Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Custom Windows & Doors in Palm Beach: What to Know First
We install, replace, and service Andersen custom windows and doors throughout Palm Beach as an independent Andersen service provider, not a franchise or a manufacturer call center. Typical turnaround on a custom Andersen window or door job runs five to ten business days once we’ve taken final measurements and ordered materials, with most standard repairs completed in a single visit. Pricing reflects what you’re actually buying: a window or door that will hold up through Palm Beach salt air and hurricane season without fogging, binding, or leaking, backed by The Keystone Standard and our Done Right Promise in writing.
This page is written for the homeowner who owns Andersen windows or doors and needs a straight answer on custom shapes, replacement parts, or a full replacement. If you’re in Palm Beach, West Palm Beach, Lake Worth, or anywhere else in Palm Beach County, call (850) 801-5596 and a live person will answer, day or night.
How Andersen Products Fail - and How We Fix Them
- Andersen 400 Series casement and awning windows: rotted sash frames from failed exterior cladding. The vinyl cladding on 400 Series windows does a fine job until a seal crack lets Palm Beach humidity and rain find the wood underneath. By the time a homeowner notices the frame feels soft at the corner, the rot has usually traveled into the sash joinery. We pull the sash, cut out the rot, rebuild the frame with wood filler rated for exterior exposure, and reseal the cladding so it sheds water the way it did from the factory.
- Andersen Frenchwood hinged patio doors: sagging panels that bind at the strike plate. Frenchwood doors are heavy, and over years of Palm Beach heat cycles the hinge screws in the jamb loose just enough that the panel drops a quarter inch. The door won’t latch, or you have to lift the handle to get it to catch. We reset the hinges, shim the panel square, and replace the weatherstripping so the door closes on the first try, every time. The alternative, leaving it out of square, wears the hardware and the panel edge until the fix costs twice as much.
- Andersen Narroline double-hungs: fogged insulated glass and worn balance springs. The Narroline has been in Florida homes for decades, and its two most common complaints are a sash that won’t stay up and glass that looks like a fogged mirror. The failed seal on an Andersen insulated glass unit is not a repair, it’s a replacement, and we install factory-spec glass rather than aftermarket units that don’t match the frame. The balance springs are a separate job but often done in the same visit. In Palm Beach where springtime humidity runs 80 percent or more, a fogged Andersen sash isn’t cosmetic, it’s a failed thermal barrier.
- Andersen A-Series windows and doors: oversized custom units that twist if the rough opening isn’t dead level. The A-Series line is popular in Palm Beach for custom trapezoids, half-rounds, and oversized glass walls on new construction. The issue we walk into regularly is not the window, it’s the opening. A builder set the rough opening half an inch out across a sixteen-foot span and the Andersen unit, which is stiff and precise, gets pulled out of square when the fasteners go in. We don’t just replace the unit; we correct the opening, flash it for Florida storm code, and set the window so the reveal is even on all four sides.
- Andersen 200 Series gliding patio doors: worn rollers and tracks that catch windblown sand. Coastal Palm Beach means fine sand gets pushed into sliding door tracks, grinding against the rollers until the door sounds like a garbage disposal and refuses to glide. We don’t spray lubricant and call it done. We pull the panel, clean or replace the rollers, align the track, and set the door so it rolls with two fingers of pressure. If the frame is right and the glass is rated, the rest is just following through.
Our Andersen Custom Windows & Doors Process
- 1
Measure twice, on paper. Every Andersen job begins with verified measurements of the existing opening and the existing unit. We measure the frame, the reveal, and the diagonal to catch an out-of-square opening before it becomes a problem.
- 2
Diagnose the real cause. A window that won’t close is rarely just a latch problem. We trace the symptom back to the frame, the balance system, the weatherstripping, or the installation that started the trouble.
- 3
Quote side by side. If this is a replacement, we put the Andersen option and the competing options, including Pella, PGT, CGI, on paper with line-item pricing. You see exactly what you’re paying for and what the warranty covers before you commit.
- 4
OEM or quality aftermarket parts, decided transparently. For Andersen jobs, we use Andersen factory parts wherever the warranty depends on it. Where an aftermarket replacement makes sense, we tell you and price it accordingly.
- 5
Install, test, and register warranties. The install includes full operation testing under load and pressure. Before we leave the driveway, both manufacturer warranty layers are registered in writing with durations stated, as required by The Keystone Standard.
- 6
Done Right Promise. If anything isn’t done right after the job, we make it right. No paperwork, no arguing, no fine print.
What Andersen Custom Windows & Doors Costs in Palm Beach
Andersen custom window and door work in Palm Beach tends to cost what it costs for a reason: the units are precise, the climate is unforgiving, and parts are not interchangeable across every series the way they are with some other brands. Here is what we typically see on straightforward Andersen jobs:
| Job Type | Typical Range in Palm Beach |
|---|---|
| Andersen double-hung glass replacement (fogged seal) | $340 - $620 per sash |
| Andersen balance spring replacement (Narroline or 400 Series) | $180 - $310 per window |
| Andersen Frenchwood patio door realignment (no parts) | $290 - $510 |
| Andersen patio door roller replacement | $220 - $400 per panel |
| Custom Andersen window replacement (A-Series, full unit) | $1,650 - $3,900 installed, depending on size and glass package |
| Custom Andersen door replacement (Frenchwood or 200 Series gliding) | $3,200 - $7,500 installed |
What moves the price: glass package (impact-rated versus standard), custom shapes, second-story access, and whether the opening itself needs correction before the unit goes in. Every estimate is a written, line-item quote with no surprise additions. Call (850) 801-5596 to schedule your free estimate.
Why Palm Beach Homeowners Call TruePane Windows & Doors for Andersen Work
We’ve been doing this since 2008, and the reason homeowners in Palm Beach keep our number on the fridge is not complicated. We show up when we say we will. A background-checked, uniformed technician does the work, not a subcontractor we’ve never met. We know Andersen windows and doors well enough to spot the difference between a failed seal and a bad install, because we’ve done both and fixed both. When a brand-new Andersen unit is not the right fit for the house, we’ll tell you and quote a PGT, CGI, Pella, or ViewLux alternative side by side on the same piece of paper. And when the job is done, our Done Right Promise means what it says: if the pane is not true, the job is not done.
FAQs
No. Using an independent Andersen service provider like us does not void the manufacturer warranty, provided the work uses Andersen factory parts where the warranty requires them and is performed to the manufacturer’s installation specifications. We register both warranty layers in writing on every job, with durations stated, before we leave the driveway.
Custom Andersen units typically arrive in five to ten business days after we order them, depending on the series and glass package. We’ll give you a firm timeline when you approve the quote. Call (850) 801-5596 and we’ll walk you through exactly what to expect for your project.
Repair is almost always the right call when the glass is intact and the frame is structurally sound, because the Andersen units installed in Palm Beach homes twenty or thirty years ago were built better than most of what’s sold today. We recommend replacement when a window has rotted framing, repeated seal failures, or such severe corrosion that a repair would outstrip the value of the unit.
Yes. Andersen has a long product history in South Florida, and we regularly source parts for series that have been out of production for years. If we can’t get a factory part, we’ll tell you plainly and offer a quality aftermarket option or a replacement recommendation that doesn’t waste your money.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.