Geometric & Shaped Windows

Geometric & Shaped Windows in Palm Beach, FL | TruePane Windows & Doors

Geometric and shaped windows are the architectural punctuation marks of a home. A triangle filling a gable, a hexagon anchoring a stairwell, a curved radius window softening a hard corner. In Palm Beach, these shapes appear on everything from 1920s Mediterranean Revival estates to modern Intracoastal builds. The challenge has always been finding shapes that hold up in a hurricane zone. We install impact-rated geometric windows across Palm Beach, manufactured through our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, fabricated to your exact opening and engineered to Florida’s High-Velocity Hurricane Zone code. Call TruePane Windows & Doors at (850) 801-5596 to talk through your project.

Call (850) 801-5596

Product Overview - Geometric & Shaped Windows

Most window manufacturers work in rectangles. Geometric windows break that pattern, and that’s the point. A triangular window over a front door, an octagon in a powder room, a radius-top window in a living room wall. In Palm Beach, where architecture leans heavily on Spanish Colonial, Mediterranean, and Bermuda-inspired forms, these shapes carry a lot of visual weight. They frame views, pull in light from unusual angles, and give a home a custom feel that stock rectangles never will.

What separates an impact-rated geometric window from a decorative one is the engineering behind it. Every triangular, hexagonal, octagonal, and curved configuration we sell is custom-fabricated to your rough opening. The glass is laminated impact glass with a PVB interlayer, the same category of glazing used in our rectangular hurricane windows. The frame, whether aluminum or vinyl, is extruded or fabricated to hold that non-rectangular glass under real wind load. These are not decorative inserts bolted over an existing window. They are full structural units, tested to the same TAS protocols as any other high-velocity hurricane zone product.

We see these windows specified most often in custom homes and substantial renovations in Palm Beach, West Palm Beach, the North End, El Cid, and along South Ocean Boulevard. Architects specify them, builders call us to execute, and homeowners end up with a detail that reads as intentional rather than tacked on. TruePane Windows & Doors handles the fabrication coordination, the NOA documentation, and the installation, so the shape is the only thing you have to think about.

Technical Specifications

Everything below reflects what we order and install for Palm Beach homes. Because these windows are fabricated to order, the real spec conversation starts with your opening dimensions and your wind zone. Here’s the base lineup:

• Frame materials: Aluminum or vinyl, selected for the configuration and exposure. Aluminum carries larger shapes and heavier glass. Vinyl suits smaller accent windows and tighter budgets.
• Maximum size: Custom fabricated to order. Size is governed by your opening, the shape, and the design pressure your wind zone demands.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass. Combinations are common, like an insulated Low-E unit with a laminated impact outer lite.
• Finish options: White, almond, bronze, black, tan. These span our full line, so matching your existing windows is generally straightforward.
• Design pressure: Matched to your wind zone, up to +/-100. Never higher, because over-engineering a small accent window buys you nothing except cost.
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers are issued per configuration. We pull the specific numbers for your window and include them on your quote.

Hurricane & Compliance Performance

Laminated Impact Glass
The glass is two lites bonded by a PVB (polyvinyl butyral) interlayer. Under impact, the glass may crack, but the interlayer holds the broken pieces in the frame. That keeps wind and water out of the house until permanent repairs happen. Every geometric shape we sell in Florida carries this glass as the standard impact option.

Miami-Dade NOA / FL Product Approval
Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers are issued per configuration. This is not a blanket certification; it’s product-number-specific. When you get a quote from us for a triangular or radius window, we include the specific approval numbers matching that unit so your permit package is complete.

FBC / HVHZ Compliance
These windows are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. HVHZ covers Palm Beach County, and it is the strictest wind-borne debris and pressure standard in the state. Any window we install in Palm Beach meets that bar.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact. TAS 202 covers cyclic wind-pressure loading, the repeated push-pull of a hurricane. TAS 203 covers forced-entry resistance. A window that carries HVHZ approval has passed all three. We reference these standards because they are what your building department will look for.

Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100. A window on the leeward side of a single-story home in West Palm Beach does not need the same rating as one facing the ocean on a three-story house on the Palm Beach barrier island. We size the product to the structure, never over-spec to inflate the price.

Energy Performance
Low-E and insulated glass options are available for these shapes. Low-E coatings cut solar heat gain, which matters when you put a west-facing triangle in a Florida wall. Insulated units reduce heat transfer through the glass. Combining Low-E insulated glass with a laminated impact lite gives you thermal performance plus hurricane protection in one shape.

Color & Glass Options

Color choices are white, almond, bronze, black, and tan. Palm Beach aesthetics tend to run two directions. The first is crisp coastal: white or black frames against stucco, clean and modern. The second is warm Mediterranean: almond, tan, or bronze frames that sit quietly against terracotta roofs, coral stone, and barrel tile. We keep samples in the truck, so when we measure your opening, you can hold a finish against the wall before committing.

Glass selection follows function. Clear laminated impact glass is the straightforward choice, the standard for most openings. Tinted glass is helpful on east- and west-facing windows in Palm Beach, where afternoon sun is relentless. Low-E insulated glass adds energy performance and is worth it on larger shapes or windows in air-conditioned rooms. Your choice of glass does not change the impact rating, as long as the laminated lite is in the stack. We will lay out the options by opening so you can balance cost, light, and heat gain across the house.

Installation by TruePane Windows & Doors in Palm Beach

Installation is where a good geometric window becomes a problem or a permanent part of the house. We treat every shaped window as a structural opening, because in an HVHZ jurisdiction like Palm Beach County, that is exactly what it is. Our process starts before the window is fabricated. We measure the rough opening on site, verify the shape with a template when the geometry is curved or unusual, and confirm the design pressure requirement for the specific wall and wind zone before the order goes to the factory.

On install day, we set the frame level, plumb, and square, then fasten it according to the manufacturer’s approved anchoring schedule. The perimeter is sealed with AAMA 812 low-expansion foam, which fills the gap between frame and rough opening without warping the frame. Our installation practice follows AAMA 2400 and 2410 standards, the recognized benchmark for window installation. After the unit is in, we run a final water test where the conditions call for it, then clean the opening and haul the old window away.

Palm Beach properties carry coastal exposure. Salt air, wind-driven rain, and building department scrutiny are all part of the job. We pull the NOA and Florida Product Approval numbers into your permit package, so the plan reviewer sees the right documentation for the exact configuration. Improper installation compromises the entire NOA-rated system. That is not a line on a brochure; it is the difference between a window that holds and a window that becomes a hole in the wall during a storm. That’s why a trained crew matters more than the window sticker.

Frequently Asked Questions - Geometric & Shaped Windows

What wind zone or design pressure is the Geometric & Shaped Windows rated for?
Design pressure is matched to your wind zone, up to +/-100. Your specific unit is fabricated and documented to meet the FBC HVHZ requirement for the exact location on your house. Call (850) 801-5596 and we will confirm the rating for your address before you commit to anything.

What is the lead time for a custom geometric window?
Because every triangular, hexagonal, octagonal, or curved window is fabricated to order, lead times run longer than stock rectangular windows. Expect several weeks from final measurement and template approval. We give you a written production schedule with your quote so the framing and finish work can be sequenced around it.

Does my permit require a Miami-Dade NOA or Florida Product Approval submittal?
Yes, in Palm Beach County and most HVHZ municipalities, your permit package must include the Miami-Dade NOA or Florida Product Approval numbers matching your specific configuration. We provide those numbers with your quote and include them in the submittal documents. Get in touch at (850) 801-5596 if your permit is already in process and you need documentation quickly.

Can I customize the size and configuration?
Yes. The entire point of this product is that it is fabricated to your opening, not picked from a catalog. Triangles, hexagons, octagons, and radius or curved shapes are all built to the dimensions we template on site. If you have an unusual opening, bring us a photo and rough dimensions and we will tell you what is feasible.

How do I maintain the frame and glass?
Wash the glass and frame with mild soap and water, and avoid abrasive cleaners on the finish. Inspect the perimeter seal once a year. The hardware and weep paths on operable geometric windows should stay clear of debris, especially after a storm. Maintenance is simple unless a seal or lite is compromised, at which point you should call us before you try to repair it yourself.

Get a Quote - Geometric & Shaped Windows in Palm Beach

Every geometric window starts with an opening and a measurement. Call TruePane Windows & Doors at (850) 801-5596 to schedule a free on-site measurement. We will template the shape, confirm the design pressure, pull the NOA documentation, and give you a written line-item quote for the window and the installation. Serving Palm Beach and the surrounding coastal communities.

Written by the team at TruePane Windows & Doors, serving Palm Beach, FL with hurricane-impact windows and doors.