Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Shingle, Tile & Metal Roofing in Palm Beach: What to Know First
CGI shingle, tile & metal roofing in Palm Beach gets serviced here as an independent CGI provider, not a manufacturer affiliate. We repair and replace CGI roof components on Palm Beach homes, most jobs completed in a single visit with upfront pricing and a written quote before any work starts. If you own a CGI roof in Palm Beach and something is not right, call (850) 801-5596 and a live person answers, 24/7.
This page is for homeowners in Palm Beach who have a CGI roof that is leaking, lifting, corroding, or just aging past its best years. You want to know what is wrong, what it costs, and whether it can be fixed without a full replacement. We will answer those questions straight.
How CGI Products Fail - and How We Fix Them
- CGI Sentinel Shingle: granule loss and nail pops after storm cycles. Palm Beach sits in a wind-driven rain corridor, and CGI Sentinel shingles take a beating from salt air and flying debris. We see granule loss that exposes the asphalt layer, and nail pops where the original installers set fasteners too shallow. Our fix is a spot repair using color-matched Sentinel shingles, re-nailing to code depth, and sealing the surrounding course so the repair does not telegraph through.
- CGI Milano Tile: cracked barrel tiles at the ridge line. The Milano series is a concrete tile with a profile that looks right on Palm Beach homes but takes point load at the ridge cap. We regularly find hairline cracks running from the ridge mortar down the first course. The cause is usually thermal expansion against a rigid mortar bed. We remove the cracked tiles, reset the ridge cap with a flexible bedding compound rated for South Florida heat, and replace only the damaged pieces.
- CGI Standing Seam Metal: panel separation at the eave drip edge. On metal roofs, the eave is where water exits, and it is the first place we see trouble. CGI standing seam panels can separate from the drip edge when the original install did not allow for expansion. Water backs up under the panel and runs into the fascia. We re-secure the panel with a proper expansion cleat and re-seal the seam with a marine-grade sealant that survives Palm Beach humidity.
- CGI Stone-Coated Steel: coating wear at fastener heads. Stone-coated steel looks like shingle but is a steel panel with a granular coating. The weak point is always the fastener. On Palm Beach homes within a mile of the Intracoastal, we see corrosion starting at exposed screw heads within eight to ten years. We replace the fasteners with stainless, touch up the coating with a matched granular slurry, and inspect the surrounding panels for early pitting.
- CGI Barrel Vault Tile: valley flashing failures after heavy rain. Barrel tile valleys channel a lot of water, and CGI’s valley flashing detail is fine when installed perfectly. When it is not, the first heavy Palm Beach storm finds the gap. We re-flash the valley with a heavier-gauge metal, lap it correctly under the tile courses, and test the valley with a hose before we call the job done.
Our CGI Shingle, Tile & Metal Roofing Process
- 1
You call (850) 801-5596. A live person answers, not a recording. We ask what you are seeing and schedule a time that works. We show up when we say.
- 2
We inspect the roof and the underlayment. Our techs walk the roof, check the decking, and document every finding with photos. You get a written report, not a verbal summary.
- 3
We give you a line-item quote on paper. OEM CGI parts where the warranty requires them, quality aftermarket where it does not. You see the difference and decide.
- 4
We do the repair or replacement. Most CGI jobs are single-visit. We protect the surrounding area, seal to manufacturer spec, and clean up before we leave.
- 5
We test and document. Water test on tile and shingle, fastener torque check on metal. You get photos and a written record of what was done.
- 6
We register the work and stand behind it. The Done Right Promise covers workmanship. If it is not done right, we make it right, no paperwork fights.
What CGI Shingle, Tile & Metal Roofing Costs in Palm Beach
CGI roofing work in Palm Beach typically runs $350-$900 for a spot repair, $1,200-$2,800 for a valley or flashing replacement, and $4,500-$9,000 for a partial roof section re-cover on shingle or tile. Full roof replacements start around $18,000 and go up with square footage, pitch, and tear-off complexity. What moves the price is access, underlayment condition, and whether the original install left you with salvageable decking or a full re-deck.
We quote line items, not bundles. You will see the cost of material, labor, and disposal separately. Call (850) 801-5596 for a free estimate. The quote is in writing, and the number does not change unless you change the scope.
Why Palm Beach Homeowners Call TruePane Windows & Doors for CGI Work
Dale Kessler founded this company in 2008 on a simple rule: if the pane is not true, the job is not done. That applies to roofing too. If the frame is right and the glass is rated, the rest is just following through. We treat a CGI roof in Palm Beach the same way we treat an impact window: measure twice, use the right fastener, seal to spec, and put the warranty in writing before the truck leaves.
We are not the cheapest bid in Palm Beach, and we will not pretend to be. What you get is a background-checked, uniformed technician who knows CGI product lines, a written quote with no surprise line items, and a company that has served this community since 2008. We also service PGT, CWS, ES Windows, and ECO Window Systems, so if your roof work turns up a window issue, one call covers it. Seniors and veterans get a permanent 5% discount, and we have never argued a warranty claim that was our fault.
FAQs
No, a proper repair by a competent independent contractor does not void your CGI warranty, as long as OEM parts are used where the warranty specifies them. We use OEM CGI components when the situation calls for it and document the work with photos and a written report. Call (850) 801-5596 and we’ll tell you straight whether your repair is warranty-sensitive.
Most CGI roof repairs in Palm Beach are completed in a single visit, usually four to six hours depending on access and the extent. Larger re-cover sections may take two to three days. We give you a written timeline with the quote and we stick to it. Call (850) 801-5596 to schedule a free estimate.
We use OEM CGI parts when the manufacturer warranty or the profile match requires them, and quality aftermarket parts when they are structurally equivalent and save you money. You see both options on the quote, side by side, and you decide. Call (850) 801-5596 for a line-item quote.
The most common CGI roof problem we see in Palm Beach is valley flashing separation on tile roofs and fastener corrosion on stone-coated steel within a mile of salt water. Both are repairable without a full roof replacement in most cases. Call (850) 801-5596 and we’ll inspect and tell you what you are actually dealing with.
No. We quote line items in writing, and the number holds unless the scope changes or we find hidden decking damage that requires your approval to proceed. If we find something, we stop, show you photos, and get your sign-off before we spend another dollar. Call (850) 801-5596 for a free estimate and see the quote on paper.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.