Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Impact Windows in Palm Beach: What to Know First
We provide independent PGT impact windows service in Palm Beach, from warranty-safe repairs to full-unit replacements, with most jobs completed in a single visit. The honest truth about pricing: PGT impact window work in Palm Beach County runs between $240 and $1,400 per unit depending on whether it’s a hardware repair, seal replacement, or full window swap, and we quote every line item on paper before work begins.
This page is for homeowners who already own PGT products or are considering them, and need a glazier who knows the difference between a WinGuard, a PremierVue, and a Series 200 without looking at a spec sheet. If you have fogged glass, a binding roller, or a frame that leaks during summer downpours, call (850) 801-5596 and a live person answers, any hour, any day.
PGT Products We Service in Palm Beach Homes
PGT has been a Florida impact window workhorse for decades, and Palm Beach homes carry every generation of what they’ve built. The older WinGuard series shows up constantly in houses from the 1990s and early 2000s. Newer homes often carry PremierVue, which pushed the slim-line aesthetic. We also see plenty of Series 200 and Series 300 in mid-market construction, and a growing number of EnergyVue packages where owners ordered impact plus low-e glass in the same unit.
Each line has its own habits. Aluminum-frame WinGuard units from the early 2000s are tanks, but their roller assemblies were commodity parts, and the stainless roller pins wear into the aluminum tracks over time. PremierVue units are built for looks and structural load, but their long latch stiles flex under uneven pressure, and if the original install was out of square, the latch teeth chew themselves up faster than they should.
We are not affiliated with PGT. We are an independent PGT service provider, which means we carry the fix without the franchise markup, and we register every warranty layer we are allowed to register, in writing, before the truck leaves your driveway.
How PGT Impact Windows Fail in Palm Beach - and How We Fix Them
Here is what we actually see in Palm Beach coastal homes, and what we do about it.
- Clouded glass on WinGuard units after 15 to 20 years. The insulated glass unit seal fails at the bottom corner, and Florida humidity does the rest. This is the most common PGT failure we see, and the fix is a new IGU, not a new window. We measure the sight lines, order a PGT-rated replacement unit, and set it with the proper sealant depth.
- Roller pins grinding in aluminum tracks on older Series 200 frames. PGT used a stainless pin in a raw aluminum track, and salt air accelerates the wear. The symptom is a sash that rolls fine at the top but binds at the bottom. We replace the roller assembly with a quality aftermarket part, rebed the track, and it rolls like new.
- PremierVue latch stiles that will not engage cleanly. These units carry a multi-point locking system that depends on the frame being dead square. If a prior install left the frame racked even an eighth of an inch, the tie-down latches misalign. We realign the stile, reset the lock point, and adjust the strike plates so the tie-down engages with one motion.
- Leakage at the head flashing on WinGuard and Series 300 fixed units. In Palm Beach summer storms, water pushes horizontally, not vertically. If the head flashing was not bedded right on the original install, water finds its way behind the frame. We pull the head, inspect the rough opening for rot or corrosion, and reset the flashing with proper end dams and sealant.
- Impact glass failure at the corner after edge impact. PGT laminated glass can crack from a sharp strike near the edge even if the pane holds. A homeowner will see a crescent-shaped crack coming off one corner. The unit did its job, but it’s compromised. We replace the IGU and inspect the frame for any deformation so the next event is fully absorbed.
One thing we see on PGT units in Palm Beach that PGT’s own literature will not tell you: the weep holes on aluminum WinGuard frames collect salt and sand over time, and when they clog, the track holds water after a heavy rain. That standing water is what kills roller assemblies years early. PGT’s drainage design is adequate, but coastal maintenance on weep holes is not optional, and half the PGT frames we service here have never had theirs cleaned.
Our PGT Impact Windows Process
Every PGT job we take follows the same path, because the goal is to fix it once.
- 1
Call us at (850) 801-5596. A live person answers, twenty-four hours a day, seven days a week. We take the details, note the PGT line and the symptom, and book the visit.
- 2
We diagnose, not guess. A background-checked, uniformed technician comes to your Palm Beach home, measures the opening twice, and identifies the root cause. We do not replace a part until we know why it failed.
- 3
Parts decision. We show you the OEM PGT part and a quality aftermarket option where one exists, with the trade-offs in plain terms. If the manufacturer warranty covers the part, we go OEM and handle the paperwork. If it is out of warranty, we are honest about where aftermarket is equal or better.
- 4
The repair or replacement. We do the work right the first time, set the glass true, bed the sealant at the right depth, and torque the hardware to spec.
- 5
Testing and cleanup. We cycle the unit open and closed, simulate water where it matters, and adjust until it is right. Then we clean up the work area completely and leave it better than we found it.
- 6
Register and stand behind it. We register both warranty layers in writing before we leave, and the work is covered by our Done Right Promise. If the pane is not true, the job is not done.
What PGT Impact Windows Costs in Palm Beach
Here is what PGT work on impact windows typically costs in the Palm Beach market, based on what we quote and complete.
- Hardware repair or replacement (roller assembly, latch gear, lock mechanism): $240 to $650 per unit
- IGU replacement for failed seal (fogged glass on impact-rated units): $550 to $2,900 per pane depending on size, glass thickness, and low-e coating
- Full PGT impact window replacement (standard-size aluminum or vinyl unit, installed): $900 to $3,800 per opening
- Full PGT impact window replacement (large openings or unusual custom sizes): $3,500 to $7,500 per opening
- Full-home PGT impact window package (10 to 15 openings): $18,000 to $45,000 depending on window count, glazing, and frame material
What moves the price: glass size, impact rating level, low-e coatings, frame material, and whether the existing opening is square or needs corrective work. Palm Beach coastal exposure also matters, because higher wind zones require heavier glazing, and that changes the IGU cost. We give you the numbers on paper before any work is approved. No change orders, no surprise line items. Call (850) 801-5596 for a free estimate.
Why Palm Beach Homeowners Call TruePane Windows & Doors for PGT Work
When we set a PGT window or door in Palm Beach, we are doing it the way Dale Kessler learned it, on a job site, from a second-generation glazier with a particular eye for square frames and honest work. Our technicians are background-checked and uniformed, and they are trained to treat your home the way they would treat their own mother’s.
We carry PGT lines and the multi-brand backup you need in Palm Beach. If your opening is not right for a PGT replacement, we quote other nameplate options side by side on paper, including CGI, CWS, ES Windows, and ECO Window Systems. You see exactly what you are buying, what it costs, and what it is worth before you spend a dollar. Our Done Right Promise covers the work, and both warranty layers are registered in writing before we leave.
We have served local communities since 2008. We plan to be in Palm Beach for thirty more.
FAQs
If your PGT window is still within the manufacturer warranty period, we handle the warranty claim on your behalf, using OEM parts and following PGT’s specifications so the coverage stays intact. If the warranty has expired, we show you the OEM and quality aftermarket options side by side with prices before any work is approved. Call (850) 801-5596 and we will tell you exactly which parts your unit needs and what is covered.
In most cases, yes. Fogged glass, worn roller pins, and misaligned latch stiles are fixable without replacing the entire window, and we complete most PGT repairs in a single visit. Replacement is the right call only when the frame is racked or the glass is compromised beyond a safe IGU swap. We will tell you which applies to your unit, and quote both paths if either is viable.
Most hardware repairs and IGU replacements on PGT impact windows are completed the same day we arrive, including the testing and the cleanup. Full window replacements take longer only if the rough opening needs corrective framing or custom-size glass has to be ordered. We will give you a straight time estimate when we quote the job, and we will be there when we say.
We use PGT OEM parts whenever your unit is under warranty or when the OEM part is demonstrably better than what is available aftermarket. Where a quality aftermarket part matches or exceeds the PGT original and costs less, we show you both options and let you decide. We never put a gray-market or unrated part in an impact window.
PGT is a large share of what we service in Palm Beach, but we are authorized installers for more than a dozen manufacturer lines, including CGI, CWS, ES Windows, and ECO Window Systems. If your home carries a mix of brands, we can service all of them in the same visit, and we quote new work side by side so you can compare.
When we quote PGT impact windows in Palm Beach, the estimate includes a written line-item price for every part and every labor step, so there are no surprises on the bill. We show you the warranty registration plan and the Done Right Promise in writing. Call (850) 801-5596 to schedule your free estimate.
Contact TruePane Windows & Doors
If you own PGT impact windows in Palm Beach and need an honest diagnosis, straight numbers, and the work done right the first time, call us. We are TruePane Windows & Doors, serving Palm Beach and the surrounding county. A live person answers around the clock at (850) 801-5596. We will be there when we say, quote the job in writing, and stand behind our work with the Done Right Promise.
Written by Dale Kessler, Owner, TruePane Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After