Andersen Window Replacement Nationwide | TruePane Windows & Doors

Andersen Window Replacement in Palm Beach: What to Know First

Andersen window replacement in Palm Beach means swapping tired, leaky, or fogged Andersen units for new glass and frames that can stand up to salt air and hurricane season. Most Andersen replacements run $900 to $2,800 per opening depending on the series, glass package, and whether we’re doing a full frame or an insert. If you’re reading this, you probably own a Andersen product that’s past its useful life, and you want it handled by someone who knows the line well enough to tell you straight whether it’s worth repairing or replacing. Call (850) 801-5596 and we’ll walk you through it.

Call (850) 801-5596

How Andersen Products Fail - and How We Fix Them

Andersen makes a solid window, but every series has its weak points. In Palm Beach, the climate finds them faster than most places. Here’s what we see on a regular basis:

• Andersen 200 Series (wood core, vinyl clad): The vinyl cladding separates at the corners after ten or fifteen years of direct afternoon sun. Water gets behind it, the wood core starts to soften, and the sash drops out of square. On a replacement job, we check every corner weld before quoting. If the frame is still sound, we can do an insert and save the opening. If the corners are gone, it’s a full frame replacement. Most 200 Series windows in Palm Beach that see west-facing sun need full frame work by year twelve.
• Andersen 400 Series (wood interior, vinyl exterior): This is the series we replace most often in Palm Beach. The wood interior is beautiful when it’s maintained, but the coastal humidity attacks the sash joints where the wood meets the glass. We see rot at the bottom rail and the meeting rail, especially in homes within a mile of the Intracoastal. The fix is not a patch job. We pull the sash, check the frame, and if the frame’s intact, we replace the sash with a factory-matched unit. If the frame’s compromised, the whole opening gets rebuilt.
• Andersen Narroline (older pre-2000s double-hung): These have a coiled spring balance system that wears out. When the balance gives out, the sash won’t stay up, and the homeowner has a window that slams shut on its own. A lot of palm beach condos still have Narroline windows from the original 1980s build, and the balances are all failing around the same time. We replace the balances and the sash together, not one at a time, because doing one at a time just means you’ll call us again in six months for the next window.
• Andersen Frenchwood gliding patio doors: The rollers on these doors are nylon, and they pick up sand and grit from the beach. The track wears out, the rollers flat-spot, and the door binds in July when the humidity swells the wood. We see this in Palm Beach a lot. The door will slide fine in January and stick in August. We replace the roller assembly with a stainless steel version and re-shim the track, and the door glides with two fingers after the work is done. If the panel itself is swollen past tolerance, we replace the panel, not the whole frame.
• Andersen storm door glass inserts: People forget these are replaceable. The glass insert scratches and hazes over time, and many Andersen owners think they need a whole new storm door. In Palm Beach, the sun and salt etch the glass faster than most places. If the door frame is solid, we replace just the insert with the correct size from an aftermarket supplier that matches the original profile. It’s a fraction of the cost of a new door and it takes about an hour on site.

Our Andersen Window Replacement Process

We’ve been doing this long enough that the process runs like this, every single time:

1. 1
   You call, a person answers. No voicemail tree, no callback form. You describe the problem. We ask the right questions: which series, what the symptom is, how long it’s been happening.
2. 2
   We come out and measure. Every opening gets measured twice. We don’t trust the original builder’s numbers and we don’t trust the old window’s label. We measure the rough opening and the existing frame.
3. 3
   We diagnose before we quote. Is the frame sound? Is the rot surface-level or structural? Can the sash be replaced or does the whole unit come out? You get the answer on paper.
4. 4
   We quote side by side. If you’re wrestling with whether to stay with Andersen or switch to something else, we lay out the options: Andersen replacement, or comparable lines from Pella, PGT, or CGI. You see the numbers next to each other. No pressure, no pushing.
5. 5
   We install, test, and clean up. The old window comes out, the new one goes in with proper flashing and sealant depth. We operate it several times in front of you. Then we sweep and haul the debris.
6. 6
   We register the warranty before we leave. Both manufacturer warranty layers get registered in writing, with the durations in black and white. If something isn’t right, the Done Right Promise means we fix it. No paperwork fight, no arguing.

What Andersen Window Replacement Costs in Palm Beach

Here are honest numbers for Palm Beach, based on the work we actually quote:

• Andersen insert replacement (sash only, frame intact): $900 to $1,400 per opening.
• Full frame Andersen replacement (permitting and flashing included): $1,800 to $2,800 per opening.
• Andersen specialty shapes (arched tops, circles, angles): $2,200 to $3,800 per unit.
• Andersen Frenchwood patio door replacement (full unit): $3,500 to $5,500 depending on size and glass package.

What moves the price: whether the frame is sound, whether the opening is square, whether you’re in a historic district with architectural review, and whether you want impact glass or standard insulated. On a full frame job in a historic district, plan for an extra week or two for approvals. Call (850) 801-5596 for an exact quote for your house. Estimates are free.

Why Palm Beach Homeowners Call TruePane Windows & Doors for Andersen Work

We’ve been at this since 2008. Dale Kessler started this company in 2008, but the Kessler family was repairing windows in Palm Beach long before that. We’re an independent Andersen service provider, which means we work for you, not for the factory. We carry parts for the Andersen lines that show up in Palm Beach homes, and when a part isn’t available, we tell you that on the first visit, not the third. Our techs are background-checked, uniformed, and trained to treat your house the way they’d treat their own mother’s. Every job is covered by the Done Right Promise and The Keystone Standard: both warranty layers registered in writing before the truck leaves the driveway. We also install and service Pella, PGT, and CGI, so if Andersen isn’t the right answer for your opening anymore, you’ll see the comparison on paper, not hear it as a sales pitch. If the pane is not true, the job is not done. And we stand behind it.

FAQs