Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Energy-Efficient Windows Across Westgate
Energy-efficient window replacement in Westgate typically runs $850 to $1,900 per opening installed, depending on frame material, glass package, and whether the existing rough opening needs reframing for today’s wind-load code. Most of the homes we work on in Westgate were built between 1950 and 1975, and many still carry original single-pane aluminum or jalousie windows that leak conditioned air year-round. TruePane Windows & Doors has been installing and servicing windows across Palm Beach County since Dale Kessler founded the company in 2008, and we know exactly what Westgate’s CBS construction and County permitting workflow require. If you’re pricing a window retrofit and want a straight answer, call (850) 801-5596 and a live person will pick up.
We tell people in Westgate the truth on the first visit: an energy-efficient window that isn’t installed square and sealed correctly is just an expensive hole in the wall. That’s why every job we do here goes through Palm Beach County Building Division permits and inspections, with both warranty layers registered in writing before our truck leaves your driveway. If the pane is not true, the job is not done.
Why TruePane Windows & Doors Is Westgate’s Preferred Energy-Efficient Windows Company
Westgate is an unincorporated Palm Beach County community, and that fact changes how window work gets done. There’s no city permitting desk to walk into. Every retrofit we do here, from a simple Low-E glass swap to a full impact-rated double-pane replacement, runs through the Palm Beach County Building Division. That means inspection scheduling works on the County’s calendar, not a local one, and any contractor who doesn’t build that into their timeline is setting you up for a surprise. We build it in from the first quote. Over the years we have pulled more permits through the County for Westgate homeowners than we can count, and we know which inspectors want to see flashing tape at the sill and which ones check the rough opening dimensions before the window even comes off the truck.
Our crews work in Westgate week in and week out. The homes here are predominantly concrete block construction, which is good news for Florida weather but bad news for retrofits done wrong: those older rough openings were sized for thin aluminum frames, and putting modern insulated units into them without reframing leads to sagging sashes, air leaks at the meeting rail, and U-factor ratings that exist only on the sticker. We measure every opening twice. We quote manufacturer lines side by side on paper. We register both warranty layers before the truck leaves the driveway. And we stand behind every install with our Done Right Promise. If something isn’t right, we make it right. No paperwork fights, no arguing.
Dale Kessler started this company because he was tired of seeing out-of-true installs and voided warranties. That founding rule hasn’t changed: if the pane is not true, the job is not done. Westgate homeowners who have been burned once by a cheap bid and a contractor who never came back tend to call us second. We’d rather be your first call.
Our Energy-Efficient Windows Services in Westgate
Here’s what we actually do in Westgate, and what it means for a house built in 1962 on a concrete block slab:
Double & Triple Pane Windows
Most Westgate homes still have original single-pane aluminum windows that offer almost no insulation. Double-pane units with argon gas fill run $850 to $1,400 per opening installed here, and triple-pane upgrades run $1,300 to $1,900 per opening. On a CBS home, the glass upgrade is only part of the equation. If the original jamb is wallowed or the rough opening wasn’t sized for a modern frame, we reframe it properly before the new window goes in. A triple-pane window in a badly reframed opening is a wasted investment.

Low-E & Argon Gas Glass
Low-E coatings are worth their cost in Westgate. The east-facing windows on homes near the Intracoastal take the morning sun plus the salt breeze, and Low-E glass cuts the solar heat gain while the argon fill slows the heat that tries to pass between the panes. Expect $120 to $260 over standard glass per window for a Low-E argon package. If you’re upgrading glass in existing frames, we check the seal condition first. A Low-E unit with a failed seal is just two panes of dirty glass trapping humidity.

ENERGY STAR Replacement Windows
ENERGY STAR certified windows for Florida’s Southern climate zone come with specific U-factor and Solar Heat Gain Coefficient ratings. Not every energy-efficient window sold in Florida actually meets ENERGY STAR requirements for this zone. We quote the ratings on paper so you can see them. A compliant double-hung ENERGY STAR window in Westgate runs $775 to $1,300 installed. If your current windows are original jalousies, plan for reframing: those louvers were never designed to hold an insulated double-pane sash.

UV-Blocking & Fade Protection
Westgate gets intense afternoon sun, and UV-blocking glass packages slow the fading on furniture, flooring, and anything else facing those west-facing windows. We offer UV-blocking Low-E coatings as part of our glass packages, and for homes where fading is the main complaint, we can quote tinted or solar control glass options side by side with standard Low-E. The cost difference is usually $90 to $180 per window, and it is worth talking through with one of our technicians before you decide.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westgate
TruePane is an authorized installer for more than a dozen manufacturer lines, and in Westgate we work frequently with CWS, ES Windows, and ECO Window Systems products. Each of these lines offers impact-rated and energy-efficient configurations that meet Palm Beach County wind-load requirements without needing Miami-Dade NOA approval, which opens up a broader and often more affordable product tier for Westgate homeowners. We stock common replacement parts for aging aluminum frames that are everywhere in this community, which means faster turnaround when you need a broken louver replaced or a failed seal addressed. We quote manufacturer lines side by side on paper so you see exactly what you are buying, and both warranty layers get registered in writing before the truck leaves your driveway.
Common Energy-Efficient Windows Problems We See in Westgate Homes
- Foggy double-pane glass from seal failure. Westgate’s year-round humidity and the daily thermal swing between hot afternoons and air-conditioned interiors kills seals faster here than in drier climates. Once the seal goes, the argon fill escapes and the window’s insulating value drops sharply. The fix is a new insulated glass unit, not a new frame.
- Sagging sashes on retrofitted double-hungs. We regularly see replacement windows that were squeezed into original 1960s jambs without reinforcement. The sash sags, air leaks at the meeting rail, and the U-factor rating promised on the sticker never materializes. Proper reframing fixes this before the window goes in, not after.
- Corrosion and condensation at the sill flashing. East-facing windows in Westgate catch the sea breeze and the afternoon thunderstorms. When the old aluminum frame traps moisture behind the flashing, condensation shows up on the interior sill and rot forms in the concrete block buck. We add flashing tape at the sill and wrap the exterior with new buck framing to stop water before it starts.
- Original jalousie windows with zero wind-borne debris rating. Many Westgate homes still have louvered jalousie units that carry no impact rating at all. They leak air constantly and they do not satisfy what the Florida Building Code requires for wind-load protection in this region. Replacing them with impact-rated double-pane units is the single biggest energy and insurance upgrade you can make in Westgate.
Pricing for Energy-Efficient Windows in Westgate, FL
Here are honest ranges for Westgate’s market, based on the work we’ve actually bid and completed here. A standard double-pane Low-E window with argon fill and a new frame runs $850 to $1,400 per opening installed. Triple-pane configurations run $1,300 to $1,900 per opening. If your home needs reframing because the original rough opening was sized for 1960s aluminum frames, add $200 to $450 per opening for buck work and flashing. Energy audits that include thermal imaging and air-infiltration testing run $150 to $300 for a typical Westgate home, which is often the best money you can spend before quoting a full retrofit. Call (850) 801-5596 to schedule your free estimate. We’ll quote your options on paper, with line items, before you commit to anything.
We Also Serve Cities Near Westgate
TruePane’s crews work throughout central Palm Beach County, and Westgate sits close to several communities we serve regularly. If you’re in Palm Beach, Lake Worth Beach, Palm Springs, or Palm Beach Shores, our Energy-Efficient Windows team can help with the same County permitting knowledge and the same Keystone Standard warranty registration. Read more about Energy-Efficient Windows in Westgate for specifics on local wind-load requirements.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Westgate
Yes, any replacement window installed in Westgate must meet the Florida Building Code wind-load requirements for Palm Beach County’s wind-borne debris region, regardless of whether you’re buying impact-rated or standard energy-efficient windows. The frame and glass assembly must withstand the required design pressure for your home’s location and exposure. The good news for Westgate homeowners is that Palm Beach County does not require Miami-Dade Notice of Acceptance approval, so you have access to a broader and often less expensive product tier than homeowners in Miami-Dade or Broward. Call (850) 801-5596 if you want us to explain what your specific home requires.
Most Westgate homes were built between 1950 and 1975 with rough openings sized for thin single-pane aluminum or jalousie frames. Modern double-pane insulated units are deeper and heavier, so the original opening often isn’t wide enough or square enough to accept them without reframing. Skipping that step is how you end up with sagging sashes, air leaks, and a U-factor that exists only on paper. We’d rather do the buck work right the first time than come back and fix someone else’s shortcut.
Because Westgate is unincorporated, every window and door replacement permit runs through the Palm Beach County Building Division rather than a city building department. The County schedules inspections on its own calendar, and depending on the season, that can add a few days to a couple of weeks to the total timeline. We build that into our quotes from the start, and we pull the permit and schedule the two required inspections before you file anything for your insurance discount. We’ll be there when we say.
In many cases, yes, but the discount comes from documented wind-load compliance, not from the energy rating alone. Florida insurers offer wind mitigation discounts for openings that meet current code, and in Westgate, where the housing stock is older and the insurance market is tight, the annual premium reduction often pays back the retrofit faster than in wealthier neighboring markets. We provide the documentation you need: permit, inspection sign-off, and product approval paperwork. Call (850) 801-5596 for an exact quote and we’ll walk you through what your insurer will ask for.
A Miami-Dade NOA window has been tested and approved under Miami-Dade County’s stricter High-Velocity Hurricane Zone standards. Westgate sits in Palm Beach County’s wind-borne debris region, which does not require NOA approval. Products here still must meet Florida Building Code wind-load ratings, but you are not limited to the Miami-Dade product tier. That means you can often purchase a code-compliant impact-rated window for less money in Westgate than you would pay for a NOA-approved product in Miami-Dade. Both are legitimate. One is unnecessary for your home.
Get Your Free Estimate on Energy-Efficient Windows in Westgate
If you own a Westgate home built before Hurricane Andrew changed the codes, your windows are probably working against you every single afternoon. We’ll measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before our truck leaves your driveway. Call (850) 801-5596 today to schedule your free estimate. A live person answers, 24 hours a day, 7 days a week.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Westgate and central Palm Beach County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After