Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Impact Garage Doors: The Palm Beach Owner’s Guide
We stock and install ES Windows-compatible impact garage doors throughout Palm Beach, with most complete door replacements running between $4,800 and $9,200 installed depending on size, track hardware, and opener integration. Same-week scheduling is typical once we confirm your door’s measurements and current track condition. Most Palm Beach homeowners discover a problem the hard way: the door binds mid-cycle in July heat, a panel shows hairline cracking at the corner welds after a storm season, or the bottom seal has hardened and now lets water ride in during a hard afternoon rain.
If that sounds like your door, you’re in the right place. We’ve been servicing impact-rated doors across Palm Beach County since 2008, and we’ll tell you straight whether the door needs replacing or whether the problem is a $140 hinge set and a squared track. Either way, we quote it on paper before any work starts.
Which ES Windows Models This Applies To
ES Windows builds its impact garage doors in three primary lines that we see regularly in Palm Beach: the ES Lite (aluminum frame, non-insulated, most common on older homes east of Dixie Highway), the ES StormGuard (reinforced stiles, laminated glass inserts in select panels), and the ES Coastal (heavy-gauge aluminum, rated for large openings up to 18 feet). The quickest way to identify your model is the aluminum ID tag riveted to the inside left track rail, about knee height. It lists the series, the Miami-Dade NOA number, and the manufacturing date.
One compatibility gotcha we’ve learned: ES Windows changed its hinge spacing from 14 inches to 16 inches on StormGuard doors built after 2019. If you’re replacing individual panels, that measurement determines whether a pre-2019 panel will bolt to a post-2019 frame. We match OEM panels when the door is under warranty and use quality aftermarket equivalents, primarily from PGT and CGI, when the door is out of warranty and the owner wants a better price. For springs, tracks, and rollers, OEM is not always the smarter buy. We’ll show you both options side by side and let the numbers speak.
Signs Your ES Windows Impact Garage Door Is Failing
- Door binds or jumps off the track mid-travel. This usually means a roller has worn flat on one side, or the track has shifted out of square due to settling. Overlooking it trashes the cable drums faster than you’d believe.
- Corner welds on bottom panels show hairline cracks. Salt air around Palm Beach accelerates this on aluminum doors. Once a weld cracks, the panel loses its load rating and needs replacement before the next storm inspection.
- Water and sand accumulate inside the garage after heavy rain. The bottom seal has hardened or the side weatherstripping has pulled loose. In Palm Beach, that’s not cosmetic. It’s where rust starts on tracks and where millipedes move in.
- Visible gaps of daylight along the edges when closed. Impact doors rely on a tight seal against the opening for wind-load resistance. A gap means the door has racked out of square, or the hinges have elongated their mounting holes.
- Opener strains and reverses frequently. Most often, the torsion spring has lost tension and the opener is doing work it was never designed to do. That’s a safety concern we address before anything else.
Replacement Cost & What’s Included
A full ES Windows impact garage door replacement in Palm Beach runs $4,800 to $9,200 installed. The range hinges on door width (single 8-by-7 versus double 16-by-7), whether the existing tracks and hinges can be reused, and whether the spring system needs conversion from extension to torsion. We line-item every quote: door, hardware, springs, weatherseal, haul-away, and labor are all listed separately, so there’s no mystery money buried in the total.
If only a panel or hardware set is failing, panel replacement runs $480 to $1,400 depending on width and glass configuration, and a full track-and-hinge kit typically lands between $900 and $1,800 installed. Every door and part we install carries the manufacturer’s written warranty, registered in your name at install, plus our Done Right Promise. If it’s not right, we fix it. No paperwork, no arguing.
DIY or Call Us?
Here’s the honest split. You can safely check springs for visible rust, test the door balance by disconnecting the opener and lifting manually, and inspect weatherseal for cracks. That’s about it. The moment a repair involves torsion springs under tension, cable drums, or track realignment, we recommend a trained professional. A torsion spring releasing under load can break bones or worse. That’s not a warning we give lightly. We’ve pulled enough homeowners’ bent wrenches out of track assemblies in Palm Beach to know the difference between a save and a hospital trip.
If you’ve diagnosed the failure and just need the part, we stock common ES Windows hinge sets, roller kits, bottom seals, and spring assemblies on our trucks. For anything we don’t have, we can usually have it within three to five business days. Call (850) 801-5596 and we’ll tell you over the phone whether your door sounds worth repairing or has crossed into replacement territory. If you want, we’ll come measure and confirm on paper.
FAQs
From what we see in the field, expect 15 to 20 years of service from an ES Windows impact door in Palm Beach, with the salt air the biggest lifespan factor. Doors within two miles of the Intracoastal often need hardware replacement at the 10- to 12-year mark even when panels hold up fine.
Yes, in most cases. Replacing a panel, hinge set, roller kit, or complete track assembly costs far less than a new door. Where we draw the line is when the panel welds show structural cracking across multiple panels, or when the door has racked enough to compromise the seal. Call (850) 801-5596 and we’ll give you an honest read before recommending anything.
Most single-door replacements in Palm Beach take four to six hours on site, including hauling away the old door, setting the new springs, and confirming the door travels balanced. We schedule one crew, one visit, and no second appointment left hanging.
We stock common hardware sets, bottom seals, roller kits, and spring assemblies for ES Windows doors on our service trucks. Uncommon panel sizes or custom glass configurations are ordered from the manufacturer or a matching aftermarket line. We’ll tell you the wait before any work is scheduled.
Call (850) 801-5596 for a free, line-item estimate on your ES Windows impact garage door. A live person answers, day or night, and we’ll walk through what you’re seeing before we ever schedule a truck. We’ve served Palm Beach since 2008, and we don’t leave until the door runs true. If the frame is right and the glass is rated, the rest is just following through.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After