Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Custom & Geometric Windows in Palm Beach: What to Know First
ECO Window Systems custom and geometric windows in Palm Beach typically require a specialist who understands both the brand’s aluminum frame engineering and the realities of salt air, hurricane codes, and oversized openings. TruePane Windows & Doors installs, repairs, and replaces ECO Window Systems custom and geometric windows as an independent service provider, not a manufacturer dealer. Most repairs and replacements are quoted after a site visit so we can measure every opening twice and account for how the original frame has moved over the years. Call (850) 801-5596 for a free estimate on any ECO Window Systems custom or geometric window job in Palm Beach.
This page is for homeowners in Palm Beach who already have ECO Window Systems windows, or who are weighing ECO against other impact-rated lines, and want plain answers about what these windows cost to fix or replace, how the brand holds up in coastal conditions, and what a real specialist does differently on a shaped or oversized opening.
How ECO Window Systems Products Fail, and How We Fix Them
ECO Window Systems builds a solid aluminum frame, but Palm Beach conditions expose specific weaknesses over time. Here is what we see most often on custom and geometric ECO windows:
- Arched and radius frames losing their seal at the apex. The ECO 8500 series arched units rely on bent aluminum with a welded corner at the top of the arc. After twelve to fifteen years of direct afternoon sun, that weld can microfracture and let salt moisture into the glazing channel. The first sign is condensation that appears only in the top quarter of the glass. We re-glaze the opening with fresh structural sealant and, where the extrusion is too fatigued, replace the sash rather than trying to patch a bow that has lost its tolerance.
- Geometric fixed windows bowing under wind load. Triangular and trapezoid ECO Windows System fixed units in Palm Beach homes sometimes flex more than the original install accounted for, especially on second-story gable walls facing the Intracoastal. The fix is not thicker glass alone. It is re-measuring the rough opening, confirming the frame is square to the structure, and resetting the unit with proper backer rod and perimeter sealant so the frame carries the load instead of the glass.
- Single-hung ECO models with worn spiral balances on tall openings. We see this on ECO 6000 single-hung units installed in older Palm Beach ranch homes with nine-foot interior walls. The spiral balance loses tension after years of humidity cycling, and the sash starts to drift or slam. We replace the balance with an OEM-rated spiral or a matched aftermarket unit, and we adjust the sash so it holds at mid-travel without needing a block of wood under it.
- Solar heat gain coating failing early on west-facing shaped glass. ECO’s standard low-E coating performs fine on flat, shaded glass, but Palm Beach sun coming off the water hits west-facing arched windows harder than most people expect. The telltale is a faint bronze film that starts to ripple at the glass edge after eight to ten years. We order replacement IGUs with a heavier low-E stack rated for high solar exposure, which ECO’s coastal warranty documents support when registered properly.
- Mullion joints pulling apart on oversized custom assemblies. When three or more ECO windows are mulled together to frame a Palm Beach living room view, the joints between units can pull apart a few millimeters over time. You feel it as a draft at the seam or see daylight through the corner. We disassemble the mull, reset each unit, and rebind the joints with fresh structural gaskets so the assembly reads as one opening again.
Dale Kessler grew up in El Cid, west of the Intracoastal, and has spent two decades measuring, setting, and servicing windows across Palm Beach County. His wife still kids him that he inspects every frame he walks past, whether it belongs to a client or a restaurant on Worth Avenue. If the frame is right and the glass is rated, the rest is just following through.
Our ECO Window Systems Custom & Geometric Windows Process
Every ECO Window Systems job on a custom or geometric opening follows the same sequence. It is not fast, and that is the point.
- 1
Call and schedule. A live person answers at (850) 801-5596. We set a site visit time and show up when we say we will. No call center, no window of “sometime between eight and four.”
- 2
Measure and diagnose. We measure every opening twice. On a radius or angled frame, we check the actual extrusion against the manufacturer’s original tolerance. Most problems on shaped windows are not the glass. They are the frame, the sealant, or the way the unit was set years ago.
- 3
Parts decision on paper. Where ECO Window Systems OEM components are available and current, we quote them. Where lead times run twelve to sixteen weeks, we will show you a matched aftermarket option side by side on the same estimate so you can decide with facts, not hope. We do not substitute parts silently.
- 4
Repair or replacement. We set or reset the unit, re-glaze or replace IGUs as needed, and check that every mull joint and perimeter seal is doing its job. On impact-rated custom openings, we confirm the glass stamp and frame rating before the unit goes in.
- 5
Test and document. We test the seal, the operation, and the square of the frame before we load the truck. Both manufacturer warranty layers get registered in writing, with durations stated, before we leave the driveway.
- 6
You keep the paperwork. A written line-item quote, warranty registration, and a clear description of what we did. The Done Right Promise covers the workmanship. No fine print that covers neither.
What ECO Window Systems Custom & Geometric Windows Costs in Palm Beach
Here are honest ranges for common ECO Window Systems custom and geometric window work in Palm Beach, based on what we have quoted and completed in this market:
- Arched or radius window re-glaze with new structural sealant: $450-$950 per opening, depending on size and ladder access.
- Replacement IGU for a shaped fixed window (triangle, trapezoid, arch): $800-$1,900. Custom shapes cost more because the glass is cut and tempered to match the exact frame, not pulled from a shelf.
- Full custom geometric window replacement, impact-rated: $2,400-$6,800 per opening for most residential sizes. Oversized or second-story gable units run higher.
- Mull joint rebuild on a multi-unit ECO assembly: $600-$1,400 depending on the number of units.
- Spiral balance or hardware replacement on an ECO single-hung: $225-$480 per sash.
What moves the price is access, glass rating, and whether the frame itself is still true. Second-story shaped windows with southern exposure cost more to service safely than a ground-floor arch. If the existing frame is fatigued, patching it will fail again. We tell you that before you spend a dollar. Call (850) 801-5596 for a free estimate on your specific opening.
Why Palm Beach Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
We are not the cheapest bid on ECO Window Systems custom and geometric windows in Palm Beach, and we do not try to be. We are the last call a homeowner needs to make. Every job carries the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. If it is not done right, we make it right. No paperwork, no arguing.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper. And when a Palm Beach homeowner has an ECO unit that cannot be saved economically, we can show them comparable custom and geometric options from PGT, CGI, CWS, or ES Windows, because we are authorized installers for more than a dozen lines and we are not married to any one brand. We are married to doing the job right.
FAQs
Most arched ECO Window Systems windows in Palm Beach can be repaired by re-glazing the frame and replacing the IGU, provided the aluminum extrusion has not fatigued at the weld. We assess that on-site before quoting. If the frame is still true, repair costs roughly one-third to one-half of full replacement. Call (850) 801-5596 and we will tell you straight.
We quote OEM ECO Window Systems parts when they are available and priced reasonably. When lead times stretch beyond twelve weeks, we also quote a matched aftermarket option on the same estimate so you can compare. We never substitute parts without telling you first, and everything is written on the estimate before we start.
It depends on the failure and whether the warranty was registered at installation. ECO’s glass and frame warranties have different durations, and registration is often where homeowners get caught. As an independent ECO Window Systems service provider, we cannot file a claim for you, but we will document the failure, the glass stamp, and the frame condition so you can file without a fight. The Keystone Standard applies to our workmanship regardless.
A standard in-stock replacement is often completed in a single visit. A custom-shaped ECO Window Systems unit, impact-rated and cut to match your existing opening, typically runs four to fourteen weeks depending on the manufacturer’s queue and whether OEM or matched aftermarket is ordered. We will give you a written timeline before any deposit changes hands.
Yes. Impact-rated window and door replacements in Palm Beach require permitting through the local building department, and we pull the permit and schedule the inspection. The cost of permitting is included in our quote. We do not skip inspections, and we do not leave a job until the inspector signs off.
If you have an ECO Window Systems custom or geometric window in Palm Beach that needs attention, call TruePane Windows & Doors at (850) 801-5596. A live person answers, and estimates are free.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.