Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Roof Replacement & Installation in Palm Beach: What to Know First
We replace and install ECO Window Systems roof units for Palm Beach homeowners, typically finishing the job in one to two days depending on how the original frame was set and whether the curb mount needs rebuilding. Pricing runs honest and upfront, which means you’ll see a written line-item quote before any work starts, not after. This page is for ECO Window Systems owners in Palm Beach who need a straight answer about their roof glass, their warranty, and what it costs to make it right. Call (850) 801-5596 and a live person answers, day or night.
How ECO Window Systems Products Fail - and How We Fix Them
ECO Window Systems builds a solid frame, but every manufacturer has weak points that show up after enough Florida heat and salt air. Here’s what we find in Palm Beach homes and what we do about it:
- Skylight curb flashing separation on ECO Classic Series units. Palm Beach gets heavy afternoon thunderstorms, and the thermal cycling between noon heat and sudden downpours works the flashing loose over time. Water doesn’t pour in at first, it seeps, staining the drywall around the shaft. We remove the old sealant, inspect the curb for rot, and reset the flashing with a marine-grade sealant rated for coastal exposure. On most ECO Classic units, the original curb can be saved if it’s caught before the wood goes soft.
- Weep-hole clogging on ECO Skylight Pro models. These units have narrow condensation channels that were designed for drier climates. Palm Beach humidity and wind-driven debris clog them within a few years, and water starts pooling on the interior side of the glass seal. We clear the channels, test the drainage, and where the design allows, we open the weep holes slightly so they don’t clog again after the first summer.
- Glazing gasket shrinkage on ECO Solar Series ventilation units. The rubber gaskets ECO used on certain ventilation skylight runs dry out and pull back from the glass edge. That’s the point where you’ll hear a faint whistle on windy days and notice condensation between panes that shouldn’t be there. We replace the gaskets with a UV-stable compound built for southern exposure. It’s a small part, but it’s the difference between a sealed unit and one that slowly fogs from the edge inward.
- Motor and chain wear on ECO venting roof windows. The crank mechanisms on venting units take a beating in humid, salty air. Palm Beach houses near the Intracoastal see it worst. We source OEM replacement hardware where it’s still available; when ECO has discontinued a line, we use aftermarket mechanisms that match the travel and torque of the original. The unit operates the way it did when it was new, and the warranty on our labor holds regardless of which part goes in.
- Frame corrosion at the mounting flange on older ECO aluminum units. Dormant salt intrusion from Hurricane seasons past leaves pitting that you may not see until the unit is lifted. We inspect the flange before we set any new roof unit. If the metal is thinned, we replace the flange and reseat the frame true to the opening. If the frame is right and the glass is rated, the rest is just following through.
Our ECO Window Systems Roof Replacement & Installation Process
We don’t do shortcuts on a roof opening in Palm Beach, where one wrong flashing detail means a ceiling stain the next time a squall line rolls through. Here’s how a typical ECO Window Systems job runs:
- 1
Call and inspection. A live person takes your call at (850) 801-5596. We schedule a site visit and inspect the unit, the curb, and the surrounding roof deck from both inside and out.
- 2
Measurement and diagnosis. Our technician measures the rough opening twice and confirms the exact ECO model and glass package before anything is ordered or planned.
- 3
Written quote. You get a line-item estimate on paper showing parts, labor, and any roof repair work, with no surprise line items later.
- 4
Removal and curb assessment. We pull the old unit, inspect the curb and flashing, and rebuild any wood or metal that has rotted or thinned.
- 5
Installation and sealing. The new unit is set plumb and level, flashed with coastal-rated sealant, and checked for drainage. We register both warranty layers in writing before the truck leaves the driveway.
- 6
Cleanup and walkthrough. We clean the work area, show you what we did, and leave you with the written warranty registration and our Done Right Promise behind it.
What ECO Window Systems Roof Replacement & Installation Costs in Palm Beach
Palm Beach roof work costs what it costs because the materials have to survive salt air, high UV, and hurricane-code inspections. Here are the ranges we quote most often for ECO Window Systems jobs:
- Fixed skylight unit replacement, standard curb: $1,100 to $1,900 installed.
- Venting roof window replacement with new crank mechanism: $1,600 to $2,600 installed.
- Full curb rebuild with new flashing and deck repair: add $400 to $900 depending on rot extent.
- Glazing gasket replacement on a single unit, no roof work: $250 to $450.
- Motor and hardware replacement for a venting unit: $300 to $600 parts and labor.
What moves the price is the condition of the curb, the pitch of your roof, and whether the unit is on a second story that requires staging. Call (850) 801-5596 for an exact quote on your opening. Estimates are free, and the number you see on the quote is the number on the bill.
Why Palm Beach Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
We’re not the cheapest number in Palm Beach, and we don’t try to be. We’re the company that shows up when we say, measures twice, and stands behind the work in writing. Our technicians are background-checked and uniformed, and they set ECO units the way Dale Kessler learned to set glass: true to the opening, sealed for the climate, and registered for the warranty before we pull out of the driveway. We service PGT, CGI, CWS, and ES Windows alongside ECO, so if you have mixed brands under one roof, one crew handles all of it. And if something isn’t right after we leave, the Done Right Promise means we come back and make it right. No paperwork choreography, no arguing about whose fault it is.
FAQs
As an independent ECO Window Systems service provider, we can diagnose the failure, document it, and walk you through your warranty paperwork, but we’re not a manufacturer-authorized service center. The Keystone Standard means we register what can be registered in writing and put the duration on paper for you. Call (850) 801-5596 and we’ll tell you honestly whether your issue is a warranty matter or a repair matter before any money changes hands.
Availability depends on the model line and whether ECO still lists the part. For discontinued hardware, we use aftermarket replacements that match the original mechanism’s travel and torque. Where OEM parts exist, we use them. We’ll show you the difference on paper before we order. Call (850) 801-5596 and we’ll check your specific model’s parts status.
Most single-unit replacements finish in one day. If the curb needs rebuilding or the roof deck is soft, plan for two days so the sealant has time to cure before the next rain. We’ll tell you the schedule on the first call, and we’ll be there when we say. Call (850) 801-5596 to confirm availability for your opening.
If the frame is still solid and the glass package is intact, a gasket or hardware repair usually makes sense. If the seal has failed between panes or the frame shows corrosion at the flange, replacement is cheaper over the long run than nursing a unit that will keep failing in Palm Beach humidity. We’ll show you the numbers both ways. Call (850) 801-5596 and we’ll give you a straight answer on which path costs less over ten years.
No. The quote we hand you is the price you pay, unless we open the opening and find something no one could have seen from the outside, like rotted decking under the curb. If that happens, we stop, show you what we found, and get your approval in writing before we do anything. No change orders slipped onto the final bill. Call (850) 801-5596 to schedule your free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.