Mr-Glass Energy-Efficient Windows Nationwide | TruePane Windows & Doors

Mr-Glass Energy-Efficient Windows in Palm Beach: What to Know First

We service Mr-Glass energy-efficient windows throughout Palm Beach, and most repairs or replacements take one visit. A failed Mr-Glass insulated unit typically runs $380 to $750 to reglaze, while a full replacement window from a comparable line falls between $900 and $1,800 installed. We quote both paths on paper so you can decide with the numbers in front of you.

Call (850) 801-5596

This page is for Palm Beach homeowners who own Mr-Glass windows that have lost their seal, clouded between the panes, or stopped holding temperature the way they did ten years ago. You want to know what went wrong and what it will cost to make it right. We’ll walk you through it. Call (850) 801-5596 any hour and a live person answers.

TruePane Windows & Doors is an independent Mr-Glass service provider. We are not affiliated with or authorized by Mr-Glass, but our technicians have opened enough of their units to know exactly what happens to them in this climate.

How Mr-Glass Products Fail - and How We Fix Them

In Palm Beach, Mr-Glass windows contend with salt air, hard sun, and humidity that sits north of 70 percent most of the year. Here’s what we actually find when we open them up:

• Seal failure on the Mr-Glass insulated low-E units. The desiccant strip inside the spacer bar saturates over 8 to 12 years of Palm Beach humidity. Once that happens, moisture gets between the panes and the low-E coating oxidizes. We see this as a faint milkiness that never wipes off. The fix is a full reglaze: new IG unit, new desiccant, fresh sealant, measured to the existing frame. A fogged Mr-Glass sash cannot be “dried out” and resealed in place. Anyone who tells you otherwise is guessing.
• Argon loss without visible fog. Mr-Glass units filled with argon lose roughly 2 to 4 percent of their gas per year through normal seal permeation. By year 12, a Palm Beach window facing west has lost most of its fill. The glass looks fine, but the room sits five to seven degrees warmer in afternoon sun. We test for this with a gas-fill meter before recommending replacement. If the frame and hardware are still true, a reglazed unit with fresh argon restores the original thermal rating for a fraction of a full tear-out.
• HVAC-driven condensation on Mr-Glass sliders and casements. In older Palm Beach ranchers, Mr-Glass sliders run along the west wall where the AC register sits six inches from the glass. Cold interior air against warm, humid exterior air creates condensation that reads as glass failure. It usually isn’t. Before quoting new glass, we check interior humidity and register placement. If the unit is sound, the fix is airflow, not replacement, and we will tell you that straight.
• UV-degraded glazing seals on Mr-Glass fixed picture windows. Fixed units with eastern exposure in Palm Beach catch the harshest morning sun. The exterior glazing bead dries and cracks, letting water wick into the frame channel. You will see white oxidation trails on the aluminum. We pull the old bead, clean the channel, and set a fresh silicone glazing bead rated for coastal UV. Done right, this extends the frame’s life another decade.
• Frame flex on Mr-Glass single-hung units in masonry openings. Palm Beach homes built in the 1970s and 1980s have concrete block frames that settle. Mr-Glass single-hungs set into those openings flex at the corners, which stresses the seal. The first symptom is a sash that starts to bind in May and loosens by November, while a soft hiss of air moves at the meeting rail. We shim and re-anchor the frame before reglazing so the new unit is not fighting the opening.

Our Mr-Glass Energy-Efficient Windows Process

Here’s how a Mr-Glass job runs when you call TruePane Windows & Doors.

1. 1
   On the phone: A live person answers. We ask what you are seeing: fog, draft, binding sash, hot glass. We schedule a visit that fits your day, not ours.
2. 2
   At the opening: A background-checked, uniformed technician measures every unit twice, checks the frame with a level, and tests the glass with a gas-fill meter if needed. We do not quote from the curb.
3. 3
   Parts decision on paper: We lay out OEM and quality aftermarket IG units side by side, with the price difference shown in writing. For Mr-Glass frames, a properly sized aftermarket low-E unit often matches or beats the original rating. If OEM is the right call, we say so.
4. 4
   The install: The old unit is removed cleanly. The frame channel is scraped, primed if it shows oxidation, and the new unit set with fresh sealant at the right depth. If the pane is not true, the job is not done.
5. 5
   Testing before we leave: We run the sash, check for air movement at every edge, and inspect the interior humidity. We register both manufacturer warranty layers in writing before the truck leaves the driveway.
6. 6
   The Done Right Promise: If anything we touched is not right within 90 days, we make it right. No paperwork fights, no arguing.

What Mr-Glass Energy-Efficient Windows Costs in Palm Beach

Straight numbers, written the way we quote them:

• Reglaze a Mr-Glass insulated low-E sash: $380 to $750 per unit depending on size and whether it carries argon fill.
• Full replacement of a Mr-Glass picture window with comparable low-E glass: $900 to $1,600 installed.
• Replacement single-hung in a standard Palm Beach masonry opening: $1,100 to $1,800 installed, depending on frame material and glass package.
• Whole-home audit with gas-fill and thermal testing: $89 seasonal rate when paired with any repair over $250 (which also carries $50 off).

What moves the price: masonry anchoring, frame oxidation that needs remediation, oversized openings, and whether the glass carries argon or krypton fill. What does not move the price: our mood, the weather, or a surprise line item on the bill. Call (850) 801-5596 and we will give you a written quote before any work starts. Estimtes are free.

Why Palm Beach Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We have served Palm Beach County since 2008, the last 17 under the TruePane name. Dale Kessler grew up in El Cid, the residential stretch west of the Intracoastal, where his father spent weekends repairing jalousie windows on houses that had seen forty Florida summers. That is not marketing. That is the reason we answer the phone at 2 a.m. and the reason our technicians measure every opening twice.

Every Mr-Glass job carries our Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we pull out of your driveway. If the pane is not true, the job is not done. We are also authorized installers for PGT, CGI, CWS, and ES Windows, which means if your Mr-Glass frame is beyond saving, we can show you a comparable or better line side by side, on paper, without leaving you guessing. If the frame is right and the glass is rated, the rest is just following through.

FAQs