Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Roof Replacement & Installation in Palm Beach: What to Know First
Mr-Glass roof replacement and installation in Palm Beach runs $1,850 to $7,400 for most residential jobs, with single-panel skylight replacements starting around $1,850 and full roof-glazing systems reaching the upper end. We’re an independent Mr-Glass service provider, not a manufacturer affiliate, and we typically complete roof glazing replacements in one to two days once measurements are confirmed and panels arrive. The honest price posture is this: we quote the full number up front, parts and labor both, and we don’t pad it after you’ve signed.
If you own a Mr-Glass roof light, skylight, or roof glazing system in Palm Beach and the seal has gone cloudy or water is getting past the flashing, call us at (850) 801-5596. We’ll send a background-checked technician who has worked on Mr-Glass roof systems across Palm Beach County. The estimate is free, and you’ll get it in writing before any work begins.
How Mr-Glass Products Fail - and How We Fix Them
Mr-Glass roof systems have their own failure patterns. Over the years we’ve seen the same handful of problems repeat across Palm Beach homes, and knowing which one you’re dealing with changes the fix and the price.
- Failed edge seals on the SunSeries roof panels. Mr-Glass SunSeries panels use a dual-seal edge construction that holds up well inland but struggles after a decade of Palm Beach salt air and direct UV. The telltale sign is condensation between the panes that never clears, even on dry days. We replace the insulated glass unit, not the whole frame, when the frame is still square and the flashing is intact.
- Stress cracks radiating from the mounting points on the SkylightPro line. We’ve seen this more on homes within a mile of the Intracoastal, where constant expansion and contraction works the mounting holes just enough to start hairline cracks. The fix is re-drilling with proper clearance and installing new gasketed fasteners. A lot of shops will silicone over the crack and call it done. We don’t, because the glass keeps moving and the crack keeps growing.
- Flashing corrosion at the roof transition. Many original Mr-Glass installs in Palm Beach used standard aluminum flashing against the roof membrane. Twenty Florida summers and that flashing pits and lets water walk right under the panel. We replace it with marine-grade aluminum or, on flat roofs, a membrane-compatible boot designed for the specific roofing system on the house.
- Haze and clouding on the ClassicLine domes. Mr-Glass ClassicLine domes were made from an acrylic that hardens and micro-fractures under prolonged UV. Owners notice it as a milky film on the outside that scrubbing won’t touch. We can sometimes polish it if the panel is otherwise sound, but if the acrylic has started to craze, replacement is the only fix that lasts, and we’ll tell you that straight.
- Drainage channel blockage on ventilated roof assemblies. Some Mr-Glass roof glazing assemblies have internal drainage channels meant to carry condensation to weep holes. Palm Beach pollen, oak leaves, and the occasional tropical storm load these channels until they back up and water pools against the interior frame. We flush the channels, clean the weeps, and test with water before we leave. If the channel has collapsed, we quote a replacement rather than pretending a rinse fixed it.
Our Mr-Glass Roof Replacement & Installation Process
Here’s how a Mr-Glass roof job runs when you call TruePane Windows & Doors:
- 1
Call and describe what you’re seeing. A live person answers, 24 hours a day. We’ll ask whether the panel fogs, leaks, or shows cracks, and whether the roof is shingle, tile, or membrane. That tells us which technician to send and what tools to load.
- 2
On-site measurement and diagnosis. We measure every opening twice, check the frame for square, and test the existing flashing. We’ll tell you if the panel needs replacement or if the whole assembly including the curb and flashing has to go.
- 3
Parts decision, on paper. For Mr-Glass systems we can often source OEM panels when they’re still in production. When they’re not, we quote quality aftermarket options side by side on paper, with the price difference and the warranty difference stated in writing.
- 4
Replacement and reset. We pull the old panel, inspect the curb, replace or repair flashing, and set the new panel with fresh sealant and correct gasketing. This is where Palm Beach salt air and monsoon rain matter: we use sealants rated for coastal UV, not whatever’s on the truck.
- 5
Water test and cleanup. Before we call the job done, we run water over the assembly and watch. No drips, no pooling, no half-dried sealant lines. We clean the work area and haul off the old glass.
- 6
Warranty registration before we leave. Both warranty layers get registered in writing, with durations stated, before the truck leaves the driveway. We stand behind the work for 90 days under the Done Right Promise. If it’s not right, we make it right, no paperwork fight and no arguing.
What Mr-Glass Roof Replacement & Installation Costs in Palm Beach
Prices below reflect what we’ve quoted on Mr-Glass roof work in Palm Beach over the past several years, and they match what you should expect from any contractor who is honest about parts and labor. A single SkylightPro panel replacement, glass only with the existing curb reused, lands between $1,850 and $2,600. A full assembly replacement including new curb and flashing for a SunSeries panel runs $3,200 to $4,900. Ventilated roof glazing assemblies with multiple panels start at $5,200 and can reach $7,400 depending on the number of openings and roof access. The biggest price drivers are roof pitch and material, whether the curb can be reused, and OEM versus aftermarket glass. For an exact quote, call (850) 801-5596 and we’ll put numbers on paper, free.
Why Palm Beach Homeowners Call TruePane Windows & Doors for Mr-Glass Work
We’ve been serving Palm Beach and the surrounding communities since 2008 through a heritage started by Dale Kessler in 2008, built on his father’s old jalousie-window weekends in El Cid. We still operate by the rule that names the company: if the pane is not true, the job is not done. We’re an independent Mr-Glass service provider, which means we work for you, not for a manufacturer. Our technicians know Mr-Glass roof systems, and when a Mr-Glass line is no longer worth repairing, we can quote PGT, CGI, CWS, or ES Windows alternatives side by side. A live person answers our phone 24/7, and every job is covered by the Done Right Promise and The Keystone Standard: both warranty layers registered in writing before our truck leaves your driveway. Dale’s signature still holds on roof work: if the frame is right and the glass is rated, the rest is just following through.
FAQs
No. We are an independent Mr-Glass service provider. That means we’re not bound to use only Mr-Glass parts or only the manufacturer’s repair playbook. We can source OEM panels where they exist and honest aftermarket alternatives where they don’t, and we can recommend a different brand like PGT or ES Windows when the math says a Mr-Glass panel isn’t worth saving. Call (850) 801-5596 for a straight answer on your specific roof assembly.
You can often replace just the insulated glass panel when the frame is square and the flashing is intact. But if the flashing has corroded, the curb has sagged, or the drainage channels have collapsed, we’ll tell you the whole assembly needs to go, and we’ll show you why on the roof. Call (850) 801-5596 and we’ll assess it in person.
Once measurements are confirmed, a single-panel replacement usually takes one to two days on site. That assumes the panel is in stock or arrives from the supplier within the week. If you’re dealing with an active leak, call us at (850) 801-5596 and we’ll talk through interim tarping while the panel ships.
No. We quote the full price up front and we don’t add surprise line items to the bill. The only time a change order happens is if we open up the roof and find something hidden, and if that ever happens you’ll see it and approve it in writing before we proceed. That’s a square deal, and we stand behind it.
We register both warranty layers, in writing, with durations stated, before the truck leaves the driveway. If a manufacturer requires owner registration, we fill out your portion and walk you through it so it’s done, not left in an envelope on the counter. Call (850) 801-5596 to schedule your free estimate, and we’ll handle the paperwork. Estimates are free.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.