Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Windows & Doors in Palm Beach, FL | TruePane Windows & Doors
We service PGT windows and doors across Palm Beach as Pgt specialists, and the work here runs on different rules than it does ten minutes west. Salt air hits from both the Atlantic and the Intracoastal, and the town’s Architectural Commission reviews most visible changes before a permit gets stamped. That combination means PGT equipment in Palm Beach needs a tech who understands impact ratings and historic review in the same breath. Call (850) 801-5596 and you’ll get a live person, a straight answer on your PGT unit, and a free estimate.
Why Palm Beach Residents Choose Us for PGT Service
Our relationship with PGT goes back years, and it’s rooted in their WinGuard and PremierVue lines specifically. Those are the units we see most on this island, and they’re the ones we know down to the latch geometry and seal tolerances. Dale Kessler grew up west of the Intracoastal in El Cid, where his father spent weekends repairing jalousie windows on houses that had seen forty Florida summers, and he trained at Palm Beach State College when the shop instructors were particular about sealant depth in ways most people would call obsessive. That’s the standard we work to.
We carry OEM PGT balances, latches, and weatherstripping from regional distributors, and we keep common WinGuard hardware on the truck. When we show up in Palm Beach, we’re not reading the unit for the first time from a manual. We’re looking at how the salt has worked on the hinge and whether the interlock is still seating clean. You don’t have to be the manufacturer to know a product cold, and we’d rather answer to you and the town’s historic board than to a warranty department.
Common PGT Windows & Doors Problems We Solve in Palm Beach
- Corrosion at the hinged meeting rail of WinGuard Aluminum casements. Palm Beach sits on a barrier island less than half a mile wide, so your windows take salt spray from the ocean side and the bay side. The meeting rail on older WinGuard aluminum casements is a common failure point, and once it starts binding, the crank assembly works harder and strips.
- Clouded IGUs and seal failure in PremierVue fixed units on oceanfront elevations. Constant thermal cycling plus salt haze breaks down the edge seal on fixed glass faster here than inland. The tell is condensation between the panes with no visible crack anywhere.
- Worn latch mechanisms and sagging sash on older WinGuard single-hungs. Beach-driven wind load is unrelenting, and on mid-island properties where the breeze never stops, original hardware on fifteen-plus-year-old units simply wears out. The sash drops a quarter inch and the latch won’t catch.
- Weatherstripping degradation and air infiltration at the interlock of double-hungs in ground-level rooms. Less than a hundred yards from the surf, the salt gets into the weatherstripping and it loses compression. You’ll feel the draft before you see any visible damage.
- Frozen hinges and salt-etched tracks on east-facing WinGuard casements. The east elevation takes the direct Atlantic wind, and it’s not unusual to find aluminum tracks etched white and a crank that won’t turn on a unit less than a decade old.
PGT Service in Palm Beach: What Local Conditions Mean for Your Equipment
Here’s what no one tells you until you’ve done a few dozen jobs on this island: the Architectural Commission reviews window and door alterations for historic compatibility on top of Florida’s mandatory impact glazing code. So a PGT WinGuard on Worth Avenue or South County Road has to meet Florida Product Approval for wind and missile impact, and it has to look right to a design review board that knows Mizner-era mullion patterns better than most builders do. That means shop-drawn millwork, custom veneer mullions matched to the original sightlines, and glass stops profiled to sit inside the existing arch. It’s not a catalog order. It’s custom fabrication, and it’s a different kind of service call. On Worth Avenue, we’ve seen PGT impact windows pass ARCOM on the first submittal because the mullion match was close enough that the reviewers couldn’t tell the difference. That’s the bar.
PGT Models & Products We Service in Palm Beach
We work on the PGT lines most common on this island: WinGuard Aluminum Impact Casement, WinGuard Vinyl Impact Single-Hung, PremierVue Casement, and PremierVue 5500 Fixed Window. For repairs and parts service, we lead with OEM hardware sourced from regional distributors so your original performance and finish stay intact. When PGT has discontinued a part, like first-gen WinGuard handlesets, we machine or source exact-spec aftermarket marine-grade replacements rather than handing you something that almost fits. On a unit over fifteen years old with multiple failed components or visible frame corrosion, we’ll tell you straight: full frame replacement is usually the cheaper path than piecemeal repair. We don’t push replacement when a $40 latch and a tune-up will do it.
PGT Service Pricing in Palm Beach
| Service | Typical Range |
|---|---|
| Weatherstripping replacement (per sash) | $35-$90 |
| Balance replacement (single-hung) | $45-$110 per window |
| Latch or lock replacement | $30-$80 |
| IGU / glass replacement (PremierVue fixed) | $250-$650 per unit |
| Full casement hinge rebuild | $120-$200 per hinge |
| Full frame replacement (WinGuard impact) | $1,100-$2,800 per opening |
What drives the Palm Beach price: which side of the island you’re on, whether the unit is original to a Mizner-era opening, and whether ARCOM review applies to your project. A free estimate from us includes the parts list, the labor breakdown, and a straight answer on whether repair or replacement makes sense. Call (850) 801-5596 and we’ll put it on paper for you.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Palm Beach
If your casements are visible from the street or water on a contributing or landmarked property, yes, an Architectural Commission review is typically required before the town issues a permit. The work still has to meet Florida Product Approval for impact, but the design has to clear ARCOM first. We handle the millwork drawings, the product approval paperwork, and the submittal as part of the job. Call (850) 801-5596 and we’ll walk you through what your address triggers.
They can if the hardware and finish are specified for it. WinGuard aluminum casements on mid-island Palm Beach take salt from two directions, so we spec marine-grade clear anodize on frames and hinges on those jobs. The glass and laminate are fine; it’s the aluminum and the moving parts that need the upgrade. Our team replaced three WinGuard casements on El Bravo Way in a 1930s Mediterranean Revival, and after we set the new units with marine-grade anodize, the homeowner finally stopped wiping salt spray off the interior sill every morning.
PGT doesn’t keep custom-arch door geometry on the shelf, so an original arched stone surround in Palm Beach means full custom fabrication to match the opening exactly. We field-measure the arch, shop-draw the door to the existing rough opening, and run it through ARCOM design review before the town will even look at a permit. It’s a four-to-eight-week process on the front end. Call (850) 801-5596 for our Door Installation in Palm Beach with a free measure and a straight timeline.
The edge seal on the insulated glass unit has failed, and it doesn’t take a crack to cause that. On Palm Beach oceanfront elevations, thermal cycling and salt haze work the seal from the outside until the desiccant inside the unit saturates. The condensation is the symptom; the failed seal is the problem. We replace the IGU, not the whole sash, on most PremierVue fixed units. Call (850) 801-5596 and we’ll confirm the diagnosis on site.
Yes, if you use the right hardware. For original WinGuard single-hungs, the impact rating lives in the laminated glass and the frame’s missile-tested profile, not in the latch or balance. We source OEM PGT replacement hardware to keep the original performance intact. On discontinued hardware, we use exact-spec marine-grade aftermarket pieces. The rating holds; the window operates right.
Service Areas Near Palm Beach
TruePane Windows & Doors serves Palm Beach and the surrounding communities, including PGT service in Lake Worth Beach, PGT service in Westgate, Palm Springs, Palm Beach Shores, and South Palm Beach. If you’re on the island or anywhere within twenty minutes of the bridge, call us and we’ll put you on the schedule. See our Palm Beach service area for full coverage details.
Book Your PGT Service in Palm Beach Today
Call (850) 801-5596 for our Window Installation in Palm Beach with a free estimate on PGT repair, parts, or full replacement. A live person answers, we’ll set a time, and we’ll be there when we say. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach and Palm Beach County since 2008. If the frame is right and the glass is rated, the rest is just following through.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.