Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Shingle, Tile & Metal Roofing in Palm Beach: What to Know First
We repair and replace Therma-Tru shingle, tile, and metal roofing systems throughout Palm Beach as an independent Therma-Tru service provider. Most shingle repairs are completed in one visit; tile and metal jobs, depending on scope, usually run two to three days from tear-off to final inspection. You’ll get a written line-item quote before any work starts, and the price on that quote is the price you pay. If you own a Therma-Tru roof in Palm Beach and you’re weighing repair against replacement, call (850) 801-5596 and we’ll walk you through what we’re seeing on your roof before we ever talk numbers.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds roofing components to a specification, but Palm Beach heat, salt air, and hurricane-season wind loads expose weaknesses that show up differently depending on the line. Here’s what we find most often.
- Therma-Tru Alpine shingle line: granule loss at the eaves. The Alpine series holds up well on the field, but we regularly see premature granule shedding along the first two courses, where Palm Beach’s afternoon downpours hit hardest. The underlying mat stays intact longer than most brands, so homeowners miss the early warning. Our fix is a course-by-course inspection, then replacing only the affected shingles with color-matched stock rather than re-roofing the whole plane.
- Therma-Tru Tuscany tile profile: cracked corner tabs from uplift. Tuscany tile’s interlocking corners are its strength, but under the gusting winds that come across the Intracoastal, the corner tabs can micro-crack without fully separating. Water gets in, sits against the underlayment, and rots the deck before anyone sees a leak. We pull the affected tiles, inspect the underlayment with a moisture meter, and reset or replace as needed, always using new clips, never reusing stretched ones.
- Metal standing-seam systems: fastener back-out at the ridge cap. On Therma-Tru metal roofs, the ridge cap fasteners take the brunt of thermal expansion. Palm Beach swings from 50-degree January mornings to 90-degree August afternoons, and that repeated movement works the fasteners loose. We re-torque the entire ridge line, replace any fasteners with stripped threads, and re-seat the cap with a fresh bead of sealant rated for coastal exposure.
- Flashing failures at dormer transitions. This one isn’t unique to Therma-Tru, but we see it enough on their shingle and tile roofs to call it out. The step flashing where a roof plane meets a dormer wall gets pinched during original installation, and twenty years of expansion and contraction opens a seam. We cut back the existing flashing, install new pre-bent step flashing, and counter-flash properly so the next two decades are someone else’s problem.
- Underlayment delamination on low-slope sections. Palm Beach flat and low-slope roof sections, especially on mid-century homes west of Dixie Highway, see standing water after every summer storm. Therma-Tru underlayments delaminate at the seams when water ponds longer than 48 hours. We identify the ponding areas, correct the slope where possible with tapered insulation, and lay a new peel-and-stick underlayment that can handle intermittent ponding.
Our Therma-Tru Shingle, Tile & Metal Roofing Process
Every Therma-Tru job we run in Palm Beach follows the same sequence. It keeps us honest and keeps you informed.
- 1
Call and schedule. A live person answers at (850) 801-5596, day or night. We set a time that works, and we’re there when we say. Dale Kessler runs the schedule, and he doesn’t double-book.
- 2
Roof assessment. A uniformed, background-checked technician walks the roof, photographs every problem area, and checks the attic side for water staining. You get a written report, not a verbal summary.
- 3
Parts decision. We lay out OEM versus quality aftermarket options side by side on paper, with prices. OEM preserves the Therma-Tru warranty; aftermarket often cuts the cost 20 to 30 percent. You decide, we don’t stack the deck.
- 4
The repair or replacement. Work proceeds in the order agreed. No hidden line items appear. If we open a section and find rot behind it, we stop, show you photos, and give you a revised number before touching anything else.
- 5
Test and verify. We water-test every repaired section, confirm the underlayment is dry, and walk the roof a second time before we call it done. If the frame is right and the glass is rated, the rest is just following through.
- 6
Cleanup and guarantee. We magnet-sweep for nails, haul away debris, and leave the property the way we found it. Then we register any applicable warranty layers in writing and hand you the paperwork. The Done Right Promise covers the workmanship, no fine print.
What Therma-Tru Shingle, Tile & Metal Roofing Costs in Palm Beach
Palm Beach labor rates run higher than inland, and that shows up in every bid. Here are honest ranges for the Therma-Tru work we do most often.
| Job | Typical Range |
|---|---|
| Shingle repair, localized (10-15 shingles) | $350-$700 |
| Tile repair, 1-4 tiles with underlayment patch | $450-$950 |
| Metal roof ridge cap re-secure (full ridge) | $800-$1,600 |
| Flashing replacement at dormer or chimney | $600-$1,400 |
| Full shingle re-roof, average Palm Beach ranch | $9,500-$16,000 |
| Full tile roof replacement | $22,000-$38,000 |
What moves the price: roof pitch, deck condition, how many layers need to come off, and whether you choose OEM Therma-Tru materials or a quality aftermarket line. We offer a permanent 5 percent discount for seniors and veterans, and right now it’s a free written repair estimate. Call (850) 801-5596 for a free estimate, and we’ll put the number in writing before you commit to anything.
Why Palm Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’ve served Palm Beach County since 2008, and Dale Kessler grew up in El Cid, so the salt air and afternoon storms are not new to us. When a Therma-Tru roof needs work, we show up with the right materials, the right training, and the discipline to do it once. The Done Right Promise means if it’s not right, we make it right, no paperwork and no arguing. And because we’re also an authorized installer for PGT, CGI, CWS, and ES Windows, if your roofing project intersects with skylights, dormer windows, or any glass work, we handle the whole thing under one roof. A live person answers the phone 24/7, so you’re never waiting on a callback when a roof is leaking.
FAQs
No. As an independent Therma-Tru service provider, we perform repairs that preserve the manufacturer warranty, provided we use OEM materials where the warranty requires it. We’ll tell you before any work starts whether a specific repair triggers a warranty question, and we’ll put that in writing.
Yes, in most cases. We stock the most common Alpine and Tuscany colors for Palm Beach homes, and for discontinued shades we source from regional distributors who keep older Therma-Tru inventory. If an exact match isn’t available, we’ll show you the closest option and let you decide before we install a single shingle.
We schedule emergency leak calls within 24 hours in most of Palm Beach, and a live person answers the phone when you call (850) 801-5596, day or night. For non-emergency repairs, we can usually get on the roof within three to five business days.
That depends on the age of the roof, the extent of the damage, and whether the decking is compromised. If the roof is under 15 years old and the damage is localized, repair almost always makes more sense. If you’re past 20 years and seeing issues across multiple sections, replacement becomes the smarter money. We’ll give you an honest read, not a sales pitch. Call (850) 801-5596 for a free assessment.
No. We quote a firm line-item price, and we honor it unless we uncover hidden rot or structural damage that changes the scope. If that happens, we stop, show you the problem, and agree on a revised number before proceeding. No surprise line items on the bill, ever. Call (850) 801-5596 to schedule your free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.