Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterShingle, Tile & Metal Roofing in Palm Beach: What It Costs and What to Expect
Shingle, tile, and metal roofing in Palm Beach runs anywhere from $9,800 to $38,000 depending on material, roof complexity, and the condition of the existing decking. Most full replacements in the Palm Beach area land between $14,000 and $22,000 for an average 2,200-square-foot home. TruePane Windows & Doors provides straight pricing, licensed installation, and a written line-item quote before any work begins. Call (850) 801-5596 to schedule a free estimate.
Trusted Shingle, Tile & Metal Roofing for Palm Beach Homeowners
Palm Beach weather does not negotiate. Salt air, hurricane season, and afternoon thunderstorms work on a roof year-round, and by the time a leak shows up on the ceiling, the damage underneath has usually been building for months. We’ve served Palm Beach homeowners since 2008 through the craft tradition Dale Kessler built, and we treat every roof inspection as a job that has to be done right the first time. No pressure, no scare tactics, just an honest assessment of what your roof needs now and what it will need in five years. Call (850) 801-5596 and a live person answers, day or night.
What Our Shingle, Tile & Metal Roofing Service Includes
Asphalt Shingle Roofing
Architectural asphalt shingles remain the most common roofing material in Palm Beach for good reason: they handle wind uplift well when installed correctly, they’re straightforward to repair, and they cost less up front than tile or metal. We install and replace shingle roofs with full underlayment replacement, proper nail patterns per manufacturer spec, and ridge venting that actually moves air. In neighborhoods like South Palm Beach and Lake Park, we regularly see shingle roofs that failed early because a previous installer skipped the underlayment or used the wrong nail length. We don’t skip steps.
Concrete and Clay Tile Roofing
Tile roofs are common across Palm Beach and West Palm Beach, and they present a specific set of challenges when it comes to repair and replacement. Concrete and clay tile can last 50 years or more, but the underlayment beneath them typically fails around year 20 to 25, which means leaks develop even when the tiles themselves look fine. We handle full tile roof replacements, underlayment swaps, and broken tile replacement with matching profiles. The key with tile is walking it correctly; a careless crew will crack more tiles than they replace, and we train our technicians to work tile roofs without causing collateral damage.
Standing Seam Metal Roofing
Metal roofing has gained traction in Palm Beach Shores and Riviera Beach because it shrugs off hurricane-force winds better than almost anything else on the market. Standing seam panels run vertically from ridge to eave with concealed fasteners, which means fewer penetration points and a lifespan that can exceed 40 years with proper maintenance. We can walk you through both standing seam and metal shingle systems, and we’re straightforward about the tradeoff: metal costs more up front, but you’re unlikely to replace it again in your lifetime. For homeowners planning to stay in the house another two decades, metal often makes the most mathematical sense.
Roof Repair and Leak Remediation
Not every roof problem requires a full replacement, and a company that tells you otherwise is selling you something. We repair flashing failures, valley leaks, storm damage, and isolated shingle or tile loss across Palm Beach and Lantana. A repair is only worth doing if the surrounding roof system still has meaningful life left in it; when it doesn’t, we’ll tell you plainly and show you why with photos. Our repair work comes with the same Done Right Promise as a full replacement: if it’s not done right, we make it right, no paperwork fights.
Roof Inspection and Certification
If you’re buying or selling a home in Palm Beach, a roof certification can make or break a closing. We perform detailed roof inspections that document remaining useful life, current deficiencies, and repair recommendations in plain language. Homeowners in Atlantis and Greenacres use our inspections before listing to avoid surprises during escrow. Buyers use them to negotiate from a position of fact rather than guesswork. Either way, you get a written report with photos, and an honest opinion on whether the roof has five years or fifteen left in it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Shingle, Tile & Metal Roofing
We’ve installed and serviced hundreds of PGT and CGI metal and impact-rated roofing systems across Palm Beach County, and we stock OEM parts for both lines so repairs don’t stall waiting on a distributor. PGT’s standing seam profiles require specific clip spacing and panel alignment to meet wind-uplift ratings, and we follow their installation manual to the letter because warranty registration depends on it. CGI’s metal roofing lines carry similar wind-driven rain ratings, and we’ve seen too many “bargain” installs where a contractor substituted generic clips and voided the warranty entirely. We register every manufacturer warranty layer in writing before the truck leaves your driveway.
ViewLux tile and metal products also cross our workbench regularly, particularly on custom homes in Palm Beach proper where homeowners want a specific profile that matches an addition or a neighboring structure. ViewLux’s tile profiles have specific underlayment compatibility requirements, and knowing those details is the difference between a roof that performs for 30 years and one that starts staining at year five. Whether you have PGT, CGI, or any other make on your roof, we can assess it, repair it, or replace it with a warrantied installation. If you need window or door work alongside your roofing project, our home page covers the full scope of what TruePane Windows & Doors handles.
Signs You Need Shingle, Tile & Metal Roofing Right Now
- Granules in the gutters. Asphalt shingles shed ceramic granules as they age, and when you start seeing piles of them in your Palm Beach gutters, the shingles are past the halfway point of their life. Granule loss exposes the asphalt to UV, accelerating deterioration through the next hurricane season.
- Daylight visible in the attic. If you can see pinpoints of light through the roof deck from inside your attic, water can get through those same openings. This is most common in older Palm Beach homes where the original decking has warped, and it almost always signals a repair or replacement need within the year.
- Cracked or slipped tiles after a storm. Tile roofs in Westgate and Palm Springs regularly lose a few tiles during summer squalls. One or two broken tiles is a quick fix; cracked tiles across multiple sections suggests the underlayment has shifted and the roof structure itself may need attention.
- Rust streaks or fastener corrosion on metal panels. Standing seam metal should not show rust at the seams or around fasteners. If it does, the protective coating has failed, and coastal salt air in Palm Beach Shores will accelerate that rust into pinhole leaks faster than most homeowners expect.
- Ceiling stains spreading after rain. A water stain on your ceiling is never a one-time event. Roof leaks travel, and by the time moisture reaches the drywall, it has already saturated insulation and possibly the decking. The longer it waits, the more expensive the fix becomes.
Our Shingle, Tile & Metal Roofing Process - Step by Step
- 1
Free on-site assessment. We walk the roof, inspect the decking from the attic side when possible, and document everything with photos. You get a written report that separates what needs attention now from what can wait, and we don’t quote a full replacement unless the evidence supports it.
- 2
Written line-item quote. Before any work starts, you receive a fixed-price quote that lists every material, every labor line, and every permit fee. No allowances that balloon later, no “unforeseen condition” language that gives us a blank check. The price we quote is the price you pay unless you change the scope.
- 3
Permit and material coordination. We pull all required Palm Beach County permits and coordinate material delivery so the project doesn’t stall. Roofing material shortages happen, and we order weeks ahead rather than promising a start date we can’t keep.
- 4
Installation with daily cleanup. Our background-checked, uniformed crew handles tear-off, decking repair, underlayment, and installation in sequence. We magnet-sweep the property for nails every day before leaving, because a roofing nail in a bare foot is a call we never want to get.
- 5
Final inspection and warranty registration. We walk the finished roof with you, show you what was done, and register both manufacturer warranty layers in writing before we consider the job closed. The Done Right Promise applies from the day we finish: if it is not done right, we make it right, no arguing.
How Much Does Shingle, Tile & Metal Roofing Cost in Palm Beach?
A typical asphalt shingle roof replacement in Palm Beach runs $9,800 to $16,500 for an average single-story home, depending on roof pitch, decking condition, and shingle grade. Tile roof replacement runs higher, typically $18,000 to $38,000, because the tile itself costs more and the underlying decking often needs reinforcement. Standing seam metal lands between $16,000 and $32,000, with material gauge and finish driving most of the spread. Repairs are more variable: a small leak repair on a shingle roof in Palm Beach might cost $350 to $900, while a tile repair with underlayment patching can run $1,200 to $3,000 depending on access and extent.
What actually moves the price: roof complexity (hip and valley lines, multiple levels), the condition of the plywood decking, whether code requires additional strapping or secondary water barriers, and disposal fees for the old material. The cheapest way to overpay is to accept a low quote that covers only the visible problem and leaves the underlying issues for the next bill. Our free estimates include a full inspection from the roof surface and the attic, so you know what you’re buying before you buy it. For a comparable look at pricing in a nearby market, see Shingle, Tile & Metal Roofing in Lake Worth Beach.
Shingle, Tile & Metal Roofing Near Palm Beach - Our Service Area
We serve Palm Beach proper and the surrounding communities including Lake Worth Beach, Westgate, Palm Springs, Palm Beach Shores, South Palm Beach, Riviera Beach, West Palm Beach, Lantana, Atlantis, Greenacres, and Lake Park. Most Palm Beach-area roofing assessments are scheduled within two to three business days, and the inspection itself takes about an hour. For homeowners in Westgate looking for the same standard of work, see Shingle, Tile & Metal Roofing in Westgate. We also cover the broader Shingle, Tile & Metal Roofing in Palm Beach jurisdiction, including unincorporated pockets of the county that sit between city limits.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Shingle, Tile & Metal Roofing in Palm Beach
Shingle, tile, and metal roofing refers to the three primary residential roofing systems installed across Palm Beach County: asphalt shingles (economical, widely available), concrete or clay tile (heavy, long-lived, common on Mediterranean-style homes), and standing seam or metal shingle panels (high wind resistance, longest lifespan). Each material has different structural requirements, lifespan expectations, and cost profiles. We help Palm Beach homeowners choose the right system for their architecture, budget, and long-term plans rather than selling one material to every house.
A standard asphalt shingle replacement on a single-story Palm Beach home typically takes two to four days from tear-off to final cleanup. Tile and metal replacements run longer, usually five to ten working days, because the material handling is slower and the installation details are more exacting. Weather delays happen, especially during hurricane season, and we keep you updated through every step. Call (850) 801-5596 to get a realistic timeline for your specific roof.
Asphalt shingle replacement runs $9,800 to $16,500, tile runs $18,000 to $38,000, and standing seam metal runs $16,000 to $32,000 for typical Palm Beach homes. Repairs range from $350 for minor shingle work to $3,000 or more for involved tile or flashing remediation. Your exact quote depends on roof size, pitch, decking condition, and material grade. Estimates are free, and the quote we give you is the price you pay.
Yes, we service PGT and CGI metal roofing systems across Palm Beach County, and we stock OEM parts for both lines. Both manufacturers have specific installation requirements that affect warranty coverage, and we follow their manuals exactly because a voided warranty is the most expensive “savings” a homeowner can buy. We register both manufacturer warranty layers in writing before we leave the driveway. If you have another brand, we can assess it honestly and tell you whether repair or replacement makes more sense.
Yes. A live person answers our phones 24 hours a day, 7 days a week, including during and immediately after Palm Beach storms. If you have an active leak, we can often get a tarp on the roof the same day to prevent further interior damage, then schedule the permanent repair once conditions allow. Call (850) 801-5596 any time, day or night, and you’ll talk to a person who can dispatch help.
Every roofing job comes with the Done Right Promise: if the work is not done right, we make it right, with no paperwork fights and no arguing. On top of that, The Keystone Standard means both manufacturer warranty layers are registered in writing with durations stated before we finish the job. The manufacturer covers materials; we cover workmanship; and you get both in writing.
Move vehicles out of the driveway and away from the work zone, clear the attic floor under the roof where possible, and remove wall-mounted items that vibration might dislodge. We cover landscaping and pool areas with tarps, but it helps if you flag fragile plants or irrigation heads before we start. We handle the permits, the material delivery, and the daily cleanup, so there’s nothing else you need to do except be home for the final walkthrough.
Schedule Your Shingle, Tile & Metal Roofing Service in Palm Beach Today
If your Palm Beach roof is showing signs of age or you want a straight answer on what it will cost to replace, call (850) 801-5596. We’ll schedule a free on-site estimate, walk the roof with you or without you, and give you a written quote that holds. A live person answers 24/7, and the estimate carries no obligation. Done right, in writing, at a price you can plan around.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.