Last updated August 27, 2026
Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Windows & Doors Cost Breakdown: The Palm Beach Homeowner’s Reference for 2026
Here’s a number most Palm Beach homeowners don’t expect: replacing windows and doors in a coastal Florida home routinely costs 30% to 60% more than the national averages quoted on big-box websites. The salt air, the wind codes, the impact requirements, the humidity that turns a cheap seal into a fogged pane within three years. None of that shows up in a generic cost calculator. This guide walks through exactly where the money goes in 2026, what a fair quote looks like line by line, and which corners cost you ten times more to fix later. If you’ve been burned once, this is written for you.
Quick Answer
In Palm Beach, a full window replacement on a typical 2,000-square-foot home runs $12,000 to $38,000 in 2026, with mid-range impact-rated windows landing around $900 to $1,600 per opening installed. A single entry door replacement typically runs $2,500 to $7,500, while a sliding glass door runs $3,500 to $9,000. The spread depends on impact ratings, frame material, glass package, and whether the existing opening needs reframing.
Table of Contents
- What Labor Actually Costs in Palm Beach
- Material Costs: Frame by Frame, Glass by Glass
- Impact Windows and Doors: The Palm Beach Non-Negotiable
- Installation Scope: When a Simple Swap Becomes a Structural Job
- Permits, Code, and Paperwork Costs
- The Hidden Costs No Website Quote Includes
- Why DIY Is a Losing Bet on Coastal Windows and Doors
- How to Budget for a 2026 Replacement
What Labor Actually Costs in Palm Beach
Labor for window and door installation in Palm Beach runs $150 to $350 per opening for standard replacements, and $400 to $900 per opening for impact-rated or custom work. That’s higher than Orlando or Tampa, and there’s a reason: Palm Beach County codes demand more fasteners, more sealant, more inspection stops, and installers who actually understand wind-load calculations. A crew that undercuts the labor rate is usually skipping one of those.
In our experience, labor breaks into three tiers:
- Standard retrofit: $150 to $250 per window. Existing frame is sound, new sash goes in, trim stays.
- Full-frame replacement: $300 to $550 per window. Old frame comes out, new buck and flashing go in.
- Impact-rated full replacement: $500 to $900 per window. Heavier glass, more anchoring, more sealant, more time per opening.
Doors run higher because of the weight. A sliding glass door with impact laminated glass can weigh 300 pounds or more. Setting it level and square takes two or three people who know what they’re doing. Entry door labor alone ranges from $600 to $1,800 depending on whether the jamb needs rebuilding.
Material Costs: Frame by Frame, Glass by Glass
Window and door material pricing in 2026 has settled into predictable bands, but the range is wide. What you pay depends less on the manufacturer name and more on the glass package and frame engineering. Here’s what we quote from, side by side on paper, every time:
- Aluminum frame, single-hung, non-impact: $350 to $650 per window. Acceptable for inland homes, wrong for coastal exposure.
- Vinyl frame, double-hung, non-impact: $400 to $800 per window. Decent thermal performance, but vinyl softens under direct Palm Beach sun over time.
- Aluminum frame, impact-rated, single-hung: $700 to $1,200 per window. The baseline for most Palm Beach replacements.
- Vinyl or hybrid frame, impact-rated, double-hung: $800 to $1,400 per window. Better energy numbers, still code-compliant for wind.
- Premium lines (ES Windows, ECO Window Systems, ViewLux): $1,200 to $2,500 per window. Tighter tolerances, better hardware, longer warranties that actually get honored.
- Entry door, fiberglass, impact-rated: $1,800 to $4,500 door only. Add hardware, finish, and install.
- Entry door, solid wood or wrought iron double: $5,000 to $14,000. Custom work, period.
- Sliding glass door, impact-rated: $2,200 to $6,500 depending on width and panel count.
- French door, impact-rated, double panel: $3,500 to $8,000 installed.
Manufacturer lines we install regularly include CWS, ES Windows, ECO Window Systems, alongside the bigger names homeowners already know. The difference between a $700 window and a $1,400 window is rarely cosmetic. It’s the seal design, the frame reinforcement, the coating on the glass, and what the manufacturer will actually cover when the fog shows up in year six.
Impact Windows and Doors: The Palm Beach Non-Negotiable
If your home sits east of I-95 or within a mile of the Intracoastal, impact-rated windows and doors are not an upgrade. They’re the code. Palm Beach County wind zone requirements mean any replacement opening must meet Miami-Dade or Florida Building Code impact standards, and that drives cost more than any other single factor.
Impact glazing adds $250 to $700 per window over a non-impact equivalent. The glass itself is laminated, like a windshield, with a PVB interlayer that holds the pane together when debris hits it. The frame gets more aluminum, more anchoring points, more sealant. It’s heavier, harder to install, and requires more inspection paperwork.
Here’s the part that matters to a homeowner who plans to stay: the insurance discount. Most Palm Beach carriers offer 20% to 45% wind mitigation credits for documented impact protection. On a $6,000 annual premium, that’s $1,200 to $2,700 back every year. The windows pay for themselves in under a decade in many cases, before you count the avoided cost of plywood, shutters, and the hurricane that rips a non-impact slider out of its track.
When we quote impact windows in Palm Beach, we register both manufacturer warranty layers in writing before the truck leaves the driveway. That matters when a seal fails in year eight and the homeowner discovers the installer never filed the paperwork. It happens more than you’d think.
Installation Scope: When a Simple Swap Becomes a Structural Job
The single biggest cost swing in any window or door project comes from what the installer finds when the old unit comes out. A clean retrofit on a 1990s concrete-block home is straightforward. A 1960s house with wood framing, termite damage, or years of water intrusion around the rough opening is a different job entirely.
Here’s the progression we walk homeowners through:
- Retrofit replacement: The new window fits into the existing frame. Least expensive, least invasive, code-compliant when the frame is sound. Runs $200 to $400 per opening in labor.
- Full-frame replacement with new buck: The old frame comes out, the rough opening gets inspected, new pressure-treated buck goes in. $400 to $700 per opening in labor.
- Full-frame replacement with structural repair: Rotted sill, cracked concrete, termite damage around the opening. Now you’re into carpentry and masonry, $800 to $1,500 per opening before the window goes in.
- Opening resize or new opening: Changing a window to a door, widening a slider, adding a new opening. $2,000 to $8,000 plus the unit, plus engineering, plus permits.
Any honest Palm Beach window contractor writes the quote so the homeowner sees this breakdown. A bid that says “replacement window, installed: $1,200” with no mention of the opening condition is a bid that will change once the wall is open. We quote fixed numbers because the homeowner deserves to know the price before we touch the wall, not after.
Permits, Code, and Paperwork Costs
Palm Beach County pulls permits on window and door replacements. No legitimate contractor skips this, and any contractor who suggests skipping it is telling you something about how they handle the rest of the job. Permit fees for window and door work run $150 to $600 depending on the scope and the municipality. Unincorporated Palm Beach County, West Palm Beach, Boca Raton, and Delray Beach each have their own fee schedule.
The permit also triggers inspections. That’s not a nuisance; it’s the mechanism that proves the work was done to code and keeps your insurance valid. When impact windows are installed without a permit and inspection, the wind mitigation credit doesn’t apply. Homeowners who skipped the permit to save $400 then lose $1,500 a year in insurance discounts have made a very expensive decision. In our experience, the paperwork is part of the job. The Keystone Standard means both warranty layers are registered in writing and the permit is closed before we consider the work finished.
The Hidden Costs No Website Quote Includes
National cost guides tell you the window price and the install labor. They leave out the line items that show up on a real Palm Beach invoice:
- Disposal fees: Old windows, old doors, construction debris. $100 to $400 depending on volume.
- Flashing and sealant: Proper coastal flashing costs $50 to $150 per opening. Cheap caulk fails in three seasons of salt and sun.
- Interior trim repair or replacement: $40 to $120 per window when the old trim can’t be salvaged.
- Shutter or hurricane panel removal and reinstallation: $75 to $250 per opening if you have them.
- Stucco or drywall patching: $100 to $500 depending on the opening condition.
- Lead paint protocol: Homes built before 1978 in Palm Beach may require containment. $300 to $1,000 per project.
These aren’t surprise add-ons designed to pad the bill. They’re the real cost of doing the job right on a coastal structure. A quote that omits them isn’t cheaper; it’s incomplete. When we hand a homeowner a written estimate, every one of these is on the paper before they sign anything. No surprises on the bill is not a slogan here. It’s how the numbers work.
Why DIY Is a Losing Bet on Coastal Windows and Doors
A homeowner can buy a replacement window at a big-box store for $250 and watch a video on how to install it. On an inland home with vinyl siding and no wind code, that might work. On a Palm Beach concrete-block home that has to pass a wind-load inspection, it doesn’t.
Here’s what goes wrong. The rough opening isn’t square, so the window binds. The anchor spacing doesn’t meet Miami-Dade fastener schedules, so the inspector fails it. The flashing gets installed backward, so the first driving rain wicks water into the wall. The window isn’t impact-rated, so the insurance company denies the wind mitigation credit. The homeowner is now out the $250 window, the $150 in materials, and the $500 a contractor charges to undo and redo the work properly.
We see this every year in neighborhoods like El Cid, Flamingo Park, and Northwood. A homeowner with a cordless drill and good intentions installs a window, fails the inspection, and calls us to fix it. The repair costs more than the original install would have because now we’re removing something and correcting what was done wrong. For windows and doors, the labor isn’t a tax; it’s the warranty, the inspection, and the job holding up in a Category 3 storm.
How to Budget for a 2026 Replacement
Start with a per-opening number, not a whole-house guess. Count every window and door you want replaced, multiply by the ranges above, add 10% for the line items nobody plans for, and you’ll have a real budget. Here’s the step-by-step version:
- Count openings: Every window, every door, including sliders and transoms.
- Set a material tier: Non-impact aluminum, impact aluminum, or premium impact. Be honest about your wind zone.
- Multiply per opening: Use $700 to $1,600 for mid-range impact windows, $1,200 to $2,500 for premium lines.
- Add labor: $300 to $700 per window, $600 to $1,800 per door.
- Add permits and fees: $300 to $800 per project.
- Add 10% contingency: Rotted framing, hidden water damage, trim that won’t survive removal.
- Subtract insurance savings: Documented impact protection cuts wind premiums 20% to 45% in most Palm Beach policies.
For context, a 12-opening replacement with mid-range impact windows and one sliding door on a 2,200-square-foot home in West Palm Beach will land between $16,000 and $28,000 all-in. That’s the real 2026 number. Anyone quoting $8,000 for the same scope is either quoting non-impact glass or planning to change the price once the wall is open. The TruePane Windows & Doors home overview walks through what a written estimate should include, line by line.
Common Mistakes to Avoid
- Pricing a non-impact window against an impact bid. You’re comparing a Honda to a heavy cruiser. Palm Beach code will force the impact upgrade, and the cheap bid isn’t real until it is.
- Skipping the permit to save a few hundred dollars. An unpermitted window replacement voids the wind mitigation credit, flaps open a code enforcement risk when you sell, and tells your insurance company what they need to know to deny a claim.
- Waiting until the window fails completely. A fogged seal or a binding track can sometimes be repaired for $200 to $500. Once water gets into the frame and the rough opening rots, it’s a four-figure fix.
- Choosing the contractor with the lowest labor number. Underpriced labor in this market comes from somewhere: no insurance, no permit, no warranty registration, or a crew that rushes. None of those save money in the end.
- Ignoring the warranty registration requirement. Most manufacturer warranties in Florida require the installer to register the product within 30 to 90 days. Unregistered, the warranty is void. Homeowners lose this coverage constantly because nobody told them it mattered.
- Replacing windows without addressing the door that leaks in July. The air and water intrusion don’t care about the project scope. If the door binds in summer humidity, fix it in the same job and pay once for mobilization and permits.
When to Call a Professional
A window or door replacement in Palm Beach is not a handyman job. If the opening shows any sign of water staining, if the unit is impact-rated or should be, if a permit is required in your municipality, or if the frame doesn’t match the manufacturer’s installation specs, call someone who does this every day. Same if the old window was installed without a permit and you want the insurance discount documented properly. TruePane Windows & Doors offers free estimates in Palm Beach. Call (850) 801-5596 and a live person answers. We’ll walk the house, measure every opening twice, and hand you a written line-item quote with both warranty layers registered before the work starts.
Frequently Asked Questions
A full-home window replacement in Palm Beach typically runs $12,000 to $38,000 in 2026, with mid-range impact-rated windows at $900 to $1,600 per opening installed. The spread reflects wind zone requirements, frame material, glass package, and opening condition. Call (850) 801-5596 for a free estimate with exact numbers for your house.
Yes, for most of Palm Beach County. Homes east of I-95 and within a mile of the Intracoastal must meet Miami-Dade or Florida Building Code impact standards on any replacement opening. Even inland homes benefit from impact-rated glass through insurance wind mitigation credits, which typically run 20% to 45% of the premium.
The Keystone Standard is our written commitment that both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves the driveway. Most homeowners don’t know their warranty required registration, and most installers don’t tell them. We don’t leave that to chance.
Most standard replacements run 2 to 5 days for a full home, with each window taking 45 to 90 minutes once the opening is prepped. Impact-rated units and structural repairs extend the timeline. The permit inspection adds a few days on the back end. We’ll give you a schedule in writing before work starts and we’ll be there when we say.
Not with us. Our quotes are fixed, line-item, and written. If we find hidden damage when the old window comes out, we stop, show you the problem, and get your sign-off on the additional scope before proceeding. The price on the paper is the price on the bill unless you approve a change.
Yes. We pull the permit, schedule the inspection, and close the permit before we consider the job finished. The homeowner keeps a documented, inspected installation on file for insurance and resale. That’s part of the square deal we’ve been offering since 2008 across the community.
The Bottom Line
Palm Beach windows and doors cost what they cost because the wind, salt, and code demand it. A real 2026 budget accounts for impact glass, structural unknowns, permits, and warranty registration, not just the sticker price on a window. The cheapest bid in this market is usually the most expensive one by year three. The work that lasts comes from a company that registers the warranties in writing, pulls the permits, stands behind the install, and still answers the phone when you call with a question. That’s the only kind of work we do. Dale Kessler built the company on that rule, and it’s never changed: if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After