Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterViewLux Roof Replacement & Installation in Palm Beach: What to Know First
TruePane Windows & Doors handles independent ViewLux roof replacement and installation across Palm Beach, from El Cid to Northwood and up through Palm Beach Gardens. Most ViewLux skylight and roof-glazing replacements run one to three days on site depending on flashing condition and curb configuration. We are not the cheapest bid in Palm Beach and we won’t pretend to be. What you get is the work done right the first time, with both warranty layers registered in writing before the truck leaves your driveway.
This page is for homeowners who already own a ViewLux product, have watched it leak or fog, and want a straight answer on what it costs to replace. Call us at (850) 801-5596 for a free estimate. A live person answers.
How ViewLux Products Fail - and How We Fix Them
We work on enough ViewLux units in Palm Beach to know their failure patterns by series. Here’s what we actually see, and what we do about it.
- ViewLux Skylite Series curb-mount leaks at the welded corners. The Skylite uses a welded aluminum curb frame, and after ten or twelve Palm Beach summers the corner welds fatigue and hairline-crack. Water doesn’t pour in; it weeps, stains the drywall, and the homeowner doesn’t catch it for months. We remove the unit, inspect the curb, and install the replacement with new sealant bedded to manufacturer depth, not skimped to save a trip.
- ViewLux Vista Series glass units lose their argon seal along the south-facing slope. Roof glazing in Palm Beach takes direct sun from morning to evening. The Vista’s dual-seal edge construction fails on the south exposure first. The glass clouds, the view goes hazy, and the owner thinks the frame failed when it’s actually the sealed unit. We order the correct IGU with matching Low-E coating and replace the glazing without disturbing the frame or the flashing.
- ViewLux classic aluminum frame corrosion at the weep holes. Palm Beach salt air works hard on aluminum. The weep holes on older ViewLux frames clog with salt scale and the frame holds water. We see pitting along the bottom rail on units installed before 2010. If the frame is still structurally sound, we clean the weeps, treat the corrosion, and reinstall. If it’s gone too far, we quote the full replacement.
- ViewLux curb flashing retrofits that were never done right on the original install. A surprising number of ViewLux roof units in Palm Beach were set by roofers, not glaziers. The curb flash is improvised, the counterflashing is short, and the first good summer storm finds the seam. When we set a replacement, we replace the flashing assembly at the same time and tie it into the roof deck the way it should have been done originally.
- ViewLux hinge and operator wear on venting roof windows. The venting units on ViewLux roof windows use a telescoping operator arm that corrodes quickly in coastal air. The window still opens, but the arm binds and the crank gets harder each season. We stock the common operator replacements and can do the job in a single visit without hauling the full frame off the curb.
Our ViewLux Roof Replacement & Installation Process
Every ViewLux job follows the same sequence, and it doesn’t get shortcut. Here’s how it works when you call us.
- 1
Call and describe the problem. A live person answers, takes notes, and asks the right questions: what series is stamped on the frame, how long it’s been leaking, whether you’ve had roof work done nearby.
- 2
Site visit and opening measurement. A background-checked, uniformed technician comes out, measures the opening twice, and inspects the flashing, curb, and frame condition before quoting anything.
- 3
Quote on paper. You see the numbers side by side: OEM replacement parts versus quality aftermarket where available, with the warranty coverage listed for each. No surprise line items later.
- 4
Order and schedule. We order the right series-specific parts or the full replacement unit, confirm the delivery date, and schedule the install in one trip.
- 5
Remove, set, seal, and flash. We pull the old unit, true the curb, install the new ViewLux or the correct substitution, bed the sealant, and set the flashing so it sheds water the way it should.
- 6
Test and register warranties. We run the unit through its operation, check for daylight gaps, and register both warranty layers in writing before the truck leaves the driveway. The Done Right Promise applies to every ViewLux job we do.
What ViewLux Roof Replacement & Installation Costs in Palm Beach
ViewLux roof work in Palm Beach runs higher than standard replacement because the products are specialized and the roofline conditions in this area are rarely simple. Here’s what we typically quote.
- IGU replacement on a fixed ViewLux Vista or Skylite unit: $480-$900 depending on size and coating
- Full curb-mount Skylite replacement, including new flashing and sealant: $1,800-$3,200
- Complete ViewLux roof window replacement with operator and hinge replacement: $2,400-$4,500
- Flashing repair and re-bed without replacing the glass: $650-$1,200
Your final price depends on roof pitch, deck condition, access, and whether the original flashing can be saved or needs full replacement. Call (850) 801-5596 for a free written estimate with line items, not a round number pulled from the air.
Why Palm Beach Homeowners Call TruePane Windows & Doors for ViewLux Work
Dale Kessler grew up in El Cid and has spent the better part of two decades setting and servicing windows and doors across Palm Beach County. The founding rule still holds: if the pane is not true, the job is not done. We bring that standard to every ViewLux roof unit we touch.
We’re an independent ViewLux service provider, not an affiliated dealer. That matters when it comes to honest parts recommendations. If your ViewLux is worth repairing, we’ll repair it. If an aftermarket component does the job better and keeps the warranty intact, we’ll show you both options on paper. And because we also service PGT, CGI, CWS, and ES Windows, we can tell you how your ViewLux compares and what a full replacement would look like in another line if that day comes.
We stand behind the work. Both manufacturer warranty layers registered in writing, durations stated, and the Done Right Promise on every job. No arguing, no fine print.
FAQs
Yes, in most Palm Beach homes we can replace the ViewLux unit itself without disturbing the roof deck or the surrounding shingles, as long as the original curb and flashing are still sound. When the flashing is compromised, we replace it as part of the job because setting a new unit on old flashing just moves the leak six months down the road. Call (850) 801-5596 and we’ll give you an honest assessment.
If the frame and curb are in good shape, replacing just the sealed IGU is almost always the smarter money, typically $480 to $900 in Palm Beach depending on size and glass coating. If the frame is corroded or the flashing is shot, a full replacement saves you paying twice. We’ll show you both prices side by side on paper.
Yes. We register both manufacturer warranty layers in writing before the truck leaves the driveway, and our Done Right Promise covers the workmanship regardless of brand. You get the ViewLux factory coverage that applies to the part plus our written workmanship guarantee. That’s the Keystone Standard on every job.
Most single-unit ViewLux replacements run one to two days on site, with the total timeline driven by parts delivery. During storm season we may schedule around weather windows so we’re not setting a new unit in the middle of a downpour. Call (850) 801-5596 for a current timeline based on your specific unit.
We handle ViewLux roof glazing on low-slope residential builds and some light commercial structures, but the flashing and drainage requirements are different from pitched residential roofs. We’ll inspect first and tell you plainly if the job is one we should take on or if you need a structural specialist. We don’t pretend to be something we’re not.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.