Simonton Sliding & Patio Doors Nationwide | TruePane Windows & Doors

Simonton Sliding & Patio Doors: The Palm Beach Owner’s Guide

We stock and install Simonton-compatible sliding and patio door rollers, handles, locks, and weatherstripping across Palm Beach. A typical roller or handle replacement runs $185 to $340 installed, with most jobs completed in a single visit because we keep the common failure parts on the truck. Palm Beach homeowners usually discover the problem the same way every time: the door starts dragging like it’s gained forty pounds, the latch won’t catch without a shoulder behind it, or the handle spins loose in your hand. The good news is these are almost never full-door replacements. The better news is that a Simonton door with the right parts set square will slide with two fingers for another decade.

Call (850) 801-5596

Which Simonton Models This Applies To

This covers the Simonton sliding patio door lines most commonly installed across Palm Beach County over the past 25 years: the DaylightMax 7300 and 6500 series, the Impressions 7500 and 7600 series, the Reflections 5050 and 5500 series, and the older ProFinish builder-grade sliders you’ll still find in a good number of 1990s-era homes west of Dixie Highway. Simonton’s sliding hardware is not universal across those lines, and that’s the first place a parts match goes wrong. A 7300 tandem roller assembly has a different housing depth than the 5500 roller, even though both look nearly identical in a photo. We match by the stamped series number on the door’s corner label, the roller housing width, and the wheel diameter measured in millimeters. If the label has faded off after twenty Florida summers, we measure the roller channel and verify against the manufacturer’s series chart.

On OEM versus aftermarket: for rollers and latches, the Simonton OEM parts are generally worth the price. The aftermarket equivalents can work, but the nylon wheels in the cheaper versions tend to flatten in Palm Beach humidity and salt air within three to five years. For exterior weatherstripping that bakes in direct sun, we typically recommend the aftermarket silicone-bulb replacement over the original felt pile, because the silicone holds its shape longer against a west-facing exposure. TruePane is an independent service provider, not affiliated with Simonton. We also stock sliding door parts for Andersen, and Pella when a mixed house needs more than one line addressed.

Signs Your Simonton Sliding & Patio Doors Is Failing

• The door drags or takes real effort to slide. That’s almost always a flattened or cracked roller wheel, or a roller housing packed with sand and shell grit that works its way into the track in Palm Beach. The rollers are doing more grinding than rolling.
• The handle turns but the latch won’t engage. Simonton’s mortise latch uses a spring-loaded hook that eventually loses tension, or the keep (the receiving plate on the jamb) has shifted out of alignment after years of thermal movement.
• The door won’t stay locked or the key cylinder spins. The internal cam that drives the locking bar strips over time, especially on doors that get locked and unlocked daily facing the intracoastal breeze.
• Air or water seeps at the meeting stile. The interlocking weatherstripping at the center where the two panels meet compresses permanently after years of sun exposure on the south and west sides of Palm Beach homes.
• The door pops or clicks when you slide it. A flat spot on one roller wheel makes the panel ride uneven, so you’ll hear and feel that rhythmic bump every two feet of travel.

Replacement Cost & What’s Included

Installed roller replacement on a Simonton sliding door runs $185 to $260 per panel in Palm Beach. A new handle and latch assembly runs $195 to $285. Full weatherstripping replacement on all four sides runs $160 to $220. If the door needs all of it done at once, we’ll quote it as one line item with one labor charge, not three separate visits.

The spread depends mainly on which Simonton series you have and whether the track itself needs to be cleaned out and re-set. Every quote includes the part, the labor, the adjustment so the panel sits square in the frame, and a written 90-day workmanship warranty through our Done Right Promise. The manufacturer’s part warranty gets registered in writing before we leave the driveway. That’s The Keystone Standard we’ve kept since 2008. No surprise line items on the bill. If the pane is not true, the job is not done.

One thing worth knowing about Palm Beach and sliding doors: the salt air and the humidity together age hardware faster than inland climates. A roller that lasts twelve years in Orlando will often show real wear at eight or nine years on a house a few blocks off the water. That’s just the environment doing what it does.

DIY or Call Us?

You can lubricate the track yourself. You can vacuum out the track channel and wipe the rollers down with a dry cloth. You should not attempt to pop the sliding panel off its track without a second pair of hands and the right lift technique: a Simonton sliding panel can weigh 140 to 190 pounds, and if it comes off the track wrong it will take a window, a wall, or a person down with it. The panel has to come out to replace the rollers, and it has to go back in sitting level and square against the interlock. If it’s off by a quarter inch, the latch won’t engage and you’ve still got the same problem wearing different clothes. This is the kind of repair we’d rather do for you than watch you fight for three hours and then call us anyway, tired and frustrated. Call (850) 801-5596 and a live person will answer. It’s a square deal.

FAQs