish-Mediterranean builds in El Cid. The aluminum frame is extruded rather than rolled, which gives it tighter corner joints and better resistance to racking over time.

What separates this series from entry-level aluminum is the thermal break. Most cheap aluminum windows conduct heat straight through the frame, which is a real problem in a Palm Beach summer. The VLX 80 interrupts that heat path with a non-conductive barrier inside the frame, so your glass does the cooling work instead of fighting the frame. That’s the energy-efficient thermal break referenced in the product’s core design, and it’s the main reason buyers choose the 80 series over thinner, builder-grade units.

TruePane Windows & Doors has been installing ViewLux products in Palm Beach long enough to know which configurations perform best on which elevations. We’ll help you pick the right glass package for a west-facing bedroom versus a shaded east wall. Call (850) 801-5596 and we’ll walk you through it.

Technical Specifications

The VLX 80 gets its name from its wall thickness. At 0.079 inches, the aluminum extrusion is thicker than standard residential framing, which means less flex, better screw retention, and a stiffer sash that stays square over decades of operation. The overall profile width is 1.97 inches, which gives the window enough internal channel space for a proper thermal break and a clean exterior sightline.

Here’s the full breakdown, in plain terms:

• Wall thickness: 0.079 inches, a heavy-gauge residential profile
• Profile width: 1.97 inches, narrow enough for modern sightlines
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated
• Frame finishes: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed screen, or retractable screen for an unobstructed view when closed
• Operation: Top-hinged awning, outward swing, multi-point locking hardware
• Thermal performance: Thermally broken frame, NFRC-rated energy package
• Installation standard: AAMA 2400/2410 compliant install, AAMA 812 low-expansion foam on all perimeter joints

Every VLX 80 we order for a Palm Beach project is sized and configured to the opening, not cut from off-the-shelf inventory. That means no shim-stuffed gaps and no retrofit headaches.

Performance Features

Thermal Efficiency. The VLX 80 frame carries a thermal break that stops heat from moving through the aluminum. That break, combined with Low-E glass, keeps a Palm Beach home measurably cooler and lowers the load on the air conditioning system. NFRC-rated performance values are available for any glass package we quote.

Acoustic Performance. Aluminum is dense, which is an advantage when you’re blocking road noise from Okeechobee Boulevard or flight path noise near Palm Beach International. Adding laminated glass to the VLX 80 delivers a real drop in sound transfer, and the multi-point hardware keeps the sash pulled tight against its weatherstripping so sound doesn’t leak around the edges.

Airtightness & Weather Seal. The VLX 80 uses a continuous compression seal around the sash perimeter. When the window locks, the sash pulls in at multiple points and squeezes that seal evenly. That’s what gives the unit its airtightness rating, and it’s also what keeps conditioned air inside during a Palm Beach summer when the AC is working hard.

Waterproofing. The top-hinged design naturally sheds water away from the opening, but the drainage path inside the frame is what keeps wind-driven rain out. The VLX 80 has a built-in sill drainage system that collects any water that makes it past the outer seal and channels it back outside. It’s a pressure-equalized design, which is the standard a window needs to meet in a hurricane-prone coastal market like Palm Beach.

Wind Resistance. Palm Beach building codes demand window systems that can handle sustained wind and pressure cycling. The VLX 80 is wind-load rated for local climate requirements, and when paired with impact-resistant laminated glass, it becomes a legitimate storm protection product, not just a window. We’ll verify the design pressure rating for your specific opening size and height above grade before ordering.

Security & Hardware. Awning windows are inherently harder to force open than sliding or double-hung windows because the sash presses into the frame from the outside. The VLX 80 adds a multi-point lock that engages at more than one location along the sash. With laminated glass installed, entry through the glass itself becomes significantly slower, which is exactly what a burglar wants least.

Color & Glass Options

The VLX 80 comes in six frame finishes, and each one reads differently against Palm Beach architecture. Pure White remains the most popular choice for the classic coastal look, it pairs well with stucco and bright trim. Premium Black has gained a lot of ground in the last few years, especially on modern builds and renovated mid-century homes in Palm Beach Gardens and Lake Park where dark frames create a crisp contrast against white walls. Anodized Silver is the closest thing to a commercial look, clean, metal-forward, and low-maintenance. Bronze suits older Florida homes with earth-tone exteriors. Champagne lands somewhere between bronze and silver, a warm metallic that hides salt residue better than darker tones. And Teak Wood is a woodgrain finish that gives you the texture of natural timber without the rot and termite risk of real wood in a South Florida climate.

On the glass side, Clear glass is the budget-friendly standard. Frosted glass is the answer for bathrooms, laundry rooms, or any window facing a neighbor at close range. Low-E is the energy workhorse, a microscopic coating that reflects heat but lets light through. Tempered glass is safety glass, required by code in certain locations near doors and within 18 inches of the floor. Laminated glass is the two-layer impact option, it holds together on impact and gives you storm protection along with the acoustic and security benefits. Many Palm Beach homeowners choose Low-E on the outer pane and clear on the inner for the best balance of efficiency, clarity, and cost.

Installation by TruePane Windows & Doors in Palm Beach

Here’s the truth about aluminum awning windows: even a well-built unit like the VLX 80 will leak, bind, or fail early if it’s installed wrong. The manufacturer’s warranty covers defects in the product. It does not cover a bad installation. We’ve pulled windows out of Palm Beach homes that were shimmed incorrectly, set out of square, or sealed with generic caulk that had already pulled away from the frame. Those windows were never going to perform, regardless of the brand stamped on them.

Our installation process is built around the AAMA 2400/2410 standard, which is the industry baseline for proper window and door installation in residential construction. It starts before we even order your windows, with a full pre-install inspection of the opening, the surrounding framing, and the existing flashing condition. We measure at three points on every side and order to the smallest workable dimension, so the finished unit fits without brute forcing.

On install day, every VLX 80 goes in level, plumb, and square. We set the frame, check the diagonals, and make adjustments before the perimeter is sealed. Then we run AAMA 812 low-expansion foam around all four sides of the frame. That foam does two jobs: it insulates the gap between the window and the rough opening, and it expands gently enough that it won’t warp the aluminum frame. After the foam cures, we trim it and apply a continuous exterior sealant, then we install the interior trim. Before we clean up, we run a water test on the exterior of each window and watch the interior for any sign of intrusion. If water gets in, we fix it before we leave. We don’t leave windows that leak.

In Palm Beach specifically, the installation details matter more than in most markets. The salt air accelerates corrosion on exposed fasteners, the humidity attacks unsealed joints, and the afternoon rain cycle tests drainage paths daily during the wet season. We account for all of that in how we set, seal, and trim every unit. Most VLX 80 installations take one day for a handful of windows, or longer for whole-home projects. We’ll give you a timeline with the quote.

Frequently Asked Questions - VLX 80 Awning Window

What is the lead time for the VLX 80 Awning Window?

Most VLX 80 orders arrive at our Palm Beach warehouse in 3 to 5 weeks from the date the order is confirmed, depending on the glass package and finish combination. Custom sizes or laminated glass can push that to 6 weeks. We’ll give you a firm production timeline when we quote your project. Call (850) 801-5596 and we’ll check current lead times for your exact configuration.

Does the VLX 80 qualify for energy tax credits?

It can, depending on the glass package. The VLX 80 with Low-E glass can meet the Energy Star performance criteria in the South Florida climate zone, which makes it eligible for the federal energy efficiency home improvement credit. You’ll need the NFRC label from your specific unit to confirm. Bring it up when you call for a quote and we’ll point you toward the configurations that qualify.

What warranty comes with the VLX 80 Awning Window?

ViewLux provides a manufacturer’s warranty on the VLX 80 frame and hardware, and the glass carries its own coverage for seal failure. The exact terms depend on the glass package you choose. The key factor in keeping that warranty valid is installation by an authorized partner like TruePane Windows & Doors. We install per AAMA standards, which means the manufacturer can’t deny a claim due to a sloppy install. We’ll explain the full warranty terms when we quote your project. Questions before then? Call (850) 801-5596.

Can I customize the size of the VLX 80?

Yes. The VLX 80 is built to order, not pulled from stock, so we can size each unit to your exact opening dimensions. Awning windows work especially well as wide, short units, think 4 feet wide by 2 feet tall, or as stacked banks of two or three over a picture window. We’ll measure, confirm the design pressure rating for your specific size and elevation, and order accordingly. Call (850) 801-5596 to set up a free measurement.

How do I maintain aluminum frames in a coastal climate?

The short answer: rinse the frames with fresh water every few months and wipe down the tracks. Palm Beach salt air leaves a fine residue on metal, and if it sits for months it can etch the finish over time. Beyond that, keep the drainage channels clear of debris, wipe the weatherstripping with a damp cloth, and don’t paint or drill into the frame. If a hardware part ever needs servicing, we stock replacement components for the VLX 80 and can handle repairs in one visit. Call (850) 801-5596.

Get a Quote - VLX 80 Awning Window in Palm Beach

If you’re building, remodeling, or replacing windows in Palm Beach, the VLX 80 is worth a serious look. Call TruePane Windows & Doors at (850) 801-5596 and we’ll schedule a free on-site measurement, walk you through glass and finish options, and give you a written line-item quote with no hidden change orders. You’ll get real numbers for a real product, installed by a local Palm Beach team that stands behind the work.

Written by the team at TruePane Windows & Doors, authorized ViewLux installation partners serving Palm Beach, FL.