Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Window Installation in Palm Beach: What to Know First
TruePane Windows & Doors provides independent Andersen window installation throughout Palm Beach, FL, for homeowners who want the job set square the first time. Most Andersen installations run one to two days depending on the number of openings and the condition of the existing frames, and we quote a fixed price before any work begins, not an estimate that drifts. If you own an Andersen product and are weighing installation or replacement, call us at (850) 801-5596 and we’ll talk through what you have, what it needs, and what it will cost in plain numbers.
How Andersen Products Fail, and How We Fix Them
Andersen builds a solid window, but after a decade or two in Palm Beach’s salt air and July humidity, specific problems show up. These are the ones we see most often on installation jobs, and they are rarely as simple as the homeowner assumes.
- Sticking sashes on 200 Series Narroline double-hungs. The vinyl cladding on the 200 Series is built for northern winters, not ten months of Florida sun. When the frame swells in humidity, the sash binds in the track. We pull the sash, plane or shim the frame to true, replace worn balancers as needed, and reset the weatherstrip. Many installers just lube the track and call it done, which lasts about one season.
- Roller failures on 400 Series Frenchwood gliding doors. The factory rollers on the 400 Series are sealed units, and when they go, the door starts dragging and scraping the track. Homeowners often assume the door is warped. Nine times out of ten it’s a collapsed roller. We install quality aftermarket stainless rollers, or OEM if the customer wants factory parts, and test the door with the full weight of the panel before we clean up.
- Fogged glass on 200 Series fixed units. When the thermal seal fails, the glass fogs and the only real fix is replacement glass. For a fixed or picture window, an IGU swap is often the better call than replacing the whole frame. We measure, order the correct low-E or standard IGU, install it with fresh glazing gaskets, and register the warranty in writing before we leave.
- Rot at the sill on A-Series casements. The A-Series is Andersen’s architectural line, wood interiors. In Palm Beach, a casement that was never properly flashed at the exterior sill will eventually rot from rain blowback. We cut out the rot, treat the surrounding wood, install a new sill horn or full sill section, and reflash the opening to shed water, not collect it. This is the one repair where a cheaper bid usually means the rot comes back.
- Hardware fatigue on 100 Series single-hungs. The 100 Series is Andersen’s entry line, composite frames, with a flat, snap-in hardware package. The lock points and lifts wear. We replace them with factory hardware when customers want Andersen spec, or with a heavier aftermarket set that holds up longer in a house where the windows are opened daily.
Our Andersen Window Installation Process
Every Andersen installation at TruePane follows the same sequence. It’s not fancy. It’s thorough.
- 1
We measure every opening twice. Not once. Twice. The second measurement catches what the first one missed. Dale Kessler trained at Palm Beach State College, where the shop instructors were particular about tolerances, and that habit has never left us.
- 2
We give you a written quote on paper. You see the line items: the window or part, the labor, any trim work, disposal. No allowances for “unforeseen conditions” unless we tell you the specific condition we foresee.
- 3
We decide parts with you. For Andersen work, OEM parts keep the manufacturer warranty path clean. Quality aftermarket parts cost less and are often just as good or better for specific components like rollers. We lay out both options, prices included, and we do what you tell us.
- 4
We set the window square and level. Shims, sealant depth, frame anchors. If the frame is right and the glass is rated, the rest is just following through. If the pane is not true, the job is not done.
- 5
We test the operation. We open, close, lock, and inspect every installed window before we consider the job complete.
- 6
We register both warranty layers in writing. The Keystone Standard: both manufacturer warranty layers registered in writing, with durations stated, before the truck leaves the driveway. No paperwork fights, no arguing.
What Andersen Window Installation Costs in Palm Beach
Straight numbers, because that’s what you asked for. A single Andersen window installation in Palm Beach, with the existing frame in sound condition, typically runs $800 to $1,800. A full-house Andersen installation job of ten or more windows runs $12,000 to $30,000 depending on series, sizing, glass package, and frame work. These are installed prices on our trucks, not a national average pulled from a website.
You can view our pricing as a table here:
- Single Andersen replacement window (100 Series or 200 Series), standard size: $800-$1,500 installed, frame work extra.
- Single Andersen A-Series casement or awning, architectural line: $1,400-$2,400 installed, depending on size and glass.
- Andersen Frenchwood gliding door roller replacement (parts and labor): $220-$380 per door.
- Full IGU replacement in a 200 Series fixed window: $450-$850, depending on glass package and dimensions.
- Rot repair at a casement sill before installation: $250-$700, depending on depth and framing.
What moves the price: series, size, glass rating (impact vs. standard), condition of the opening, and how much framing has to come out. Call (850) 801-5596 for a free estimate with a written price. No pressure, no follow-up calls you didn’t ask for.
Why Palm Beach Homeowners Call TruePane Windows & Doors for Andersen Work
We’ve been serving local communities since 2008, and we are a second-generation glazier’s shop, not a franchise playbook. Dale Kessler grew up in El Cid, the stretch west of the Intracoastal in Palm Beach, where his father spent weekends repairing jalousie windows on forty-year-old houses. When you call us, you talk to a person who lives in this county and plans to be here in thirty years. Our techs are background-checked and uniformed. They measure twice, quote manufacturer lines side by side on paper, and respect a customer’s home the way they’d respect their own mother’s. If something isn’t done right, the Done Right Promise means we fix it. No arguing. We also install and service Pella, PGT, CGI, so when you’re comparing windows, we give you an honest comparison, not a sales pitch that bends toward whichever line pays us more.
FAQs
Yes. We install customer-purchased Andersen windows in Palm Beach as long as the units are the correct size for the openings. We verify measurements and inspect the windows before installation, and we state our labor warranty in writing. Call (850) 801-5596 for a site measurement and a free installation quote.
No, installing an Andersen window correctly does not void the manufacturer warranty. The warranty covers the product, not the labor. What voids an Andersen warranty is improper installation that damages the window or frame, which is why we align installs with the manufacturer’s stated specs and register both warranty layers in writing before we leave. If you’re concerned about a specific warranty question, call us; Dale will walk you through what your paperwork says.
That depends on three things: the condition of the frame, the age of the window, and what has failed. If the frame is sound and the failure is a fogged IGU, bad roller, or worn hardware, repair almost always costs less than a full replacement. If the frame is rotten at the sill or the window is a 200 Series unit from the early 1990s with failing vinyl cladding, replacement often makes more long-term sense. We will give you both prices and let you decide. Call (850) 801-5596 for a free estimate on either path.
Most standard Andersen installations are completed in one to two days once the windows or parts are on hand. For a specialty IGU or an out-of-stock 400 Series door roller, the parts lead time usually runs a week to ten days. We schedule the install when the parts are in our shop, not when the parts might arrive. Estimates are free, and the written quote tells you the lead time for your specific job.
Yes. We are an authorized installer for more than a dozen manufacturer lines, but our techs work on 100 Series, 200 Series, 400 Series, and A-Series windows and doors regularly in Palm Beach. We know the series-specific weak points, the OEM part options, and the aftermarket parts that outlast factory parts in this climate. As an independent Andersen service provider, we are not affiliated with or authorized by Andersen, but our work is built on the same standard: if the pane is not true, the job is not done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.